Instructions / Assembly

__(1) Hardware pack

Qty. Description

Model: ADD200

__(1) Chair frame

__(1) Back assembly

top of the back leg using

HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED

(2) .27x2-1/2" Screws

Step 1

into position as shown

slipping bottom in first, then rotate back

Place back assembly in chair frame by

using (2) .27x3" Screws

Attach arms to back assembly

TOOLS NEEDED

Step 3

Step 2

Attach back assembly to seat using

(2) .27x2-1/2" Screws

Atach back assembly to the

4MM HEX KEY, ALLEN, SHORT ARM

(INCLUDED)

9/19/2014

ASSEMBLY INSTRUCTIONS

4MM HEX KEY, ALLEN, T-HANDLE

(INCLUDED)

A - .273 X 2.50 SOCKET WAFER A

B - .273 X 3 SOCKET WAFER A

PAGE 1
Step 1 Place back assembly in chair frame by slipping bottom in first, then rotate back into position as shown Step 2 Attach back assembly to seat using (2) .27x2-1/2" Screws Atach back assembly to the top of the back leg using (2) .27x2-1/2" Screws Model: ADD200 A A __(1) Chair frame __(1) Back assembly __(1) Hardware pack A TOOLS NEEDED A 4MM HEX KEY, ALLEN, T-HANDLE (INCLUDED) 4MM HEX KEY, ALLEN, SHORT ARM (INCLUDED) Step 3 Attach arms to back assembly using (2) .27x3" Screws B Qty.
PAGE 2
Step 1 Attach feet to legs using (4) 3 1/4" Chair bolts. Models: RT248, RCT248, RRT248, RBT248 __(1) Table top __(4) Leg __(2) Foot __(2) Brace __(1) Hardware pack Step 2 Lay the table top on a flat surface. Attach the leg assemblies to the table top using (8) 2 1/2" screws. C A TOOLS NEEDED A 4mm HEX KEY: INCLUDED 4mm HEX KEY, ALLEN, T-HANDLE (INCLUDED) Qty. Step 3 Attach braces to leg assemblies using (4) 3" screws. Set table upright and tighten all bolts Description B A - .
PAGE 3
POLYWOOD @POLYWOODINC youtube.com/polywood POLY-WORLD Blog POLYWOOD To view our full warranty, please visit the warranty page on our website at polywoodinc.com/resources. If you have questions or concerns regarding assembly instructions or missing parts, please contact us at (877) 457-3284 or email support@polywoodinc.