Owner's Manual

The access panel for the pollen filter is in the back of the
glove
box.
1. Pull the tab up and out on the outer access panel.
2.
3.
Then squeeze the tab on the left of the inner
access panel.
The first pollen filter will pull straight out. To
remove the second, reach in and slide it towards the
opening. Pull the second filter out.
4.
5.
6.
Replace the filters by reversing Step 3. Make sure
the filters are inserted
so that the sealing foam is
angled in the same direction on both filters.
For the
type
of filter to use, see “Normal Replacement Parts”
in the Index.
Close the inner access door, while squeezing the tab,
to be sure it is tightly closed.
Snap the outer access panel into the back of the
glove box.
6-17