Installation Guide

ASSEMBLY INSTRUCTIONS

REMOVABLE BATHTUB SEAT

Serie VINYL COAT

G01

TESTED PRODUCT

RECYCLABLE PRODUCT

Thank you for purchasing this Ponte Giulio item. This product is

manufactured in an environmentally conscious manner and in

conformity to the applicable safety requirements.

Ponte Giulio S.p.a.

Località Ponte Giulio

05018 Orvieto (TR) ITALY

http://www.pontegiulio.it/ - Info@pontegiulio.it

Tel.:+39 0763 316044 - Fax:+39 0763 316043

Rev 0 – 14.01.2020

CODE L xL1

lbs

G01JDS29

31 ½ x

13 1/8

9,26 330

= Carico massimo - Max .load-bearing capacity -

Höchstbelastung - Charge maximale - Carga máxima,

= Peso netto - Net weight - Nettogewicht - Poids net - Peso neto

= Leggere attentamente queste istruzioni - Read these

instructions carefully - Lesen Sie dieses Montageblatt

aufmerksam durch - Lire attentivement ces instructions -

Leer atentamente estas instrucciones

= Attenzione al rischio - Beware of the risk

- Vorsicht Gefahr - Attention danger - Atención al riesgo

PAGE 1
L xL1 mm CODE ASSEMBLY INSTRUCTIONS G01JDS29 31 ½ x 13 1/8 REMOVABLE BATHTUB SEAT L1 lbs lbs 9,26 330 L Serie VINYL COAT G01 TESTED PRODUCT = Carico massimo - Max .
PAGE 2
FIELD OF APPLICATION The device is a seat designed and constructed with the sole purpose of facilitating use of the bathtub by elderly and/or disabled people. Room temperature -5°C +40°C. SAFETY, PRECAUTIONS Position the device carefully on the bathtub. Simulate one or more stability tests prior to use. Ponte Giulio shall not be held responsible for improper use of the device. MAINTENANCE Check the device’s stability. CLEANING Use a damp cloth wetted with neutral liquid soap and/or other sanitising product.