Owner's Manual
Replacing the Bench Seat
Don’t put the bench seat in
so
it faces backward,
because it won’t latch that way. If you want more
storage room behind the seat, use the floor pins closer to
the front
of
the vehicle. See “Adjusting Rear Seats” later
in this section.
1. Place the front
hooks
of the bench seat latch onto the
front floor pins.
2.
Push
the rear hooks into the rear
floor
pins, then
push down on the
two
lev’ers to lock the
rear
of
the
bench in place.
3.
Try
to raise the bench seat to check that it
is
locked
down.
1-6