MSDS

Primary Route of Exposure: Inhalation or ingestion of dust
Health Hazard: Breathing dust from this product may cause short-term irritation of the mouth, nose, and throat.
Eye contact with dust from this product may cause mechanical irritation.
Medical Conditions Aggravated by Exposure: Long-term breathing conditions may be aggravated by exposure
to the dust from this product.
Eye Contact: Do not rub eyes, ush with running water, seek medical attention.
Inhalation: Move person to fresh air, seek medical attention.
Ingestion: While unlikely, if it does occur, seek medical attention immediately.
In Case of Spills or Accidental Release: Vacuum or scoop up material. Dispose of in accordance with federal,
state, and local regulations.
Waste Disposal: Dispose as normal refuse, or recycle as HDPE.
Storage Temperature: Store in temperatures less than or equal to 120 F. Do not store near heat, open ames, or
strong oxidants or alkalis. Store at and supported across entire span.
Respiratory Protection: None, unless machining product. A properly tting NIOSHA mask must be worn while
machining this product.
Ventilation: Machine this product only in well ventilated areas. Dust systems are recommended to reduce dust
levels.
Protective Gloves: No special equipment required.
Eye Protection: Wear safety glasses when nailing, cutting or machining this product.
Hygienic Work Practices: Wash hands before eating, drinking, or smoking.
Stability: Stable
Materials to Avoid: Strong oxidizers
Conditions to Avoid: Extreme heat
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide
Trade