Instructions / Assembly

A
Step 2
Qty. Description
ALLHARDWAREISCOATEDSTAINLESSSTEEL
Tighten all screws
using (2) 1¾” " chair bolts
- Attach back to seat
__(1) Hardware pack
__(2) Angle braces
__(2) Sideframes
__(1) Back
Do not tighten screws until last step
using (6) 1¾” chair bolts
Attach sideframes to seat
Step 1
__(1) Seat
using (2) 2½" chair bolts
- Attach back to sideframes
using (2) 1¾” chair bolts
Attach back to seat
Model: GNB60
Step 3
Step 4
Attach angle brace to front leg then seat
using (4) 8x2" screws
TOOLS NEEDED
11/30/2012
ASSEMBLY INSTRUCTIONS
10
A - 1/4-20 X 1-3/4 WAFER SHCS
4
C - 8 X 2 PHIL FLAT SCREW
2
B - 1/4-20 X 2-1/2 WAFER SHCS
A
A
B
A
A
B
C
C
- 4MM T-HANDLE HEX KEY
(INCLUDED)
- PHILLIPS HEAD SCREWDRIVER
(SCREW GUN RECCOMENDED)