Owner's Manual
Cleaning Leather
Care
of
Safety
Belts
Use a soft cloth with lukewarm water and a mild soap or
saddle soap.
For stubborn stains, use a mild solution
of
10%
isopropyl alcohol (rubbing alcohol) and
90%
water.
0
Never
use oils, varnishes, solvent-b.ased or abrasive
cleaners, furniture polish or shoe
polish
on
leather.
0
Soiled leather should be cleaned immediately. If
dirt
is
allowed
to
work into the finish, it can harm the
leather.
Cleaning the
Top
of
the
Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones
or
waxes may cause annoying reflections
in
the windshield
and even make
it
difficult to see through the windshield
under certain conditions
.
Cleaning the Built-In
Child
Restraint
Pad
The built-in child restraint pad is attached to the seat
frame with fastener strips.
You
can remove the pad
and
hand wash it with mild soap and water.
Keep belts clean and dry.
Glass
Glass should be cleaned often.
GM
Glass Cleaner (GM
Part
No.
1050427)
or
a
liquid household glass cleaner
will remove normal tobacco smoke and dust films.
Don’t use abrasive cleaners
on
glass, because they may
cause scratches. Avoid placing decals on the inside rear
window, since they may have
to
be scraped
off
later. If
abrasive cleaners are used
on
the inside
of
the rear
window, an electric defogger element may
be
damaged.
Any temporary license should not be attached across the
defogger grid.
6-46