Instructions / Assembly

A
D
D
D
Removable table plug
included in table.
D
D
D
C
C
B
FINE THREAD
A - 1/4-20 X 1-1/2 WAFER SHCS
1
D - .27 X 3 WAFER SOCKET "A"
6
4
B - 1/4-20 X 2-1/4 WAFER SHCS
FINE THREAD
8
C - 14 X 2.50 HEX WASHER T-A ALCHM
- 4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
Qty. Description
Models: RT236, RCT236,
RRT236, RBT236
Step 2
Lay the table top on a flat surface.
Attach the leg assemblies to the table top using
(8) 2 1/2" hex screws.
Step 3
Attach leg braces using
(4) 3" screws
Attach umbrella brace to
the leg braces using (2) 3" screws.
Install 1 1/2" bolt into threaded insert on
the umbrella brace.
*Please note: umbrella support optional,
can be removed if necessary to fit
umbrella stand
Step 4
Set table upright and tighten all bolts
TOOLS NEEDED
Step 1
Attach feet to legs using
(4) 2 1/4" Chair bolts ( fine thread )
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
__(1) Umbrella Brace
__(1) Hardware pack
ALL HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
- 3/8" Wrench
10/5/2015
ASSEMBLY INSTRUCTIONS