Models: TGD100, TGD101, TGD102 Features 1. No assembly required TGD101 2.
Step 1 Attach back of arm by threading the dowel screw attached to the arm into the pilot hole until the arm is snug against the back leg. Model: TGD200, TGD201, TGD202 ROTATE CLOCKWISE __(1) CHAIR __(2) ARM ASMB (LH/RH) __(1) HARDWARE PACK ROTATE CLOCKWISE PILOT HOLE Step 2 Attach (A) bolts thru the seat frame into the insert nuts on the arm supports TOOLS NEEDED 4mm Hex Key (included) Qty.
Step 1 Attach feet to legs using (8) 2½" Chair bolts. Model: NCCT3772, NCT3772, NCRT3772, NCBT3772 Foot Leg __(1) Table top __(8) Leg __(4) Foot __(4) Brace __(1) Hardware pack C C Brace B Leg Step 2 Lay the table frame on a flat surface. Attach the leg assemblies to the frame using (16) .27x2½" screws - Do not tighten yet. Step 3 Attach braces to the leg assemblies using (8) .27x3" screws Table Frame B A TOOLS NEEDED A 4mm T Handle HEX KEY: INCLUDED Removable table plug included in table. Qty.
