Instructions / Assembly

TOOLS NEEDED
DescriptionQty.
Model: TD101
__(1) Hardware pack
Attach back leg assembly to seat assembly
(INCLUDED)
4mm HEX KEY, ALLEN, T-HANDLE
using (4) 3" screws
__(1) Front assembly
__(1) Back leg assembly
Step 2
__(1) Seat assembly
ALL HARDWARE IS COATED STAINLESS STEEL
__(2) Braces
__(1) Foot rest
Step 1
assembly and with (4) 3" screws
Attach front assembly to the seat
Step 3
Attach braces between the front and back
legs with the remaining (4) 3" screws.
Note:
Angle cut on brace
should be attached to the back leg
11/30/2012
ASSEMBLY INSTRUCTIONS
Angle cut with long edge
on bottom
.27 X 3 SOCKET WAFER A
12

Summary of content (1 pages)