Owner's Manual
Replacing the
Third
Row
Solid
Bench Seat
Don’t put the bench seat in
so
it faces backward because
it
won’t
latch
that way.
If
you want more storage room
behind the seat, adjust the seat
by
sliding it forward.
The solid benches have seat position labels, located on
the back of the seat, showing where the
seat
must
go.
Follow that diagram.
Use
all
of
the sets of floor cups
in
the third row,
G,
H,
I
and
J
sets
of
floor cups. See “Seat
Controls” in the beginning of
this
section for more
details. The seat must be placed in the proper
location
for the legs to attach correctly.
Make sure the seat
is
in
the full
rear
position before
beginning this procedure.
1.
Place the front hooks
of
the bench seat onto
the front two
floor
pins
in the
third
row.
To
do
this, the seat will need to
be angled
so
that the
front
hooks
clear
the
floor pins.
2.
With
the seat still folded forward, roll down the gray
handle underneath the seat to lock the front latches.
1-16