Instructions / Assembly

B-1/4 FLAT WASHER

C-1/4-20 NYLOCK NUT

- 7/16 wrench

- 4mm hex key, allen, t-handle

(incluided)

A-1/4-20 X 1-7/8 WAFER SHCS

9/25/2012

ASSEMBLY INSTRUCTIONS

__(1) Long leg assembly

Qty. Description

Model: SBO22

__(1) Hardware pack

TOOLS NEEDED

__(1) Short leg assembly

with (6) 1-7/8” bolts, nuts and washers

Step 1

Attach long leg assembly to short leg assembly

HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED

PAGE 1
Model: SBO22 __(1) Long leg assembly __(1) Short leg assembly __(1) Hardware pack Step 1 Attach long leg assembly to short leg assembly with (6) 1-7/8” bolts, nuts and washers C B TOOLS NEEDED - 7/16 wrench - 4mm hex key, allen, t-handle (incluided) Qty.
PAGE 2
Step 1 Attach front legs to seat using (6) 1-7/8" bolts, nuts and washer Model: SBA15 Attach long brace using (2) .27x2" screws __(1) Seat __(1) Back __(2) Front legs __(2) Arms __(1) Long brace __(1) Short brace __(1) Hardware pack Wing faces front D,E C B TOOLS NEEDED A Long brace Step 3 Attach back to seat using (2) .27x2" screws Description D,E B A - 7/16 Wrench - 4mm T Handle Hex Key (included) Qty.