Instructions / Assembly

9/17/2012
ASSEMBLY INSTRUCTIONS
Step 1
Model: TWST, BST
Description
without pilot holes
Qty.
A screw gun is required
Phillips head screwdriver
__(1) Hardware pack
Uses (4) 8x3 screws
__(2) Leg assembly
by resting tray on the leg assemblies
8
TOOLS NEEDED
__(2) Trays
Attach a tray to the middle of the leg assemblies
Note:
Trays do not have pilot holes.
Screws go directly into Polywood
ALL HARDWARE IS COATED STAINLESS STEEL
A - 8 X 3 PHIL FLAT SCREW
Step 2
Attach other tray to the top of the leg
assemblies.
Uses (4) 8x3 screws