Instructions / Assembly

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
CARE AND MAINTENANCE
• Clean the pump regularly depending upon the environment in which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is detected.
• Before cleaning, always disconnect the pump from the power source.
• Remove all parts from the pump and clean in warm, soapy water.
• Remove any large debris from pump barrier bag. Use a garden hose to rinse off any other dirt
from the pump barrier bag.
TROUBLESHOOTING
If the pump fails to operate:
• Check to make sure the power cord is plugged in, the pump is getting power and the pump is
fully submerged.
• Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.
• Remove the inlet screen and/or pump cover, and impeller cover to expose the impeller. Turn
the impeller to ensure that it is not broken or jammed. Also check the ceramic shaft to make
sure that it is not broken.
If the performance of the pump is not satisfactory or the pump does not flow evenly:
• Check to make sure the pump is completely submerged in water.
• Check to make sure the impeller and the housing are clean clear of debris.
• Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.
• Adjust flow control.
• Check to make sure the pump barrier bag is clean.