Owner's Manual

Dump and Stow Feature
The second and third row bucket seats have been
designed
to allow them to fold fully upward and forward
when the seats are anchored
in the rear-most position.
This design improves both luggagekargo capacity and
rear seat entry/exit.
To use this feature on RIGHT ONLY seats: Lift the
upper lever to fold the seatback forward. Push the lower
lever back and tilt the entire seat and seatback forward.
To use this feature on CENTER OR LEFT or LEFT
ONLY seats: Lift the upper lever to fold the seatback
forward. Push down on the rear release bar (located
behind the seat), and tilt the entire seat and seatback
forward.
To release the RIGHT ONLY seat from this position:
Push the lower lever back, while
you pull the entire seat
back to the upright position. Lift the upper lever to lift
the seatback up again. Push and pull on the seat and the
seatback to be sure both are locked into position.
To release the CENTER OR LEFT or LEFT ONLY seat
from this position: Push the rear release bar, while you
pull the entire seat back to the upright position. Lift the
upper lever
to lift the seatback up again. Push and pull
on the seat and the seatback
to be sure both are locked
into position.
1-9