Owner's Manual
It
is recommended that the upper limit not exceed plus
0.4 degrees from
the
center
of
the bubble. Other drivers
may
flash their high beams
at
you if your adjustment is
much above plus
0.4
degrees.
If you find that the headlamp aiming needs adjustment,
follow
these steps:
Start with the horizontal aim. Don’t try to adjust the
vertical aim first.
1.
Check the horizontal aim indicator. The pointer
should be
lined
up
with
0
(zero).
2.
If
the pointer isn’t at
0 (zero), turn the
horizontal
aiming
screw
to
adjust
the aim.
3.
Check the vertical aim indicator. The bubble should
be centered on
0
(zero).
~1
4.
L-!
If
the bubble isn’t
on
0
(zero), turn
the vertical aiming
screw
to
adjust
the aim.
6-37