'98 owner's manual A g.
Bv 1-1 The 1998 Pontiac Bonneville Owner’s Manual Seats and Restraint Systems This section tells you how to use your seats and safety belts properly. also It explains the“SRS” system. 2-1 Features and Controls This section explains how to start and operate your vehicle. 3-1 4-1 5- 1 6-1 7-1 8- 1 9-1 Comfort Controls and Audio Systems This section tells you how to adjust the ventilation and comfort controls and how to operate your audio system.
We support voluntary technician certification. GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem and the name BONNEVILLE are registered trademarks of General Motors Corporation. This manual includes the latest information at the timeit was printed.We reserve the right to make changesin the product after that time without further notice. For vehicles first sold in Canada, substitutethe name “General Motorsof Canada Limited”for Pontiac Division whenever it appears inthis manual.
How to Use this Manual Many people read their owner’s manual from beginning to end when theyfist receive theirnew vehicle. If you do this,it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickly. Index A good placeto look for what you needis the Indexin back of the manual. It’s an alphabetical list of what’s in the manual, and the page number where you’ll find it.
Vehicle Damage Warnings Also, in this book you will find these notices: I NOTICE: These mean there is something that could damage your vehicle. iv In the notice area, we tell you about somethingthat can damage your vehicle. Many times, this damage would not be coveredby your warranty, and it could be costly. to do to help avoid But the notice will tell you what the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors orin different words.
Vehicle Symbols These aresome of the symbolsyou may find on your vehicle. These symbols are important for you and your passengers whenever your vehicle is driven: For example, these symbols are used on an original battery: CAUTION POSSIBLE INJURY PROTECT EYES BY SHIELDING CAUSTIC - ~ ~ .
& vi NOTES
I Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your Pontiac and how to use yourbelts safety properly. You can also not do with air bags and safety belts.
Seats and Seat Controls This section tells you about the seats-- how to adjust them-- and also about reclining seatbacks and head restraints. Power Seat (Option) To adjust the power seats on some models: Manual Front Seat A CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The suddenmovement could startle and confuse you, or make you push a pedal when you don’t want to. Adjust the driver’s seat only when the vehicle is not moving.
Power Lumbar Controls (Option) d?Reshapes the lower back areaof the seat. d Reshapes the middle back areaof the seat. Reshapes the upper back areaof the seat. Adjustable Support Seat (Option) & Adjusts the position of the seatback side bolsters. 'd Tilts the rearof the seat up or down. &A Tilts the frontof the seatup or down. Reclining Front Seatbacks On some models, you'll find the controls on the center console. Slide the selector switch toL or Rto choose thefront seat you want to adjust.
I But don’t have a seatback reclinedyour if vehicle is moving. 1-4 Sitting ina reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t its dojob because it won’t be against yourbody. Instead, it will be in front of you. In a crash you could go into it, receiving neckor other injuries. The lap belt can’t do its job either. In a crash the belt could go up over your abdomen.
Head Restraints Slide the head restraint up or down so that the topof the of your ears. This position restraint is closest to the top reduces the chanceof a neck injury in a crash. On some models, the head restraints tilt forward and rearward also. Safety Belts: They’re for Everyone This part of the manual tells you howto use safety belts properly. It also tells you some things you should not do with safety belts. And it explains the Supplemental Restraint System (SRS), or air bag system.
1 & L W FASTEN BELTS I Your vehicle hasa light that comes on as a reminder to buckleup.(See“Safety Belt Reminder Light” in the Index.) Why Safety Belts Work When you ride in or on anything, yougo as fast as it goes. In most states and Canadian provinces, the law says to They work. wear safety belts. Here’s why: You never knowif you’ll be in a crash.If you do have a crash, you don’t know itifwill be a bad one.
Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop.
The person keepsgoing until stoppedby something. In a real vehicle, it could be the windshield ... 1-8 or the instrument panel...
Here Are Questions Many People Ask About Safety Belts-- and the Answers Q; Won’t I be trappedin the vehicle after an accident if I’m wearing a safety belt? A: You could be -- whether you’re wearinga safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious duringand after an accident,so you can unbuckle and get out, ismuch greater if you are belted.
Q: If I’m a good driver, andI never drive farfrom home, why should I wear safety belts? A: You may be an excellent driver, butif you’re in an accident -- even one that isn’t your fault -- you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, suchas bad drivers. Most accidents occur within25 miles (40 km)of home. And the greatest number of serious injuries and deaths occurat speeds of less than 40 mph (65 km/h). Safety belts are foreveryone.
“ .”. .. -. 3. Pick up thelatch plate and pull the belt acrossyou. Don’t letit get twisted. 4. Push the latch plate into the buckle until it clicks. Pull up onthe latch plate to make sure it is secure. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release buttonon the buckleis positioned so you would be able to unbuckle the safety belt quicklyif you ever had to.
Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you. 1-12 To move itdown, squeeze the release handle and move the height adjusterto the desired position.You can move the adjuster upjust by pushing up on the bottom of the release handle. After you move the adjuster to where you want it, try to moveit down without squeezingthe release handleto make sure it has lockedinto position.
Q: What’s wrong with this? A CAUTION: - You can be seriously hurt if your shoulder belt is too loose.In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. A: The shoulder belt istoo loose. It won’t give nearly as much protectionthis way.
Q: What’s wrong with this? A CAUTION: You can be seriously injuredif your beltis buckled in the wrong place like this. In a crash, the beltwould go up over your abdomen. The belt forceswould be there, notat the pelvic bones. This could cause seriousinternal injuries. Always buckle your beltinto the buckle nearest you. I A: I I I I I I I The beltis buckled in the wrong place.
What’s wrong with this? You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chanceof head andneck injury. Also, the beltwould apply too much forceto the ribs, which aren’t as strongas shoulder bones. You could also severely injure internal organs like your liveror spleen. A: The shoulder belt is worn under the ann. It should be worn over the shoulder at all times.
Q: What’s wrong with this? A CAUTION: You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straightso it canwork properly, orask your dealerto fix it. A: The belt is twisted across the body.
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likelyto be seriously injured if they don’t wear safety belts. To unlatch the belt,just push the button on the buckle. The belt shouldgo back outof the way. Before you close the door, be sure the belt is out of the way. If you slam the door onit, you can damage both the belt and your vehicle.
The bestway to protect the fetus isto protect the mother. When a safety belt isworn properly, it’s more likely that the fetus won’t be hurta crash. in For pregnant women, asfor anyone, the key to making safety belts effective is wearing them properly. Reduced-force frontal air bags are designed to help reduce therisk of injury from theforce of an inflating frontal air bag. But even these air bags must inflate very quickly if they are to do their job and comply with federal regulations.
frontal crashes. And, for unrestrained occupants, reduced-force air bags may provide less protection in frontal crashes than more forceful air bags have provided in the past. Everyone in your vehicle should wear a safety belt properly whether or not there’s an air bag forthat person. -- ’A CAUTION: Children who are up against,or very close to,an air bag when it inflates can be seriously injured or killed. This istrue even though your vehicle has reduced-forcefrontal air bags.
AIR BAG 0. 4 There is an air bag readiness lighton the instrument panel, which shows AIR BAG. How the Air Bag System Works The system checks the air bag electrical systemfor malfunctions. The light tells you if there is an electrical problem. See “AirBag Readiness Light”in the Index for more information. Where are the air bags? The driver’s air bag is in the middleof the steering wheel.
‘A I CAUTION: I If something is betweenan occupant andan air bag, the bag might not inflate properly or it might forcethe object into that person. Thepath of an inflatingair bag must be kept clear. Don’t put anything betweenan occupant and an air bag, and don’tattach or putanything on the steering wheel hub or on or near any otherair bag covering. The right front passenger’s air bag is in the instrument panel on the passenger’s side.
When should an air bag inflate? steering wheel andin the instrument panelin front of the right front passenger. An air bag is designed to inflate in a moderate to severe frontal or near-frontal crash. The air bag will inflate How does an airbag restrain? only if the impact speed is above the system’s designed In moderateto severe frontal or near-frontal collisions, a “threshold level.
A new system will include air bag modules and possibly other parts. The service manual for your vehicle covers the needto replace other parts. Air bag inflation doesn’t prevent the driver from seeing or from being able to steer the vehicle, nor does itstop people from leaving the vehicle. 0 A CAUTION: When an air bag inflates,there is dust in theair. This dust could cause breathing problems for people with a historyof asthma or other breathing trouble.
If your vehicle ever gets into a lot of water -- such as water upto the carpetingor higher -- or if water enters your vehicle andsoaks the carpet, theair bag controller can be soaked and ruined.If this ever happens,and then air you start your vehicle, the damage could make the bags inflate, even if there’s no crash. You would have to replace the air bagsas well as the sensors and related in a flood, orif it’s exposed parts.
Lap Belt If your vehicle has front and rear bench seats, someone can sit in the center positions. To make the belt shorter, pull its free end as shown until When you sit ina center seating position,you have alap safety belt, which has no retractor.To make the belt longer, tilt the latch plate and pull it along the belt. the belt is snug. Buckle, position and release it the same way as lap the part of a lap-shoulder belt. If the belt isn’t long enoug see “Safety Belt Extender” at the end of this section.
Rear Seat Passengers Lap-Shoulder Belt The positions next to the windows have lap-shoulder It’s very importantfor rear seat passengers to buckle up! Accident statistics show that unbelted people in the rearbelts. Here’s how to wearone DroDerly. seat arehurt more often in crashesthan those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle ina crash. And they can strike others in the vehiclewho are wearing safety belts.
- .. .. .... .. .. .. ...... . . ... .... . .. ... .. . . b If the belt stops before it reaches the buckle, tilt the 3. To make the lap part tight, pull down on the buckle it. part. end of the belt as you pull up on the shoulder latch plate and keep pulling until you can buckle Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see “Safety Belt Extender” at the end of this section.
The safety belt locks if there’s a sudden stop ora crash. I You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increaseinjury. The shoulder belt should fit against your body. I The lap part of the belt shouldbe worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.And you’d be less likely to slide under the lap belt.
There is one guide for each outside passenger position in for the rear seat.To provide added safety belt comfort children who have outgrown child restraints and for smaller adults, the comfort guides may be installed on the shoulder belts. Here’s how to install a comfort guid and use the safety belt: To unlatch the belt,just push the buttonon the buckle.
2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide of the belt into over the belt, and insert the two edges the slotsof the guide. 1-30 3. Be sure that the belt is not twisted andit lies flat. The elastic cord mustbe under the belt and the guide on top.
Children Everyone in a vehicle needs protection! That includes infants and all children smaller than adult size. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the lawin every state in the United States and in every Canadian province says children up to some age a vehicle.
’A CAUTION: Smaller children and babies should always be restrained in a child or infant restraint. The instructions for the restraint will say whetherit is the right type and size for your child. A very young child’ship bones are so small that a regular belt might not stay low onthe hips,as it should. Instead, the belt will likely be overthe child’s abdomen.In a crash, the belt would apply force righton the child’s abdomen,which could cause serious or fatal injuries.
at only 25mph (40 km/h),a 12-1b. (5.5 kg) baby will suddenly become a 2404b. (110 kg) force on your arms. The baby would be almostimpossible to hold. Secure the baby inan infant restraint. A I Never hold a baby in your armswhile riding in a vehicle. A baby doesn’t weigh much until a crash. During a crash a baby will become so heavy you can’t hold it.
Child Restraints Every time infants and young children in ride vehicles, they should have protection provided by appropriate restraints. @ What are the different typesof add-on child restraints? A: Add-on child restraints are availablein four basic types. When selecting a child restraint, take into consideration not only the child’s weight and size, but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
A rear-facing infant restraint (B) positions an infant to face the rear of the vehicle. Rear-facing infant restraints are designed for infants of up to about 20 lbs. (9 kg) and about one yearof age. This type of restraint faces therear so that the infant’s head, neck and body can have the support they need in a crash. Some infantseats come in twoparts -- the base stays secured in the vehicle and the seat part is removable.
A forward-facing child restraint(C-E) positions a child upright toface forward in the vehicle. These forward-facing restraints are designed to help protect children who are from 20 to 40 lbs. (9 to 18 kg) and about26 to 40 inches (66 to 102 cm) in height, or up to around four years of age. Onetype, a convertible restraint, is designed to be used either as a rear-facing infant seat or a forward-facing child seat.
A booster seat(F, G) is designed for children who are about 40 to 60 lbs. (18 to 27 kg) and about four to eight yearsof age. It’s designed to improve the fit of the vehicle’s safety belt system. Booster seat with shields use lap-only belts; however, booster seats without shields use lap-shoulder belts. Booster seats canalso help achild to see out the window.
When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will havea label saying thatit meets Federal Motor Vehicle Safety Standards. Then follow the instructionsfor the restraint. You may find these instructions on the restraint itself or in a in booklet, or both. These restraints use the belt system your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury.
I Top Strap A child ina child restraint in the center front seat can be badlyinjured by the rightfront passenger air bag if it inflates, even though your vehicle has reduced-force frontal air bags. Never secure a child restraint in the centerfront seat. It’salways better to secure a child restraint in the rear seat. You may secure a forward-facing child restraint in the right front passenger seat,but before you do, alwaysmove the passengerseat as far back as it will go.
If your child restraint has a top strap, your dealer can obtain a kit with anchor hardware and installation instructions specifically designedfor this vehicle. The deder can then install the anchor for you. In Canada, this work will be done for you free of charge. Or, you may install the anchor yourself using the instructions provided in the kit. 2. Pick up the latch plate, and run thelap and shoulder through or portions of the vehicle’s safety belt around the restraint.
4. Buckle the belt. Makesure the release buttonis positioned so you would be ableto unbuckle the safety belt quicklyif you ever had to. 5 . To tighten the belt, pull up on the shoulder belt wh If you’re using you push down on the child restraint. a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 6. Push and pull the child restraint in different directions to be sureit is secure.
To remove the child restraint, just unbuckle the vehicle’s safety belt and let go it back allthe way. The safety belt to work for an adult will move freely again and be ready or larger child passenger. Securing a Child Restraint in the Center Rear Seat Position A child in a childrestraint in the center front seat can be badly injured or killed by the right front passenger air bag if it inflates, even though your vehicle has reduced-force frontal air bags.
f 1. Make thebelt as long as possible by tilting the latch 4. Buckle the belt. Makesure the release buttonis plate and pullingit along the belt. positioned so you would be able to unbuckle the safety belt quicklyif you ever had to. 2. Put the restraint on theseat. 3. Run the vehicle’s safety belt throughor around the restraint. The child restraint instructions will show you how. 5. To tighten the belt, pullits free end while you push down on the child restraint.
To remove the child restraint, just unbuckle the vehicle’s safety belt.It will be readyto work for an adult or larger child passenger. reduced-force frontal air bags. This is because the back of arearfacing child restraintwould be very closeto the inflatingair bag. Always secure a rearfacing child restraint in the rear seat. Securing a Child Restraint in the Right Front Seat Position Your vehicle hasa right front passenger air bag. Never put a rear-facing child restraintin this seat.
A A 4. Buckle the belt. Make sure the release buttonis positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. Pull the rest of the lap belt all the way outof the retractor to set the lock.
Larger Children t' 6. To tighten the belt, feed the lap belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt. Children who have outgrown child restraints should wear the vehicle's safety belts. 7. Push and pull the child restraint in different If you havethe choice, a child should sit next to a directions tobe sure it is secure.
Accident statistics show that children are safer if they are restrained in the rear seat. But they need to use the safety belts properly. Children who aren’t buckled up can be thrown out in a crash. Children who aren’t buckled up can strike other people who are. Never do this. Here two childrenare wearing the same belt. The belt can’t properlyspread the impact forces.In a crash, the two children can be crushed together and seriously injured.A belt must be used by only one personat a time. &.
. /1\ CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt,but the shoulderpart is behind this in the child. If the child wears the belt in way, a crash the child might slide under the belt. The belt’s forcewould then be appliedright on the child’s abdomen.That could cause seriousor fatal injuries. Wherever the child sits,the lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs.
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order youan extender. It’sfree. When you go so the in to order it, take the heaviest coat you will wear, extender willbe long enough for you.The extender will be just for you, andjust for the seat in your vehicle that you choose. Don’t let someone else use it, and use it only for the seatit is made to fit.
&J 1-50 NOTES
Section 2 Features and Controls Here you can learn about the many standard and optional features your onvehicle, and information on starting, is shifting and braking.Also explained are the instrument panel andthe warning systems that tell you if everything working properly-- and what todo if you have a problem.
Keys 'A CAUTION: Leaving young childrenin a vehicle with the ignition keyis dangerous formany reasons. A child or others could be badly injured or even killed. or other They could operate power windows controls or even make the vehicle move. Don't leave the keys in a vehicle with young children.
When a new vehicleis delivered, the dealer removes the plugs from the keys, and gives themthe to first owner. However, the ignition key may not have a plug. If the ignition key doesn’t have a plug, it will have a bar-coded key tag. Each plugor tag has a codeon it that tells your dealer or a qualified locksmith how to make extra keys. Keepthe If you lose your keys, plugs or the tags in a safe place. you’ll be ableto have newones made easily using these plugs or the tag.
Door Locks From the outside,use your door keyor remote keyless entry transmitter,if your vehicle hasthis option. With your door key, turning the key toward the rear of the vehicle will lock the door and turning the key toward the front of the vehicle will unlockit. A CAUTION: ~ I Unlocked doors can be dangerous. Passengers especially children can easily a door is open the doors and fall out. When locked, the inside handle won’t open it.
Power Door Locks Programmable Automatic Door Locks (Option) Close the doors and turn on the ignition. Every time you move the shift lever out of PARK (P), all of the doors will lock. And, every time you stop and move the shift lever intoPARK (P) and turnthe ignition OFF, the doors will unlock.If someone needs to get out while you’re not in PARK (P), have that person use the manual or power lock. When the door is closed again, it will not lock automatically.
Customizing Your AutomaticDoor Locks Feature Vehicles are delivered programmed in Mode 3. You can program the automatic door locks feature to change to the following modes: If your vehicleis equipped with remote keyless entry, use the following procedureto change modes: Mode 2-6 Operation 0 No automatic door lock or unlock. 1 All doors automatically lock when shifted outof PARK (P). No automatic door unlock. 2 All doors automatically lockwhen shifted out of PARK (P).
If your vehicleis not equipped with remote keyless entry, use the following procedure to change modes: 1. Close all doors and turnthe ignition on. Keep all doors closed throughout this procedure. Personalization Programming The delayed locking featurecan be turnedon or off for each driver’s remote keyless entry transmitter. Vehicles are delivered with each remote keyless entry transmitter defaulted with delayed lockingoff. 2.
If your vehicle is not equipped with remote keyless entry, the delayed locking feature can be turnedon or off by using the following procedure: 1. With the ignition on, press and hold the driver's power doorlock switch. All doors will lock. 2. Cycle the headlamp switch four times. On the third cycle, the doors will unlockto confirm that the Your doors will remain feature has been turned on. locked if delayed locking is now in the non-active mode. 3. To change modes, cycle the headlamp switch once more.
The rear doors of your vehicle cannot be opened from inside whenthis feature is in use. If you want to open a rear door whenthe security lock is on: 1. Unlock the door. 2. Then open the door fromthe outside. If you don’t cancelthe security lock feature, adultsor older children who ride the in rear won’tbe able to open the rear doorfrom the inside. You should let adults and older children know how these security locks work, and how to cancelthe locks. To cancel therear door lock: 1.
Remote Keyless Entry (Option) If your vehicle hasthis option, you canlock and unlock your doorsor unlock your trunk from about3 feet (1 m) up to 30 feet (9 m) away using the remote Your Remote Keyless EntrySystem operateson a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies withPart 15 of the FCC Rules.
Operation Resynchronization The driver’s doorwill unlock whenUNLOCK is pressed. Thefuel door will also unlock when UNLOCK is pressed,if you have the optional fuel door lock. If only the instant alarm button works, the rransmitter needs to be resynchronized to the receiver. Do this by pressing and holding boththe LOCK and UNLOCK buttons at the same timefor about eight seconds.You must be within range of the vehicle. If UNLOCK is pressed again withinfive seconds, all doors will unlock.
Security Feedback This provides feedback to the driver when the vehicle receives a command from the key transmitter. The following modes may be selected: Mode 0 2 3 4 5 2-12 Security Feedback No feedback when lockingor unlocking vehicle. No feedback when locking; headlamps and parking lamps flash when unlocking vehicle. Headlamps and parking lampsflash when locking; no feedback when unlocking vehicle. Headlamps and parking lamps flash when locking and when unlocking vehicle.
Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about two years. You can tell the battery is weak if the transmitter won’t If you have to work at the normal range in any location. get close to your vehicle before the trarisrnitter works, it’s probably time to changethe battery. NOTICE: When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter.
Remote Trunk Release Lockout (Option) Trunk The trunk release lockout switchin the trunk allows you to secure itemsin the trunk. By pressing theleft side of To unlock the trunk from the outside, insert the door key the valet switch, the remote trunk release button below and turn it. Push the right the driver’s door armrest will be disabled. side of the valet switchto enable the remotetrunk Remote Trunk Release (Option) release button to work again.
Trunk Lid I It can be dangerous to drive with the trunklid open because carbon monoxide (CO) gas can come into yourvehicle. You can’t see or smell CO. It can cause unconsciousness and even death. If you must drivewith the trunklid open or if electrical wiring or other cableconnections must pass through theseal between the body and the trunk lid: Make sure all windows are shut. I Turn the fanon your heatingor cooling system to itshighest speed with the setting on ECON or VENT.
Parking Lots Universal Theft-Deterrent (Option) If you park in a lot where someone will be watching your vehicle, it’s best to lock it up and take your keys. But what if you have to leave your ignition key? If your vehicle has this option, it has a theft-deterrent alarm system. With this system, the SECURITY light will flash as you open the door (if your ignition is OFF). 0 0 0 0 0 0 If possible, park in a busy, well lit area. Put your valuablesin a storage area, like your trunk or glove box.
If the SECURITY light comes on for one minute and then shutsoff while the ignition is on, the security system has detected a problem with itself. See your dealer for service. If a door or the trunk is opened without the key or remote keyless entry transmitter, or if the door key off. It will also cylinders are damaged, the alarm will go go off if the trunk lock is damaged.Your vehicle’s lamps will flash andthe horn will soundfor one minute, then will go off in order to save battery power.
PASS-Key@I1 Your vehicleis equipped with the PASS-Key11 (Personalized Automotive Security System) theft-deterrent system. PASS-Key II is a passive theft-deterrent system. It works when you insert or remove the key from the ignition. PASS-Key 11uses a resistor pellet in the ignition key that matches a decoder in your vehicle. is When the PASS-Key11system senses that someone using the wrong key, it shuts down the vehicle’s starter and fuel systems.
See your dealeror a locksmith who can service the PASS-Key I1 to have a new key made. If you’re ever driving and the SECURITY light comes on and remainson, you will be able to restart your engine if you turn it off. Your PASS-Key I1 system, however, is not working properly and must be serviced by your dealer. Your vehicleis not protectedby the PASS-Key I1 system. If you lose or damage a PASS-Key I1 ignition key, see your dealeror a locksmith who can service PASS-Key 11to have anew key made.
LOCK (B):The only positionin which you can remove the key.This locks your steering wheel, ignition Ignition Positions With the ignition keyin the ignition switch, you can turn and transaxle. the switch tofive positions. OFF' (C): Unlocks the steering wheel, ignition and transaxle, but does not send electrical power to any C accessories. Usethis position if your vehicle must be pushed or towed, but nevertry to push-start your vehicle.
NOTICE: If yourkey seems stuckin LOCK and you can’t turn it, be sure you are using the correctkey; if so, is it all the way in? If it is, thenturn the steering wheel left andright while youturn the key hard. Butturn the key only with your hand. Using a tool to force it could break thekey or the ignition switch.If none of this works, then your vehicle needs service. Key Reminder Warning If you leaveyour key in the ignition, inthe OFF position, you will hear a warning tone when you open the driver’s door.
Starting Your V6 Engine 1. Without pushing the accelerator pedal,turn your ignition key to START.When the engine starts, let go of the key. The idle speed will go down as your engine getswarm. NOTICE: Holding your key inSTART for longer than 15 seconds at a timewill cause your battery to be drained much sooner. And the excessive heat can damage yourstarter motor. 2. If it doesn’t start right away, hold your key in START for about three tofive seconds at a timeuntil your engine starts.
Engine Coolant Heater(If Equipped) /1\ CAUTION: Plugging the cord into an ungrounded outlet wrong could causean electrical shock. Also, the kind of extension cord could overheat and cause a fire. You could be seriously injured. Plug the cord into a properly grounded three-prong 110-volt AC outlet.If the cord won’t reach,use a heavy-duty three-prong extension cord rated for at least15 amps. In very cold weather,0”F (- 18O C ) or colder, the engine coolant heatercan help.
Automatic Transaxle Operation Your automatic transaxle may have a shift lever located on the console between the seatsor on the steering column. There are several differentpositions for your shift lever. PARK (P):This locks your front wheels.It’s the best position to usewhen you start your engine becauseyour vehicle can’t move easily. 2-24 A CAUTION: It is dangerous to get out of your vehicleif the shift lever is not fullyPARK in (P)with the parking brake firmly set. Your vehiclecan roll.
Ensure theshift lever is fully in PARK (P) range before starting the engine.Your vehicle has a brake-transaxleshift interlock. You have to fullyapply your regular brakes b#ore you can shift from PARK (P) when the ignition key is in an on position.If you cannot shift outof PARK (P), ease pressure on theshift lever -- push the shift lever all the way intoPARK (P) and also release theshift lever button on floorshift console modelsas you maintain brake shift lever into the gear you application.
AUTOMATIC OVERDRIVE (@I):This position is Here are some timesyou might choose DRIVE (D) for normal driving.If you need more powerfor passing, instead of AUTOMATIC OVERDRIVE (0): and you’re: When driving onhilly, winding roads Going less than about 35 mph (55 km/h), push your When towing a trailer, so there is less shifting accelerator pedal about halfway down. between gears 0 Going about 35 mph (55 km/h) or more, push the When going down a steep hill accelerator all the way down.
FIRST (1): This position gives you even more power SECOND (2). You can (but lower fuel economy) than use it on very steep hills, or in deep snowor mud. If the selector leveris put in FIRST (l),the transaxle is going won't shift into first gear until the vehicle slowly enough. Performance Shifting (Option) Press PERFORMSHIFI' to allow the transaxleto shift at higher engine speeds, increasing acceleration performance. An indicator light on the switch will glow when performance shifting is in operation.
Computer Command Ride (Option) Vehicles equipped with computer command ride provide a variety of road improved passenger ride comfort under and driving conditions. For normal driving conditions, press the TOURING RIDE button to geta more refined comfortable ride. handling, When driving conditions require improved press thePERFORM RIDE button to get af m ride.
If you try to drive away with theparking brake on, the brake light stays on and a chime sounds until you release the parking brake. NOTICE: Driving with the parking brake on can cause your rear brakes to overheat. You may haveto replace them,and you could also damage other parts of your vehicle. 3 If you are towing a trailer and are parkingon any hill, see “Towing a Trailer” inthe Index. That section shows what to do first to keep the trailer from moving.
2. Move the shift lever into PARK (P) like this: 0 2-30 Pull the lever toward you. 0 Move the lever up as far as it will go. 3. Move the ignition key to LOCK. 4. Remove the key and take it with you. If you can leave your vehicle with the ignitionkey in your hand, your vehicle is in PARK (P).
Leaving Your Vehicle Withthe Engine Running Console Shift Lever A CAUTION: It can be dangerous to leave your vehicle with the engine running.Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake firmly set. And, if you leave the vehicle with the engine running,it could overheat andeven catch fire.You or others could be injured. Don’t leave your vehicle with the engine running unless you have to. 1.
Torque Lock Shifting Out of PARK (P) If you are parking on hill a and you don’t shift your transaxle intoPARK (P) properly, the weightof the vehicle may put too much force on the parking in pawl the transaxle.You may find it difficult to pullthe shift lever outof PARK (P). This is called “torque lock.”To prevent torque lock,set the parking brake and then shift into PARK (P) properly before you leave the driver’s seat. To find out how,see “Shifting Into PARK (P)” in the Index.
Parking Over Things That Burn Things that can burn could touchhot exhaust parts under yourvehicle and ignite.Don’t park over papers, leaves,dry grass or other thingsthat can burn. Engine Exhaust Engine exhaust can kill. It contains the gas carbon monoxide (CO),which you can’t see or smell. It can cause unconsciousness and death. You might have exhaust coming if: in Your exhaust system sounds strange or different. 0 Your vehicle gets rusty underneath. 0 Your vehicle was damaged ina collision.
- Running Your Engine While You’re Parked It’s better not to park with the engine running. But if you ever have to,here are some things to know. CAUTION: &A Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle(see the earlier Caution under “Engine Exhaust”). Also, idling in a closed-in place can let deadly carbon monoxide(CO)into your vehicle even if the fan switchatisthe highest setting. One place this can happen is a garage.
Windows Power Windows Express-Down Window When the driver’s window switch is held rearward for more than half a second, the window will lower in smaller completely. The window can be opened amounts by pressing the switch rearward and releasing it immediately. To stop the window whileit is lowering, press the switch again, then release.To raise the window, hold the switch forward. Horn Nearly the entire surface of the center padof the steering wheelis an active horn switch.
Tilt Wheel Turn SignallMultifunction Lever A tilt steering wheel allows you to adjust the steering The lever on the left sideof the steering column wheel before you drive. You can also raiseit to the highest level to give your you exit and enter the vehicle. legs more room when and pull the To tilt the wheel, hold the steering wheel lever. Move the steering wheel to a comfortable level, then release the lever to lock the wheel into place.
If the arrows just stay on as you signalturn a or a lane change, a signal bulb may be burned out and other The turn signal has two upward (for right) and two drivers won’tsee your turn signal. Ifyou have the downward (forleft) positions. These positions allow you Driver Information Center,it will tellyou if you have a to signal a turn aorlane change. burned out bulb.See “Driver Information Center” in the Index. To signal a turn, move the lever all way the up or down.
Headlamp HighLow Beam Changer Windshield Wipers To change the headlamps from low beam to high beam or high beam to low beam, pull the turn signal lever toward you. Then release it. When the high beams are on, this lighton the instrument panel will also be on. Flash-To-Pass Feature This feature lets you use your high-beam headlamps to signal a driver in frontof you that you want topass. It works evenif your headlamps areoff.
For steady wiping at low speed, turn the band away LO position. For high-speed wiping turn from you to the the band further,to HI. To stop the wipers, move the band to OW. Windshield Washer At the top of the turn signaVmultifunction lever, there’s a paddle with the word PUSH on it.To spray washer fluid on the windshield, push the paddle for less than a The wiper speed may be set for a long or short delay second. The wipers will clear the window and either between wipes.
Cruise Control I A CAUTION: 0 on the accelerator.This can really helpon long trips. Cruise controldoes not work atspeeds below about 25 mph (40 km/h). When you apply your brakes, the cruise control shuts off. 2-40 Cruise control canbe dangerous whereyou can’t drive safely at a steady speed.So, don’t use your cruise control on winding roads or in heavy traffic. Cruise control canbe dangerous on slippery roads.
Setting Cruise Control ‘A CAUTION: If you leave your cruise control switch on when you’re not using cruise, you might hit a button and go into cruise when you don’t want to. You Keep the could be startled and even lose control. cruise control switchoff until you want to use it. 1. Move the cruise control switch toON. 2. Get up to the speedyou want. 3. Push in theSET button at the endof the lever and release it. 4. Take your foot off the accelerator pedal.
Increasing Speed While Using Cruise Control Passing Another Vehicle While Using Cruise Control There are two ways to goa to higher speed. Use the accelerator pedal to increase your speed. When you take your foot off the pedal,your vehicle will slow down to the cruise control speed you set earlier. Use the accelerator pedal to get to the higher speed. of the lever, then Push in the button at the end release the button and the accelerator pedal. You’ll now cruise at the higher speed.
Exterior Lamps Lamps On Reminder Headlamps If you open the driver’s door while leaving the headlamps from or parking lamps switch on and the key is removed the ignition, you will hear a warning chime.
When theDRL are on, only your low-beam headlamps will be on. The taillamps, sidemarker and other lamps won’t be on. Your instrument panel won’t be lighted either. When it’sdark enough outside, your low-beam headlamps will change tofull brightness. The other also come lamps that come on with your headlamps will on. When it’s bright enough outside, the regular lamps will go off, and your low-beam headlamps change to the reduced brightnessof DRL.
Twilight Sentinel Fog Lamps The fog lamps switchis in the frontof the front reading lamps. An indicator light in the switch will glow when the fog lamps are on. Your low-beam headlamps or parking lamps must beon for your fog lamps to work. If your fog lampsare on when you use your flash-to-pass feature, thefog lamps will be disabled while the flash-to-passfeature is being used. Push in the headlamp switch to turn your headlampsoff.
Twilight sentinel will keep your headlamps for on up to three minutes, to light your way when you leave your vehicle. To operate twilight sentinel,turn the control toMAX for Turn it the other way to reduce the three minute delay. the delay.Turn the control toMIN to turn twilight sentinel off. Also, it’s possible that your headlampsmay go out if you drive fiom a dark area intoa bright area like a lighted parkinglot. If this happens, turn on your headlamps with the regular headlamp switch.
Theater Dimming This feature allows for a three to five-second fade out of the courtesy lamps instead of immediate turn off. Exit Lighting Front Reading Lamps These front readinglamps and the interior courtesy lamps willcome on when you openthe doors. With this feature, the interior lamps will come on for 25 seconds after you remove the key from the ignition. This will give you time tofind the door pull handleor lock switches as you exit the vehicle.
Rear Reading Lamps These overhead lamps and the interior courtesy lamps will come on when you open the doors. Mirrors Inside Daymight Manual Rearview Mirror To turn on the reading lamp when the door is closed, slide the switch up. Slide it down to turn off the lamp. Inadvertent Load Protection This feature automatically shutsoff the interior lampsif any are left onfor more than 10 minutes whenthe ignition is off or a door is left open. This will keep your battery fiom running down.
Electrochromic Daymight Rearview Mirror Mirror Operation To turn on the automatic dimming feature, press (If Equipped) AUTO. To turn off automatic dimming,press OFF. The green indicator light will be illuminated when this feature is active. cc- -1 I Your vehicle may have an automatic electrochromic dayhight rearview mirror. When this feature is turnedon, the mirror automatically changes to reduce glarefrom headlamps behind you. A photocell on the mirror senses when it is becoming dark outside.
Power Remote Control Mirrors (Option) Convex Outside Mirror I Your passenger’s side mirror is convex. A convex mirror’s surface is curved so you can see more from the driver’s seat. A control lever on the driver’s door controlsboth outside rearviewmirrors. A CAUTION: I Turn the lever to the left to select the driver’s side rearview mirror, or to the rightto select the passenger’s push the lever in the side rearview mirror.
Storage Compartments Center Console Cupholder (Option) Press the button at the front edge of the armrest to A open the storage areafor cassette tapes, gloves, etc. Use the door key to lock and unlock the glove box. To cupholder flips forwardfor use. open, lift the latch release on the leftside of the glove Overhead Console box door. Glove Box Card Holder (Option) Sunglasses Storage Compartment (Option) Some models have a storage compartment for glasses in your overhead console.
Rear Storage Compartment Your vehicle has a rear storage armrest with cupholders and a pass-through feature. Pull down the interior door to access the trunk. Convenience Net (Option) Lift the rearof the armrestto reveal the storage space. 2-52 Your vehicle may have a convenience net. You’llsee it just inside the back wallof the trunk. Put small loads, like grocery bags, behind the net. It can help keepthem from falling over during sharp turns or quick starts and stops.
Ashtrays and Cigarette Lighter To use a lighter, just push the center in all the way and let it go. When it is ready, the center will pop backby itself. Pull outthe entire unitto use it. NOTICE: Don’t hold a cigarette lighter in with your hand while it is heating. If you do, it won’t be able to back away from the heating element when it’s ready. That can makeit overheat, damaging the lighter and the heating element. Lift the coverto reveal thefront ashtray.
Air 'Inflator System (Option) A CAUTION: Inflating something too much can make it explode, and you or others could be injured. Be sure to read the inflator instructions, and inflate any object only to its recommended pressure. The air inflator comes with a kit that includes a 20-foot (6.1 m) hose and an air pressure gage, as wellas instructions and special adaptersfor inflating things like an air mattress or a basketball.
Accessory Power Outlet On models withthe overhead console, there is a 12-volt ignition-fed outlet. Slide the cover aside to access the outlet. NOTICE: Adding some electrical equipmentto your vehicle can damageit or keep other things from working as they should, This wouldn’t be covered by your warranty. Check withyour dealer before adding electrical equipment, and never use anything requiring more than 15 amps. Sunroof (Option) Your vehicle may be equipped with an express-open sunroof.
2-56 x
1. 2. 3. 4. Tbilight SentineVHeadlamp Switch Turn SignaVMultifunction Lever Tilt Steering Wheel Lever InstrumentCluster/Gages 5 . Audio System Steering Wheel Controls 6. IgnitionSwitch 7. AirOutlet 8. Climate Control System 9. Glove Box 10.Audio System 11. Hazard Warning Flashers Switch 12.
Instrument Panel Clusters Your instrument panel clusters are designed to let you know at a glance how your vehicle is running. You’ll know how other things you’ll need to drive safelyand economically. fast you’re going, how much fuel you’re using, and many Your vehicle is equipped with oneof these instrument panel clusters,which includes indicator warninglights and gages that are explained on the following pages.
I Cluster with Compass and Gages 2-59
~ _ _ ~~~ Cluster with Compass and Boost Gage 2-60
Speedometer and Odometer Trip Odometer you how far you have driven Your speedometer lets yousee your speed in both miles The trip odometer can tell since you last reset it. (km/h). Your per hour (mph) and kilometers per hour odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). The odometer and trip odometer are displayed in the Driver Information Centeron vehicles so equipped.
Tachometer ’ The tachometer shows your x 1000 n engine speedin revolutions per minute (rpm).Do not run your engine at speeds in the red area. Warning Lights, Gages and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lightsand gages can signal that something is wrong beforeit becomes serious enough to cause an expensive repairor replacement.
Safety Belt Reminder Light When the key is turned RUN to or START, a chime will come onfor about eight seconds to remind people to fasten their safety belts. The safety belt lightwill also come on and stay on for about 70 seconds. If the driver’s beltis already buckled, neither the chime on. nor the light will come Air Bag Readiness Light There is anair bag readiness light onthe instrument panel, which showsAIR BAG. The system checks the air bag’s electrical systemfor malfunctions.
Battery Light (If Equipped) VOLT This light will comeon briefly when you start the show vehicle, as a check to you it is working; thenit should go out. F+I Voltmeter I You have a voltmeter unless you have the supercharged engine. If it stays on, or comes on while you are driving, you may have a problem with the electrical charging system. It could indicate that you have a generator problem or another electrical system problem. Have it checked right away.
Brake System Warning Light Your vehicle’s hydraulic brake system is divided into two parts. If one part isn’t working, the other part can still work andstop you. For good braking, though, you need both parts working well. If the warninglight comes on, there could be a brake problem. Have your brake system inspected right away. BRAKE This light should come on when youturn the key to START. If it doesn’t come on then, haveit fixed so it will be ready to warn you if there’s a problem.
Anti-Lock Brake System WarningLight ANTILOCK (@) With the anti-lock brake system, the light(s) will come on whenyou start your engine and may stay on for several seconds. That’s normal. llraction Control System Warning Light (Option) TRACTION OFF This warning light should come on brieflyas you start the engine. If the light stayson, turn the ignition to OFF. Or, ifthe light comes on when you’re driving, stop as soon as possible and turn the ignition off.
The traction control system warning light may come on for the following reasons: Low Coolant Warning Light(If Equipped) ’ If you turn the system off by pressing the button located on the center console, the warning light will To turn the system backon, come on and stay on. The warning light should go press the button again. off. (See “Traction Control System”in the Index for more information.
Engine Coolant Temperature Gage This gage shows the engine coolant temperature. If the gage pointer moves into the red area, your 280 engine is too hot! On vehicles with the optional DIC, the CHECK GAGES light will go on and a warning chime will sound. Malfunction Indicator Lamp (Check Engine Light) CHECK Your vehicle is equipped with a computer which monitors operationof the fuel, ignition and emission control systems.
If theLight Is Flashing NOTICE: If you keep driving your vehicle with this light on, after a while, your emission controls may not work as well,your fuel economy may not be as good and your engine may not run as smoothly. This could leadto costly repairs that may not be covered by your warranty. The following may prevent more serious damage to your vehicle: Reducing vehicle speed. Avoiding hard accelerations. 0 Avoiding steep uphill grades.
If the Light Is On Steady You may be able to correct the emission system malfunction by considering the following: Did you recently putfuel into your vehicle? If so, be sure tofuel your vehicle with quality fuel (see “Fuel” in the Index). Poor fuel quality will cause your engine not torun as efficiently as designed.You may notice this as stalling after start-up, stalling when you put the vehicleinto gear, misfiring, hesitationon acceleration or stumbling on acceleration.
Oil Pressure Gage The oil pressure gage shows the engine oil pressure in psi (pounds per square inch)when the engine is running. Canadian vehicles indicate pressure in kPa (kiloPascals). Oil pressure mayvary with engine speed, outside temperature andoil viscosity, but readings above the red range. warning zone indicate the normal operating A reading in the red zone may be caused by a dangerously lowoil level or other problem causing DIC, low oil pressure.
Check Oil Level Warning Light CHECK 0I L LEVEL The CHECK OIL LEVEL light turns on for three seconds as a bulb check each time the ignition key is turned to theRUN position. If the light doesn’tturn on, - have your vehicle serviced. If the engine oil is more than one quart (0.
Fuel Gage Here are some things that some owners ask about. None of these show a problem with your fuel gage: UNLEADED FUEL ONLY UNLEADED FUEL ONLY Cluster with Gages Cluster with Compass and Gages 0 At the service station, the gas pump shuts off before the gage readsFULL (F). 0 It takes alittle more or less fuel to fill up than the gage indicated. For example, the gage may have indicated the tank was halffull, but it actually took a little more or less than halfthe tank's capacity tofill the tank.
Boost Gage (Option) Head-Up Display (Option) f X j S T Vehicles equipped withthe supercharged engine have to this boost gage that indicates vacuum during light moderate throttle and boost under heavier throttle. The gage displays theair pressure levelin psi goinginto the engine’s combustion chamber. The gageis automatically centeredat zero psi every is time the engineis started. Actual vacuum or boost displayed from this zero point.
When you sit straightin your seat, theHUD image will appear slightly to theright. CHECK GAGES 0 When the ignition key is turned RUN, to all possible HUD images will come on, then the Head-Up Display will operate normally. If you never look at your instrument panel, you may not see something important, suchas a warning light. So be sure to scan your displays and controls and the driving environmentjust as you would in a vehicle without HUD.
2. Adjust the seat, if necessary, before setting the height control. Slide theIMAGE (image height) control all the way up, raising the imageas far as possible. Thenslide the HUD image height control downso the imageis as low as possible but infull view. 3. Slide the dimmer control downward until the HUD image is no brighter than necessary.To turn the HUD off, slide theHUD dimmer control allthe way down. The HUD controls are located to the left of the steering column. 1.
If you can’t seethe HUD image when the ignition is on, check tosee if: Driver Information Center (Option) DRIVER 0 The headlamps are on. The HUD unit is covered. 0 The HUD dimmer control is adjusted correctly. 0 The HUD image is adjusted tothe proper height. m 0 CHECK OIL LEVEL A fuse in the fuse panel may be blown. See “Fuses and Circuit Breakers” in the Index. If the HUD imageis not clear,it could be too bright. Move the HUD dimmer control further downward. You HUD lens.
FUNCTION MONITOR: This lets you know if you are low on fluids or havea problem with a vehicle function: 0 CHECK OIL LEVEL: This message could mean your oil levelis low. If it comes onfor more than three seconds,see “Check OilLevel Warning Light” in the Index. 0 0 WASHER FLUID: This message means your washer fluidtank is less than about 30 percent full. The windshield portionof the vehicle outline will also glow,If these come on, see “Windshield Washer Fluid” in the Index.
If a bumed-out bulb is replaced, the warning light will stay on until the bulbis used. Bulbs Monitored Message . Both Headlamp High Beams Hi Beam Lamp . . Head Lamp ....... . , Both Headlamp Low Beams Turn Signal ......... .... 1 Front Left Turn/Park 1 Front RightTurn/Park 1 Rear Left Turn 1 Rear RightTurn ..... . 2 Back-up Lamps Back Up . . ....... . . . . . . . . . 4 Tail Only Tail . . . . . . 4 Stop/Tail 2 License Plate 1 Right Rear Sidemarker 1 Left Rear Sidemarker Brake Lamp . . . . . . . . . . . . . .
The earth’s magnetic field is not always the same direction as true north as we know it. So, you must enter a zone numberto tell the compass the difference This tells the between magnetic and actual north. compass wherein the country youare driving. Choosing Your Zone Number The compass shows the zone number in use each time you turn your key on. Thisis above the compass.The number is turnedoff after a few seconds.
Calibrating the Compass Changing Your Zone Number I (MODE) r (iZiF) ZONE OS\ 1. Press and holdthe MODE button until zone andthe zone number appear. 2. Release the MODE button. All electronic compasses need to know the magnetic and is done profile of your car.This is called calibration automatically by your compass.But, the feature is available if you wouldlike to manually calibrate. 3. Press the MODE button until your number appears. 4.
Sometimes, strong magnetic fields can affect the compass. If the CALIBRATE light comes on as shown above, try calibrating the compassas follows: If you put large metal objects like golf clubsin the trunk they could affect accuracy.If the accuracy is close, the compass will adapt tothese objects over time. 1. Drive the car toan open, flat area. If you use an antenna with a magnetic base, it is best to mount it away from the centerof the trunk near the rear window. 2.
b NOTES 2-83
b 2-84 NOTES
v Section 3 Comfort Controls and Audio Systems In this section, you’ll findout how to operate the comfort control and audio systems offered with your vehicle. Be sure to read aboutthe particular systems suppliedwith your vehicle.
Comfort Controls This section tells youhow to make your air system work for you. Your comfort control system uses ozone-friendly R- 134a refrigerant. Temperature Knob of the air The center control regulates the temperature coming through the system.Turn it toward the blue area for coolerair.Turn it toward the red areafor wanner air. With these systems, you can control the heating, cooling Mode Knob and ventilationin your vehicle.
Fan Button The button with the fan symbol adjusts the fan speed. Press the uparrow to increase fan speed and the down arrow to decreasefan speed. 0 ‘fl HEATER: This setting directs warmed air through the floor outlets. Some warm air is diverted to the windshieldto minimize fogging. w. v f l DEFOG: This setting directs air to the HEATER outlets and towardthe windshield. Temperature Button The TEMP button changes the temperature of the air coming through the system.
To find your comfort zone, start with 75" F (24" C) temperature setting and allow about 20 minutes for the system to regulate. Press theTEMP button upor down to adjust the temperature settingif necessary, If you 60°F (15"C),the choose the temperature setting of To avoid blowing coldair in cold weather, the system will delayturning on the fan until warm air is available. The lengthof delay depends onoutside air temperature, the engine engine coolant temperature, and time since was last started.
OFF: Press this button to turn the system off. Fresh air will continue to flow through the vehicle, and the system willtry to maintainthe previously chosen comfort setting.The outside temperature will show in the display whenthe system is off. AIC: Press this button toturn the air conditioning on and off. The system will cool anddehumiw the air inside the vehicle.
When theair conditioning systemis in AUTO mode, the A/C light will always be on. When the ambient 40°F (4"C), the temperature outside the vehicle reaches compressor will remainon continuously. Heating If you have the standard system, on cold days use HEAmR with the temperatureknob in the red area.If you have the electronic system, press AUTO and adjust the temperatureby pressing the TEMP up or down button. You may also adjust the electronic system manually by pressing theMODE button and selecting HEAT.
Your vehicle hasair outlets that allow you to adjust the direction and amountof airflow inside the vehicle. Push the outlet up or down to direct airflow to your preference. Increase or reduce the amount of airflow by opening and closingthe louvers. Opening and closing the louverswill also direct airflow from side-to-side. If you have the rear seat passenger outlet, it's attached to the back of the console.You can adjustthe airflow toward either seating area,the floor or upward.
Defogging and Defrosting Rear Window Defogger On cool, humid days, use DEFOG to keep the windshield andside windows clear. UseDEFROST to remove fogor ice from the windshield quicklyin extremely humid or cold conditions. If you have thestandard system, useDEFOG and adjust the fan speedto your comfort level. UseDEFROST with the temperature toward the red area and the fan control toward high.
E I C E : ~~ Do not try to clear frost or other materialfrom the insideof the rear window with a razor blade or anything else thatis sharp. This may damage the defogger grid. The repairs wouldn’t be covered by your warranty. I Setting the Clock for AM-FM Stereo Press SET. Within five seconds, press and hold the SEEK down arrow until the correct hour appears on the display. Press and hold theSEEK up arrow until the correct minute appears on the display.
AM-FM Stereo Finding a Station AM-FM: Press this button to switch between AM and FM. The display shows your selection. TUNE: Turn the lowerknob to choose radio stations. SEEK: Press the up or down arrow to go to the next higher or lower stationand stay there. PUSHBUTTONS: The four numbered pushbuttons let You can set up to you return to your favorite stations. 14 stations (sevenAM and seven FM).Just: Playing the Radio PWR-VOLUME: This knob turns the system onand off and controls the volume.
In addition to the four stations already set, up to three more stations may be preset on each band by pressing two adjoining buttons at the same time. Just: AM-FM Stereo with Cassette Tape Player (If Equipped) 1. Tune in the desired station. 2. Press SET. (SET will appear on the display.) 3. Press any two adjoining pushbuttons at the same time, within five seconds. Whenever you pressthe same buttons, the station you set will return. 4. Repeat the stepsfor each pair of pushbuttons.
Finding a Station AM-FM: Press this button to switch betweenA M , F M 1 and €342.The display shows your selection. TUNE: Press this knob lightlyr~~ it extends. Turn it to choose radio stations, Push the knob back intoits stored position when you're not using it. SEEK: Press theup or down arrow togo to the next higher or lower stationand stay there. PUSHBUTTONS: The six numbered pushbuttons let you return to your favorite stations. You can set up to 18 stations (six AM, six F M 1 and six FM2). Just: 1.
If any error occurs repeatedly or if an error can’t be If your radio corrected, please contact your dealer. Your tape playeris built to work best with tapes that are displays an error number, writeit down and provideit to 30 to 45 minutes long on each side. Tapes longer than your dealer when reporting the problem. that are so thin they may not work well in this player.
Dolby Noise Reductionis manufactured undera license CLN:If this message appears on the display, the from Dolby Laboratories Licensing Corporation. Dolby cassette tape player needs to be cleaned. It will still play and the double-D symbolare trademarks of Dolby it as soon as possibleto tapes, but you should clean Laboratories Licensing Corporation. prevent damageto the tapes and player.See “Care of Your Cassette Tape Player”in the Index. Afteryou clean REV (5): Press this button to reverse thetap rapidly.
AM-FM Stereo with Cassette Tape Player and Equalizer (If Equipped) Playing the Radio POWER-VOL: Push this knob to turn the system on and off. To increase volume,turn the knob to the right. Turn it to the left to decrease volume. RECALL: Display the time with the ignitionoff by pressing this button. Whenthe ra&o is playing, press this knob to recall the station frequency. Finding a Station AM-FM: Press this buttonto switch between AM, FM1 and FM2. The display showsyour selection.
Adjusting the Speakers BAL: Press this knob lightlyso it extends. Turn it to or right speakers. The middle move the sound to the left position balances the sound between the speakers. FADE: Press this knob lightlyso it extends. Turn it to move the sound to the frontor rear speakers. The middle position balances the sound between the speakers. Push these knobs back into their stored positions when you’re not using them.
NEXT (2): Press this buttonor the SEEK up arrow to FWD (6): Press this buttonto advance quickly to search for the next selection on the tape. If you hold the another partof the tape. Press the button again to return button, the player will continue moving forward through to playing speed. The radio will play the last-selected station while the tape advances. You may select stations the tape.
CD Adapter Kits It is possible to use a CD adapter kit with your cassette on your tape player after activating the bypass feature tape player. AM-FM Stereo with CompactDisc Player (If Equipped) To activate the bypass feature, use the following steps: 1. Turn the ignition to RUN or ACCESSORY. 2. Turn the radio off. 3. Press and hold theTAPEPLAY button for three seconds. The tape symbolon the display will flash for two seconds, indicatingthe feature is active. 4.
Finding a Station Setting the Tone leftincrease or BASS: Slide the lever to the right or to AM-FM: Press this button to switch betweenAM, FMl decrease bass. and FM2.The display shows your selection. TUNE: Press this knob lightlyso it extends. Turn it to TREBLE: Slide the lever to the right orleft to increase or decrease treble.If a station is weak or noisy,you may choose radio stations. Push the knob back into its stored want to decrease the treble. position when you're not using it.
Playing a Compact Disc Insert a disc partway intothe slot, label side up. The player will pullit in. The compact disc symbolwill appear on the display. If the ignition and the radio are CD will appear on the on, the disc will begin playing. display nextto the compactdisc symbol. If you want to insert a disc when the ignitionis off, f i s t press EJECT. The integralCD player can play the smaller 8 cm “single” discs. Full-size compact discs and the smaller discs are loaded in the same manner.
F W D (6): Press and holdthis button to quickly advance within a track. You will hear sound ata reduced volume. The displaywill show elapsed time. RECALL: Press this buttonto see what track is currently playing. PressRECALL again within five seconds to see how long the track has been playing. When a new track starts to play, the track number will also appear. PressRECALL a third time and the time of day will be displayed. AM-FM: Press this button to play the radio whena disc is playing.
Finding a Station Adjusting the Speakers BAL: Press this knob lightlyso it extends. kit to AM-FM: Press this button to switch between AM, FM1 The middle and F”2. The display shows your selection. move the soundto the left or right speakers. position balances the sound between the speakers. T U N E : Press this knob lightlyso it extends.Turn it to FADE: Press this knob lightlyso it extends. Turn it to choose radio stations. Push the knob back into its stored move the soundto the front or rear speakers.
REV (5): Press and holdthis button to quickly reverse If you’re driving ona very rough road or if it’s very hot, within a track. Releaseit to play the passage.You will the discmay not play and E (error) and a number may hear sound ata reduced volume. The displaywill show appear on the radio display.If the disc comes out, it elapsed time. could be that: F W D (6): Press and hold this button to quickly advance 0 The disc is upside down. within a track. You will hear sound ata reduced volume.
Theft-Deterrent Feature THEFTLOCK@is designed to discourage theft of your radio. It works by using a secret codeto disable all radio is removed. functions whenever battery power The THEFTLOCK feature for the radio may be used or ignored. If ignored, the system plays normallyand the radio is not protectedby the feature.If "HEFTLOCK is if stolen.
Unlocking the Theft-Deterrent Feature After a Power Loss Enter your secretcode as follows; pause no more than 15 seconds between steps: 1. LOC appears when the ignitionis on. 2. Press MIN and 000 will appear on the display. 3. Press MIN again to makethe last two digits agree with your code. 4. Press HR to make thefirst one or two digits agree with your code. 5. Press AM-FM after you have confirmed thatthe code matches the secret code you have written down.
Audio Steering Wheel Controls (If Equipped) 1 [f your vehicle hasthis A SEEK t ,t feature, you can control certain radio functions using the buttonson your steering wheel. SEEK: Press the up or down arrow to go to the next higher or lower radio stationand stay there.If a cassette arrow to search for the next tape is playing, press the up down arrow to searchfor selection on the tape. Press the the previous selectionon the tape.
PLAY: Press this button to play a cassette tape or compact disc when the radio is playing. MUTE: Press this button to silence the system. Press it again, or any other radio button, turn to on the sound. Understanding Radio Reception AM The rangefor most AM stations is greater than for FM, especially at night.The longer range, however, can AM can pick cause stations to interfere with each other. Try up noise from things like storms and power lines.
Care of Your Cassette Tape Player NOTICE: A tape player thatis not cleaned regularly can cause Before you add any sound equipment to your vehicle like a tapeplayer, CB radio, mobile telephone or two-way radio be sure you can add what you want. If you can, it’s very important to do it properly. Added sound equipment may interfere with the operationof your vehicle’s engine, Delco Electronics radio or other systems, and even damage them.
When using a scrubbing action, non-abrasive cleaning cassette, itis normal for the cassette to eject because your unit is equipped witha cut tape detection feature To and a cleaning cassettemay appear as a broken tape. prevent the cleaning cassettefrom being ejected, usethe following steps. 1. Turn the ignition to RUNor ACCESSORY. 2. Turn the radiooff. three 3. Press and hold the TAPEPLAY button for seconds. The tape symbolon the display will flash for two seconds. 4.
Fixed Mast Antenna The fixed mast antenna can withstand most car washes without being damaged. If the mast shouldever become slightly bent,you can straighten it outby hand. If the mast is badly bent, as it might be by vandals, you should replace it. is still Check every oncein a while to be sure the mast tightened to the fender. Power Antenna Mast Care Your power antenna will look its best and work well if it’s cleaned from time to time. To clean the antenna mast: 1.
b NOTES 3-31
@% NOTES 3-32
7 Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve also included many other useful tips on driving.
Defensive driving really means “be ready for anytlung.” On city streets,rural roads or freeways,it means “always expect the unexpected.” Assume that pedestriansor other drivers are going to be careless and make mistakes. Anticipate what they might do. Be readyfor their mistakes. Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your Pontiac: Buckle up. (See “Safety Belts”in the Index.
The obvious way to solvethis highway safety problem is for people never to drink alcohol and then drive. But Death and injury associated with drinking and driving is what if peopledo? How muchis “too much”if the a national tragedy. It’s the number one contributor to driver plans to drive? It’slota less than manymight the highway death toll, claiming thousands of victims think. Although it depends on each person and situation, every year. here is some general information on the problem.
Since alcohol is carried in body water, this means thata woman generally will reacha higher BAC level thana man of her same body weight when each has the same number of drinks. The law inmany U.S. states sets the legal limit at a BAC of 0.10 percent. Ina growing numberof U.S. states, and throughout Canada, the limitis 0.08 percent. In some other countries, it’s even lower. The BAC limit for all commercial driversin the United States is 0.04 percent. It’s the amountof alcohol that counts.
The body takes aboutan hour to rid itselfof the alcohol of coffee or number of cold in one drink. No amount showers will speed thatup. “I’ll be careful” isn’t the right answer. What if there’san emergency, a need to take sudden action, as when a child dartsinto the street? A person with even a moderate BAC might not be able to react quickly enough to avoid the collision. There’s somethingelse about drinking and driving that many people don’t know.
Control of a Vehicle Braking You have three systems that make your vehicle go whereBraking action involvesperception time and you want it to go. Theyare the brakes, the steering and reaction time. the accelerator.All three systems haveto do their work First, you have to decide to push on the brake pedal. at the places where the tires meet the road. That’s perception time. Then you haveto bring up your foot and do it. That’s reaction time. Average reaction time is about3/4 of a second.
Avoid needless heavy braking. Some people drive in Anti-Lock Brakes (ABS) spurts -- heavy acceleration followed by heavy Your vehicle has anti-lock brakes(ABS). ABS is an braking -- rather than keeping pace with traffic. This is a mistake. Your brakes may not have time to cool between advanced electronic braking system that will help hard stops.Your brakes will wear out much faster if youprevent a brakingskid. do a lot of heavy braking.
The anti-lock system can change the brake pressure faster than any driver could. The computer is programmed to make the mostof available tire and road conditions. Here’s how anti-lock works. Let’ssay the road is wet. You’re driving safely. Suddenly an animaljumps out in front of you. ABS. You slam on the brakes. Here’s what happens with A computer senses that wheelsare slowing down.
the traction Remember: Anti-lock doesn’t change the time you need If your vehicle is in cruise control when to get your foot up to the brake pedal or always decrease control system begins to limit wheel spin, the cruise control will automatically disengage. When road stopping distance.If you get too close tothe vehicle in it again, you may fiont of you, you won’t have time to apply your brakes conditions allow you to safely use reengage the cruise control.
To turn the systemoff, press the TRACTION CONTROL button located on the console next to the gear shift selector. Steering Power Steering If you lose power steering assist because the engine stops or the systemis not functioning,you can steer but it will take much more effort. Magnasteer TM Your vehicle is equipped with GM Magnasteer m, a the effort you steering system that continuously adjusts feel when steeringat all vehicle speeds.
Experienced driver or beginner, each of us is subjectto The the same lawsof physics when driving on curves. traction of the tires againstthe road surface makesit possible for the vehicle to change its path when you turn the front wheels. If there’s no traction, inertia will keep ever the vehicle going in the same direction. If you’ve tried to steer a vehicle on wet ice, you’ll understand this.
Off-Road Recovery You may find that your rightwheels have dropped off the edge of a road onto the shoulder while you’redriving. I OFF-ROAD RECOVERY / I An emergency likethis requires close attention and a at quick decision.If you are holding the steering wheel the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing to act fast, steer quickly, and either hand. But you have just as quickly straighten the wheel once you have avoided the object.
Passing 0 Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For one thing, following too closely reduces your area of vision, especially if you’re following a larger vehicle. Also, you won’t have adequate space if the a vehicle ahead suddenly slows or stops. Keep back reasonable distance. 0 When it looks like a chance to pass is coming up, start to accelerate but stay in the right lane and don’t so you will be get too close.
0 0 0 0 Check your mirrors, glance over your shoulder, and start your left lane change signal before moving out to pass. When you are far enough of the right lane ahead of the passed vehicleto see its front in your inside mirror, activate your right lane change signal and move back into the right lane. (Remember that your right outside mirroris convex. The vehicle you just passed may seem to be farther away from you than it really is.) Try not to pass more than one vehicle aattime on two-lane roads.
If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go.If you start steering quickly enough, your vehicle may straighten out. Always be ready for a second skid ifit occurs. Of course, tractionis reduced when water, snow, ice, gravel or other materialis on the road. For safety, you’ll want to slow down and adjust your driving to these on slippery conditions.
Here are some tips on night driving. 0 Drive defensively. 0 Don’t drink and drive. 0 Adjust your inside rearview mirrorto reduce the glare from headlamps behind you. 0 Since you can’t seeas well, you may need to you and slow down and keep more space between other vehicles. 0 Slow down, especially on higher speed roads. Your headlamps canlight up onlyso much road ahead. In remote areas, watchfor animals. If you’re tired, pulloff the road in a safe place and rest.
Driving in Rain andon Wet Roads Rain and wet roads can mean driving trouble. Onwet a road, you can’t stop, accelerate or turn as well because your tire-to-road traction isn’t as good as dry on roads. And, if your tires don’t have much tread left, you’ll get even less traction. It’s always wise to go slower and be cautious if rain starts to fall while you are driving. The surface may get wet suddenly when your reflexes are tuned for driving on dry pavement. The heavier the rain, the harder it is to see.
I Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affectyour brakes. Try to avoid puddles. you hit them. But if you can't, try to slow down before 4-18 Wet brakes cancause accidents. They won'twork as well in a quick stop and maycause pulling to one side.You could lose controlof the vehicle. After driving througha large puddleof water or a car wash,apply your brake pedal lightly until your brakeswork normally.
Hydroplaning Driving Through Deep Standing Water Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the water. NOTICE: This can happenif the roadis wet enough and you’re going fast enough. When your vehicle is hydroplaning, If you drive too quickly through deep puddles or it has little or no contact with the road. standing water, water can come in through your Hydroplaning doesn’t happen often.
City Driving Here are waysto increase your safety in city driving: Know the best way to get to where you are going. Geta city map and plan yourtrip into an unknown part of the cityjust as you would for a cross-country trip. 0 Try to use the freeways that rim and crisscross most large cities. You’ll save time and energy.(See the next part, “Freeway Driving.”) Treat a green light as a warning signal. A traffic light is there because the corner is busy enough to need it.
Freeway Driving At the entrance, there is usually a ramp that leads to the freeway. If you havea clear viewof the freeway as you drive along the entrance ramp, you should begin to check traffic. Tryto determine where you expect to blend with the flow. Try to merge into the gap at close on your turn signal, check the prevailing speed. Switch your mirrors and glance over your shoulderoften as as necessary. Try to blend smoothly with the traffic flow.
The exit speedis usually posted. Here are some thingsyou can check beforea trip: Reduce your speed according to your speedometer, not to your senseof motion. After driving for any distance at higher speeds, you may tendthink to you are going slower than you actually are. e Windshield Washer Fluid: Is the reservoirfull? Are Before Leaving on a Long Trip Make sure you’re ready.Try to be well rested.
Highway Hypnosis Hill and Mountain Roads Is there actually sucha conditionas “highway hypnosis”? Or is it just plainfalling asleep at the wheel? Call it highway hypnosis, lackof awareness, or whatever. There is something about an easy stretch of road with of the tires onthe the same scenery, along with the hum of the wind road, the drone of the engine, and the rush against the vehicle that can make you sleepy.
If you drive regularly insteep country, or if you’re planning to visit there, here are some tips that can make your trips safer and more enjoyable. Keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system and transaxle. These parts can work hard on mountain roads. Know how to go down hills. The most important thing to know is this: let your engine do some of the slowing down. Shiftto a lower gearwhen you go down a steep or long hill.
Winter Driving Here are some tips for winter driving: 0 Have your vehicle in good shapefor winter. 0 You may want to put winter emergency supplies in your trunk. Include anice scraper, a small brush or broom, a supply of windshield washer fluid,a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth and a couple of reflective warning triangles.
Driving on Snow or Ice What’s the worst timefor this? “Wet ice.” Very cold snow or ice can beslick and hard to driveon. But wet Most of the time, those places where your tires meet the ice can be even more trouble because it may offer the road probably have good traction. least tractionof all, You can get wetice when it’sabout However, if there is snow or ice between your tires and freezing (32°F; OOC) and freezing rain beginsto fall.
Your anti-lock brakes improve your vehicle’s stability when you makea hard stopon a slippery road. Even though you havethe anti-lock braking system, you’ll want to begin stopping sooner than you would on dry pavement. See “Anti-Lock”in the Index. If You’re Caught ina Blizzard Allow greater following distance on any slippery road. 0 Watch for slippery spots. The road might befine On an until you hit a spot that’s covered with ice.
0 Tie a red clothto your vehicleto alert police that you’ve been stoppedby the snow. Put on extra clothing or wrap a blanket around you. If you have no blankets or extra clothing, makebody insulators from newspapers, burlap bags, rags, floor mats -- anything you can wrap around yourself or tuck under your clothingto keep warm. warm,but be careful. you can run the engine to keep 4-28 Snow can trap exhaust gases under yourvehicle. This can cause deadly CO (carbon monoxide)gas to get inside.
Run your engine only as long as you must. This saves fuel. When you run the engine, make it go a little faster than just idle. Thatis, push the accelerator slightly.This uses less fuelfor .the heat that you get and it keeps the battery charged.You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with your headlamps. Let the heater run for a while. Then, shut the engineoff and close the window almost all the way to preserve the heat.
MFD BY GENERAL MOTORS CORP DATE GVWR GAWR FRT GAWR RR I A CAUTION: Do not load your vehicle any heavier than the GVWR, or either the maximumfront or rear GAWR. If you do, parts on your vehicle can break, or it can change theway your vehicle handles. These could cause you to lose control. Also, overloading canshorten the lifeof your vehicle. THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S. FEDERAL MOTOR VEHICLE SAFETY, BUMPER, AND THEFT PREVENTION STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE.
A CAUTION: Things you put inside your vehiclecan strike and injure people in a sudden stop or turn, or in a crash. Put things in the trunk of your vehicle. In a trunk, put themas far forward as you can. Try to spread theweight evenly. Never stack heavier things, like suitcases, inside the vehicleso that some of them are above the topsof the seats. Don’t leave an unsecured childrestraint in your vehicle. I When you carry something inside the vehicle, secureit whenever you can.
Your vehicle can towa trailer if it is equipped with the proper trailer towing equipment. To identify what the vehicle trailering capacity is for your vehicle, you of the Trailer” should read the information in “Weight is that appears laterin this section. But trailering different thanjust driving your vehicle by itself. Trailering means changesin handling, durability and fuel economy. Successful, safe traileringtakes correct equipment, andit has to be used properly. That’s the reasonfor this part.
Three important considerations have to do with weight: In Canada, write to: General Motorsof Canada Limited 0 the weight of the trailer, Customer Communication Centre e the weight of the trailer tongue 1908 Colonel Sam Drive Oshawa, Ontario L1H8P7 0 and the total weight on your vehicle’s tires. Weight of the Trailer How heavy can a trailer safely be? 1,000 lbs. (450 kg). But It should never weigh more than even that can betoo heavy. It depends on how you plan to use your rig.
Total Weight on Your Vehicle’s Tires Be sure your vehicle’stires are inflatedto the upper limit for cold tires.You’ll find these numberson the Tire Loading Information label locatedat the rear edge of the driver’s dooror see “Loading Your Vehicle’’in the Index. Then be sure you don’t go over the GVW limit of the for your vehicle, including the weight trailer tongue. A B Hitches It’s important to have the correct hitch equipment.
Safety Chains Driving with a Trailer You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue of the trailerso that the tonguewill not drop to the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer. Follow the manufacturer’s recommendation for attaching safety chains and do not attach them to the bumper.
Following Distance Stay at least twice as far behind the vehicle ahead as you would when driving your vehicle withouta trailer. This can help you avoid situations that require heavy braking and sudden turns. Passing Making Tbms NOTICE: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. Your vehicle could be damaged. Avoid making very sharp turns while trailering. You’ll need more passing distance up ahead when you’re towinga trailer.
Tbrn Signals When Towing a Trailer Driving On Grades When you tow a trailer, your vehicle may need a different turn signal flasherand/or extra wiring. Check with your Pontiacdealer. The green arrows on your instrument panel will flash whenever you signal a turn or lanechange. Properly hooked up, the trailer lamps will also flash, telling other drivers you’re about to turn, change lanes or stop. Reduce speed and shift to a lower gear before you start down a long or steep downgrade.
When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: 0 Start your engine; Shift into a gear; and 0 Release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks. 4. Stop and have someone pick up and store the chocks. Maintenance When Trailer Towing Your vehicle will need service more often when you’re pulling a trailer.See the Maintenance Schedulefor more on this.
8azD NOTES 4-39
@% NOTES 4-40
Section 5 Problems on the Road Here you’ll find what to do about some problems can thatoccur on the road.
Hazard Warning Flashers Press the button in to make your front and rear turn signal lamps flash on and off. Your hazard warningflashers work no matter what position your key isin, md even if the key isn't in. To turn off the flashers, pull out on the collar. When the hazard warning flashers are on, your turn signals won't work. Your hazard warningflashers let you warn others. They also let police know you have a problem. Yourfront and rear turn signal lamps will flash on and off.
Other Warning Devices If you carry reflective triangles, you can set one up at the side of the road about300 feet (100 m) behind your vehicle. Jump Starting If your battery hasrun down, you may want to use another vehicle and some jumper cables to start your vehicle. But please follow the steps listed to do it safely. I A CAUTION: Batteries can hurt you. They can be dangerous because: They contain acid that can burnyou. They contain gas that canexplode or ignite.
I 2. Get the vehicles close enoughso the jumper cables can reach, but be sure the vehicles aren’t touching NOTICE: each other.If they are, it could cause ground a connection you don’t want.You wouldn’t be ableto If you leave your radio on, it could be badly start your vehicle, and the bad grounding could damaged. The repairs wouldn’t be covered by damage the electrical systems. your warranty. To avoid the possibilityof the vehicles rolling, set the parking brakef i i y on both vehicles involved in 4.
A CAUTION: ~ 5. Find the positive(+) and negative (-) terminals on each battery. 6. Check that thejumper cables don’t have loose or missing insulation. If they do, you could get shock. a The vehicles could be damaged, too. Using a matchnear a battery can cause battery gas to explode. People have been hurt doing this, Before you connect the cables, here are some basic and some have been blinded. Use a flashlightif (+) will go to things you should know. Positive you need more light.
8. Don’t Iet the other end touch metal. Connectit to the positive(+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 7. Connect the red positive(+) cable to the positive(+) terminal of the vehiclewith the dead battery. Use a remote positive (+) terminal if the vehicle has one. 9. Now connect the black negative (-) cable to the good battery’s negative (-) terminal. Don’t let theother end touch anythinguntil the next step.
13. Remove the cables in reverse orderto prevent they don’t touch electrical shorting. Take care that each otheror any other metal. 10. Attach the cable at least18 inches (45 cm) away from the dead battery, but not near engine parts that move. The electrical connection just is as good there, but the chanceof sparks getting back to the battery is much less. 11. Now start the vehicle with the good battery and run the enginefor a while. 12. Try to startthe vehicle with the dead battery. A.
Towing Your Vehicle Try to have a dealeror a professional towing service tow your vehicle. See “Roadside Assistance” in the Index. If your vehicle has been changed or modified since it was factory-new by adding aftermarket items like fog lamps, aero skirting,or special tires and wheels, these instructions and illustrations may not be correct. Before you do anything, turn on the hazard warning flashers.
A CAUTION: A vehicle can fall fromcar a carrier if it isn’t adequately secured. This can cause a collision, serious personalinjury and vehicle damage. The vehicle should be tightly secured with chains or steel cables beforeit is transported. Don’t use substitutes (ropes, leather straps, canvas webbing, etc.)that can be cutby sharp edges underneath thetowed vehicle. Always use T-hooks insertedin the T-hook slots. Never use J-hooks.
Front Towing (SSE and SSEi Only) NOTICE: Do not tow with sling-type equipmentor fascidfog lamp damage will occur. Use wheel-lift or carcarrier equipment. Additional ramping may be required for carcarrier equipment. Use safety chainsand wheel straps. Towing a vehicle over rough surfaces could damage a vehicle. Damage can occur from vehicle to groundor vehicle to wheel-lift equipment.
Attach T-hook chains on both sides inthe slotted holes in the bottom of the frame, behind the front wheels. These slots are to be used when loading and securingto car-carrier equipment. Attach a separate safety chain around the outboard end of each lowercontrol arm.
Front Towing (SE) Attach T-hook chains on both sidesin the slotted holes in the bottomof the frame, behind the front wheels. These slots areto be used when using sling-type equipment or when loading and securing to car-carrier equipment. Position a 4" x 4" wood beam across sling chains contacting bottomof the radiator support.Position the lower sling crossbar directly under the front bumper.
Rear Towing Tow Limits -- 55 mph (90 M), 500 miles (800 k m ) 3 Attach T-hook chains to slots in the bottomof the floor pan directly aheadof rear wheels on both sides. A 4” x 4 ” wood beam is not needed. Attach a separate safety chain around the outboard end of each controlann.
Position the lower sling crossbar directly behind and at lower edge of rear bumpercover. 5-14 Attach a separate safety chainaround the outboardend of each lower controlarm.
Engine Overheating 1 A CAUTION: You will find a coolant temperature gage or the warning light about a hot engine on your vehicle’s instrument panel. See “Coolant Temperature Gage” and “Coolant Temperature Warning Light” in the Index. If Steam Is Coming From Your Engine I Steam froman overheated enginecan burn you badly, even if youjust open the hood. Stay away from the engine if you see or hear steam coming from it.Just turn it off and get everyone away from the vehicle until it cools down.
If you no longer have the overheat warning, you can drive. Just to be safe,drive slower for about 10 minutes. If you get the overheat waming but or seehear no If the warning doesn’t come back on, you can steam, the problem may not be too serious. Sometimes drive normally. the engine can get a little too hot when you: If the warning continues, pull over, stop, and park your 0 Climb a long hill on a hot day. vehicle right away. 0 Stop after high-speed driving.
Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: A CAUTION: An electric engine cooling fan under the hood can start up even when the engine is not runningand can injure you. Keep hands, clothing and tools away from any underhood electric fan. If the coolant inside the coolant recovery tank is boiling, don’t do anything else until it cools down. L :C A A. Coolant Recovery Tank B. Radiator Pressure Cap C.
A CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Don’t touch them. If you do, you coul be burned. Don’t run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could beburned. Get any leak fied before you drive the vehicle. The coolant level should be at or above the FULL COLD mark.
How to Add Coolant to the Coolant Recovery Tank I NOTICE: If you haven’t found a problem yet, but the coolant level In cold weather, watercan freeze and crack mixture of isn’t at the FULL COLD mark, add50/50 a the engine, radiator, heater core andother parts. clean water (preferably distilled) and DEX-COOL@ Use the recommended coolant and the proper engine coolant atthe coolant recovery tank. (See coolant mixture. “Engine Coolant” in the Index for more information.
A CAUTION: You can be burnedif you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot a hot engine. enough. Don’t spill coolant on When the coolant in the coolant recovery tankis at the FULL COLD mark, start your vehicle. If the overheatwarning continues,there’s one more thing you can try.You can add the proper coolant mixture directlyto the radiator,but be sure the cooling system is cool before you do it. ..
A CAUTION: I Steam and scalding liquids from a hot cooling system can blow out and burn you badly. They are under pressure, andif you turn the radiator pressure cap even a little they cancome out at high speed. Never turn the cap when the cooling system, including the radiator pressure cap, is hot. Wait for the cooling system and radiator pressure cap to cool if you ever have to turn the pressure cap.
How to Add Coolant to the Radiator 2. Then keep turning the pressure cap, butnow push down as you turn it. Remove the pressure cap. 1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise until it first stops. (Don’t press down while turning the pressure cap.) If you hear a hiss, wait for that to stop. A hiss means there is still some pressure left.
3. Fill the radiator with the proper DEX-COOL@ of the filler neck. coolant mixture, up to the base (See “Engine Coolant” inthe Index for more information about the proper coolant mixture.) 4. Then fill the coolant recovery tank to the FULL COLD mark. 5. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off.
6. Start the engine and let it run until you canfeel the upper radiator hose getting hot. Watch out for the engine cooling fans. 7. By this time, the coolant level inside the radiator filler neck may be lower. If the levelis lower, add more of the properDEX-COOL@coolant mixture through thefiller neck until the level reaches the base of the filler neck. 5-24 8. Then replace the pressure cap.At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap.
If a Tire Goes Flat Changing a Flat Tire It’s unusual for a tire to “blow out” while you’re driving,If a tire goesflat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard especially if you maintain your tires properly. If air goes out of a tire, it’s much more likely to leak out slowly. warning flashers. But if you should ever have a “blowout,” here are a few tips about whatto expect and what to do: ‘A .
Removing theSpare Tire and Tools The equipment you’ll need is in the trunk. Pull the carpeting from the floor of the trunk. Turn the center retainer bolt on the spare tire coverto the left (counterclockwise) to remove it. The following steps will tell you how to use thejack and change a tire. 5-26 Lift and remove the cover.See “Compact Spare Tire” later in this section for more information about the compact spare. Remove the spare tirefrom the trunk.
The box that stores the jack and wheel wrenchis located on the passenger side trunk wall. Open thebox and then remove the wing boltby turning itto the left (counterclockwise). Remove the jack and wheel wrench. The tools you'll be using include the jack (A) and wheel wrench (B).
Removing Wheel Covers and Wheel Nut Caps If you have aluminum wheels with nut caps, remove them. To remove the wheelor nut cap covers for your particular vehicle, if you have steel wheels with full plastic wheel covers, loosen each nut cap using the wheel wrench. Please note that nut caps will not remove from the cover completely. If you have aluminum wheels and a center cover hides the wheel nuts, remove the center coverby using the flat end of the wrench topry it off.
Removing the Flat Tire and Installing the Spare Tire 2. Rotate the wheel wrench to the right (clockwise) to raise the jack lift head until it fitsunder the vehicle. 1. Use the wheel wrench to loosen the wheel nuts, but don’t removethem.
A CAUTION: m Getting under a vehicle when it is jacked up is dangerous, If the vehicle slipsoff the jack, you could be badlyinjured or killed. Never getunder a vehicle whenit is supported only by a jack. i A CAUTION: 10” (26 cm) 3. Put thejack head into a notch in the frame which is located near each wheel well. The front notch is 10 inches (25 cm) back from the front wheelwell. The rear notch is 8 inches (20 cm) forwardfrom the rear wheel well. 4.
7. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. I 5. Raise the vehicleby rotating the wheel wrench to the right (clockwise). Raisethe vehicle far enough off the ground so there is enough roomfor the spare tire to fit. 6. Remove all the wheel nuts and take off the flat tire. A CAUTION: Rust or dirton the wheel,or on the parts to which it is fastened,CM make the wheel nuts become looseafter a time. The wheel could come off and causean accident.
'A CAUTION: Never use oil or grease on studs ornuts. If you do, the nuts might come loose.Your wheel could fall off, causing aserious accident. 8. Place the compact spare tire on the wheel-mounting surface. 9. Replace the wheel nuts with rounded endof the nuts toward the wheel. Make sure each wheel bolt is centeredin each wheel hole while tightening the nuts. Tighten each nut by is hand until the wheel held against the hub. 5-32 10.
11. Tighten the wheel nuts firmly in a crisscross sequence. NOTICE: Improperly tightened wheel nuts canlead to brake pulsation and rotordamage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. Don’t try to put the wheel cover on the compact spare tire. It won’t fit. Storethe wheel cover in the trunk until you have replaced the compact spare tire with a regular tire.
When re-installing the full plastic wheel cover, align the valve stem symbol (which is molded into the back side of the cover) with the valve stem. Start the nutcap by pushingit onto thelug nut with the wheel wrench. Tightenthe plastic caps snug using the wheel wrench. Then continue tightening one-quarter turn. Do not over-tighten. 5-34 When re-installing the decorative nut caps on aluminum wheels, tighten the caps snug with the wheel wrench.
Storing the Flat Tireand Tools -A CAUTION: Storing a jack, a tire or other equipment in the passenger compartmentof the vehicle could cause injury. In a sudden stop or collision, loose all these equipment could strike someone. Store in the proper place. After you’ve putthe compact spare tireon your vehicle, you’ll need to store the flat tire in your trunk. Use the following procedure to secure the flat tire in the trunk. Store the flat tire as far forward in the trunkas possible.
Storing the Spar1 rire and Tools I 5 A CAUTION: Storing a jack, a tire or other equipmentin the passenger compartmentof the vehicle could cause injury. Ina sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. 3 4 2 The compact spareis for temporary use only. Replace as you the compact spare tire with a full-size tire as soon can. See “Compact Spare Tire”later in this section.
Compact Spare Tire Although the compact spare tire was fully inflated when your vehicle was new,it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 Wa). After installingthe compact spare on your vehicle, you should stopas soon as possible and make sure your spare tireis correctly inflated.
If You’re Stuck: In Sand, Mud, Ice or Snow What you don’t wantto do when your vehicle is stuck is to spinyour wheels too fast.The method known as “rocking” can help you get out when you’re stuck, but you must usecaution. A CAUTION: If you let your tires spin at high speed, theycan explode, and youor others could be injured. And, the transaxleor other parts of the vehicle can overheat. That could causean engine compartment fireor other damage. When you’re stuck, spin the wheels as little as possible.
Section 6 Service and Appearance Care Here you will find information about the care of your vehicle. This section begins with service and fuel information, and thenit shows how to check important fluid and lubricant levels. Therealso is technical information about your vehicle, and a part devotedto its appearance care.
Service Doing Your Own ServiceWork Your dealer knows your vehicle best and wants you to If you want to do some of your own service work,you’ll want to use the proper Pontiac Service Manual. It tells be happy with it.We hope you’llgo to your dealerfor you much more about howto service your vehiclethan parts and all your service needs. You’ll get genuine GM this manual can.To order the proper service manual, see GM-trained and supported service people. “Service and Owner Publications”in the Index.
/1\ CAUTION: You can be injured and your vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. 0 Be sure you have sufficient knowledge, experience, the proper replacementparts and tools before youattempt any vehicle maintenance task. Be sure touse the proper nuts, bolts and other fasteners. “English” and “metric” fasteners can be easily confused.If you use the wrong fasteners,parts can later break or fall off. You could behurt.
If you have the3800 Supercharged engine(VIN Code l), use premium unleaded gasoline rated at 91 octane or higher. With the3800 Supercharged engine, inan emergency, you may be able to use a lower octane -- as If you low as 87 -- if heavy knocking does not occur. are using91 or higher octane unleaded gasoline and you hear heavy knocking, your engine needs service. At a minimum, the gasoline you use should meet specifications ASTM D4814 in the United States and CGSB 3.5-M93 in Canada.
To provide cleaner air,all gasolines in the United States Fuels in Foreign Countries are now requiredto contain additives that will help If you plan ondriving in another country outside the prevent depositsfrom forming in your engineand fuel United States or Canada, the proper fuel may be hard to system, allowing your emission control system to fuel not function properly. Therefore, you should not have to add find. Never use leaded gasoline or any other recommended in the previous text on fuel.
Fuel Door Lock (Option) On a model equipped with the theft-deterrent system, the fuel dmr is locked and unlocked together with the driver’s power door lock. Therefore, to unlock the fuel filler door, you may use the outside door key lock, the inside power door lock button or the remote keyless entry transmitter. To unlock thefuel door, unlock the driver’s door. Gasoline vaporis highly flammable. It burns violently, and that can cause very bad injuries.
To remove thecap, turn it slowly to theleft (counterclockwise). The cap has a spring in it; if you let go of the cap toosoon, it will spring backto the right. If you get gasoline on yourself and then something ignites it, you could be badly burned. Gasoline canspray out on you if you open the fuel fillercap too quickly.This spray can happen if your tank is nearly full, and is more likely in hot weather. Open the fuel fillercap slowly and wait for any “hiss” noiseto stop. Then unscrew the cap allthe way.
Fuel Door Manual Release (Option) If your vehiclehas a fuel door lock, the fuel door can be opened manually in caseof an electrical power failure. Open the trunk. The release mechanism is on the driver’s sideof the vehicle, at the top of the trunk compartment. Pull the tab rearward to release the fuel door. I NOTICE: Prying on a locked fuel filler door can damage it. Use the remote fuel doormanual release located in the trunk.
Checking ThingsUnder the Hood Filling a Portable Fuel Container I 1 A CAUTION: Never fill a portable fuel container while it is in your vehicle. Static electricity dischargefrom the container can ignite the gasoline vapor. You can be badlyburned and yourvehicle damagedif this occurs. To help avoidinjury to you and others: Dispense gasoline onlyinto approved containers. Do not filla container while it is inside a vehicle, ina vehicle’s trunk, pickup bed or on any surfaceother than the ground.
Hood Release To open the hood, fist pull the hood release handle inside the vehicle. It is next to the parking brake pedal Then go to the front of the vehicle and push up on the secondary hood release. Lift the hood. Before closing the hood, be sure all thefiller caps are on properly. Thenjust pull the hood down and close it firmly.
- 3800 Series I1 Engine (L36 Code K) When you open the hood, you'll see: A. Engine Coolant Recovery Tank B. Battery C. Radiator Pressure Cap D. Engine Oil Dipstick E. Engine Oil Fill Cap E Automatic Transaxle Fluid Dipstick G . Brake Master Cylinder H. Air Cleaner I.
- 3800 Supercharged Engine (L67 Code 1) (If Equipped) When you open the hood, you’ll see: A. Engine Coolant Recovery Tank B. Battery C. Radiator Pressure Cap D. Engine Oil Dipstick E. Engine Oil Fill Cap E Automatic Transaxle Dipstick Fluid G . Brake Master Cylinder H. Air Cleaner I.
Supercharged Engine(If Equipped) You should check your engine oil level regularly; this is an added reminder. Your vehicle may havea 3800 Supercharged engine. The superchargeris a device designed to pump more air It’s a good ideato check your engine oil every time you get fuel.In order to getan accurate reading, the oil must into the engine than it would normally use. This air, level ground. mixed with fuel, creates increased engine power.
Checking Engine Oil Pull out the dipstick and clean it with a paper towelor cloth, then pushit back in all the way. Removeit again, keeping thetip down, and checkthe level. When to Add Engine Oil If the oil is at or below theADD mark, then you’ll need of oil. But you must use the to add at least one quart right kind.This part explains what kind of oil to use. For crankcase capacity, see “Capacitiesand Specifications” in the Index. NOTICE: Don’t add too muchoil.
What Kind of Engine Oil to Use Oils recommended for your vehicle can be identified by looking for the "Starburst" symbol. This symbol indicates that theoil has been certified by the American Petroleum Institute (API). Do not use any oil which does not carry this Starburst symbol. If you change your ownoil, i A be sure you use oil that has the Starburst symbol on the front of the oil container.
As shown in the chart,SAE 1OW-30 is best for your vehicle. However,you can useS A E 5W-30 if it's going to be colderthan 60 "F (16"C) beforeyour next oil change. When it's very cold, you should useS A E 5W-30. These numberson an oil container show its viscosity, or thickness. Do not use other viscosity oils, such as SAE 20W-50. NOTICE: Use only engine oil with the American Petroleum Institute Certified For Gasoline Engines "Starburst" symbol.
If none of them is true, usethe long triphighway maintenance schedule. Change the oil and filter every 7,500 miles (12 500 km) or 12 months -- whichever occurs first. Driving a vehicle with a fully warmed engine under highway conditions causes engine oil to break down slower. Air Cleaner The air cleaner and filter are on the driver’s sideof the engine compartment.
4. After detaching the hosefrom the throttle body and disconnecting the electrical connector, pull back the entire rear portionof the air cleaner by pulling upward and rearward. 2. Remove the air intake hose that is fitted over the throttle body by pulling the hose upward and away from the throttle body which is located near the top of the engine. 3. Disconnect the electrical connector which is attached to the air temperature sensor located in the hose.
/r\ - Supercharger Oil CAUTION: Unless you are technically qualified and have the proper tools, you should let your dealer or a qualified service center perform this maintenance. I Operating the engine with theair cleaner off can cause you or others tobe burned. Theair cleaner not only cleansthe air,it stops flame if the engine backfires. If it isn’t there,and the engine backfires, you could be burned. Don’t drive with it off, and be careful working on the engine with the air cleaner off.
How to Check and Add Oil Automatic Transaxle Fluid Check oil only when the engine is cold. Allow the engine to cool two to three hours after running. When to Check and Change A good time to check your automatic transaxle fluid level iswhen the engine oil is changed. If you remove the superchargeroil €ill plug while the engineis hot, pressure may cause hot oil to blow outof the oil fill hole. You may be burned. Do not remove the plug until the engine cools. 1.
Checking theFluid Level NOTICE: Park your vehicle on a level place. Keep the engine running. Too much or too little fluid can damage your of the transaxle. Too much can mean that some fluid could come out and fall on hot engine parts or exhaust system parts, starting a fire. Be sure to get an accurate readingif you check your transaxle fluid. I I With the parking brake applied, place the shift lever in PARK (P).
If the fluid levelis low, add only enoughof the proper fluid to bring the level into the cross-hatched area on the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at the dipstick hole to bring it to the proper level. It doesn’t take much fluid, generally less than one pint (0.5 L). Don’t oveflll. 2. Push it back in all the way, wait three seconds and then pullit back out again. ~ NOTICE: 3. Check both sidesof the dipstick, and readthe lower level.
Engine Coolant The cooling s stem in your vehicle is filled with DEX-COOL engine coolant. This coolant is designed to remainin your vehicle for 5 years or 150,000 miles (240 000 km) whichever occurs first, if you add only DEX-COOL’ extended life coolant. 8 The following explains your cooling system and how to add coolant when itis low. If you have a problem with engine overheating,see “Engine Overheating” in the Index.
What to Use Use amixture of one-half clean water (preferably distilled) and one-half DEX-COOL@coolant which won’t damage aluminum parts. If you use this mixture, you don’t need to add anything else. Adding only plainwater to your cooling system can be dangerous.Plain water, or some other the proper liquid like alcohol, can boil before coolant mixture will. Your vehicle’s coolant warning systemis set for the proper coolant mixture.
- Checking Coolant LOW COOLANT If this light comes on, it means you’relow on engine coolant. Adding Coolant If you need more coolant, addthe proper DEX-COOL@ coolant mixture ut the coolant recovery tank, but be careful not to spill it. ~~~ When your engineis cold, the coolant level should be at the FULL COLD mark or a little higher. When your engine is warm, the level should be up to FULL the HOT mark or a little higher.
Thermostat You can beburned if you spill coolant on hot engine parts. Coolant contains ethylene glycol, and itwill burn if the engineparts are hot enough. Don’t spill coolant onhot a engine. Engine coolant temperature is controlled by a thermostat in the engine coolant system. The thermostat stops the flow of coolant through the radiator until the coolant reaches a preset temperature.
When to Check Power Steering Fluid Windshield Washer Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. What to Use How To Check Power Steering Fluid When you need windshield washer fluid, be sure to read the manufacturer’s instructions before use.
NOTICE: 0 0 0 0 When usingconcentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluidtank and other parts of the washer system. Also, water doesn’t cleanas well as washer fluid. Fill your washer fluid tank only three-quarters full when it’svery cold. This allows for expansion if freezing occurs, which coulddamage the tank if it is completely full.
There are onlytwo reasons why the brake fluid levelin the reservoir might go down. The first is that the brake fluid goes down toan acceptable level during normal brake lining wear. When new linings are putin, the fluid level goes back up. The other reason is that fluid is leaking out of the brake system.If it is, you should have your brake system fixed, since a leak means that sooner or later your brakes won’t work well, or won’t work alatl. So, it isn’t a good idea to “top off’ your brake fluid.
Brake Wear - NOTICE: 0 0 Using the wrong fluid can badly damage brake system parts.For example, just a few drops of mineral-based oil, suchas engine oil, in yourbrake system can damagebrake system parts so badly that they’ll haveto be replaced. Don’t let someoneput in the wrong kindof fluid. If you spill brake fluid on your vehicle’s painted surfaces, the paint finish can be damaged. Be careful notto spill brake fluid on your vehicle. If you do, washit off immediately.
Some driving conditions or climates may cause a brake Brake Pedal Travel squeal when the brakes are first applied or lightly See your dealer if the brake pedal does not return to applied. This does not mean something is wrong with normal height,or if thereis a rapid increase in pedal your brakes. travel. This could bea sign of brake trouble. See “CaliperKnuckle Maintenance Inspection” in Section 7 of this manual underPart C “Periodic Brake Adjustment Maintenance Inspections.
Battery Bulb Replacement Every new Pontiac has an ACDelco Freedom@ battery. You never have to add waterto one of these. When it’s time for a new battery, we recornend an ACDelco Freedom battery. Get one that has the replacement number shown on the original battery’s label. For any bulb changing procedure not listed in this section, contact your vehicle dealer’s service department.
- Driver’s Side Replacement Passenger’s Side Replacement 1. Reach behind the headlamp assembly and turn the bulb assembly tothe left (counterclockwise) to remove the bulb assembly. 1. Remove the two bolts with a 10 mm socket. 2. Remove the bulb from the assembly. 3. Replace the bulband reverse the steps to install the new bulb assembly.
2. Slide the headlamp assembly outward (to the left) and lift it out. 6-34 3. Tip the assembly and turn the bulb assembly to the left (counterclockwise)to remove it.
Rear Quarter TaiUStophrn SignaVSidemarker Lamps For the proper bulb type, see “Replacement Bulbs” in the Index. 4. Replace the bulb and reverse the steps to install the new bulb assembly. 1. Remove the plastic nut holding the carpeting in place. 2. Pull the carpeting away from the rear corner of the trunk.
3. Turn the bulb socket assembly to the left (counterclockwise) to removeit from the lamp assembly. Turn the bulb one-quarter turnto the left (counterclockwise) to removeit from thesocket. 6-36 4. Replace the bulb and reverse the steps to install the new bulb assembly.
Trunk Mounted Taillamps and Back-up Lamps For the proper bulb type, see “Replacement Bulbs” in the Index. I 2. Pull the push pin with your fingers toremove it. (There arefour pins altogether-- two on the driver’s side and twoon the passenger’s side.) 1. Push in on the center of the plastic push pin with a pen. The push pin should eject.
3. Remove the five nuts that hold the assemblyin place with a 10 mm socket. Pull the carpetup and out of the way to remove the center nut. (There are two nuts on the driver's side, two onthe passenger's side and one in the middle.) 6-38 4. Lift up on both plastic side flaps at the same time (driver's side shown) andlift the assembly out. 5. Carefully let go of the decklid and letit raise completely. The assembly willstill be connected to the wiring harness, but now you will have access to the bulbs.
1 6. Turn the bulb assembly to the left (counterclockwise) to remove it. 7. Pull out the taillamp bulb to remove it.
Windshield Wiper Blade Replacement I 8. If you are replacing the back-up bulb, it must be turned and pulled out to be removed. 9. Reverse the steps to install the new bulb assembly. Replacement blades comein different typesand are to remove removed in different ways. Here’s how the type witha release hole: 1. Pull the windshield wiper arm away from the windshield. 2. Insert a small screwdriver into the hole (A) and pull the blade assemblyoff the wiper arm (B). 3.
For the proper windshield wiper blade replacement length and type,see “Normal Maintenance Replacement Parts” in the Index. Underinflated tires pose the same danger as overloaded tires. The resulting accident could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when yourtires are cold. a Overinflated tiresare more likelyto be cut, puncturedor broken by a sudden impact such as when youhit a pothole.
NOTICE: Don’t let anyonetell you that underinflation or overinflation is all right. It’s not. If your tires don’t have enough air (underinflation), you can get the following: 0 Too much flexing 0 Too much heat Tire overloading Bad wear Bad handling Bad fuel economy. If your tires have too much air (overinflation), you can get the following: Unusual wear Bad handling 0 Rough ride 0 Needless damage from roadhazards. 0 6-42 When to Check Check your tires once a month or more.
Tire Inspection and Rotation Don’t include the compact spare tire your in tire rotation. Tires should be rotated every 6,000 to 8,000 miles (10 OOO to 13 OOO km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See “When It’s Time for New Tires” and “Wheel Replacement” later inthis section for more information.
When It’s Time for New Tires One way to tellwhen it’s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch(1.6 mm) or less of tread remaining. You need anew tire if any of the following statements are true: 0 0 0 0 You can see the indicators at three or more places around the tire. You can see cord or fabric showing through the tire’s rubber. The tread or sidewall is cracked, cut or snagged deep enough to show cord or fabric.
Uniform Tire QualityGrading Mixing tires could cause you to lose control while driving. If you mix tires of different sizes or types (radial and bias-belted tires), the vehicle may not handle properly, andyou could havea crash. Using tires of different sizes may also cause damage to your vehicle. Be sure to use the same size and typetires on all wheels. It’s all rightto drive with your compact spare, though. It was developed for use on your vehicle.
Treadwear The treadwear grade is a comparative rating based on the wear rateof the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear and one a half (1 1/2) times as well on the government course as a tire graded100.
Wheel Alignment and Tire Balance Each new wheel should have the same load-carrying capacity, diameter, width, offset and be mounted the The wheels on your vehicle were aligned and balanced same way as the oneit replaces. carefully at the factory to give you the longest life tire If you need to replace any of your wheels, wheel and best overall performance. bolts or wheel nuts, replace them only with GM new Scheduled wheel alignment and wheel balancing are original equipment parts.
Tire Chains NOTICE: I NOTICE: The wrong wheel can also cause problems with bearing life,brake cooling, speedometeror odometer calibration, headlamp aim, bumper height, vehicleground clearance and tire or tire chain clearanceto the body and chassis. See “Changing a Flat Tire” in the Index for more information. Used Replacement Wheels A CAUTION: Putting a used wheel onyour vehicle is dangerous. You can’t know howit’s been used or how far it’s been driven. It could fail suddenly and cause an accident.
Appearance Care Remember, cleaning products can behazardous. Some are toxic. Others canburst into flameif you strike a match or get them on a hot part of the vehicle. Some are dangerous if you breathe their fumes in a closed space. When you use anything from a container to clean your vehicle, be sureto follow the manufacturer’s warnings and instructions. And always open your doors or windows when you’re cleaning the inside.
Using Multi-Purpose Interior Cleaner .-.. on Fabric 3. If an odor lingers after cleaning vomit or urine, treat the area with waterbaking a soda solution: 1 teaspoon (5 ml)of baking soda to 1 cup(250 ml) of lukewarm water. any ‘loosedirt.! 1. Vacuum and brush the area to remove 2. Always clean a wholetrim panel or section. Mask 4. Let dry. surrounding trim along stitch or welt lines. Stains caused by candy,ice cream, mayonnaise, chili 3.
Care of Safety Belts Cleaning Leather Use a soft cloth with lukewarm water and a mild soap or Keep belts clean and dry. saddle soap and wipe dry with a soft cloth. Then,thelet leather dry naturally. Do not use heat to dry. ~ 0 For stubborn stains, use a leather cleaner. See your dealer for this product. Never use oils, varnishes, solvent-based or abrasive cleaners, furniture polishor shoe polish on leather. Soiled or stained leather should be cleaned immediately.
Cleaning the Outsideof the Windshield and Wiper Blades six months. During very cold, damp weather more frequent applicationmay be required. (See “Recommended Fluids and Lubricants”in the Index.) If the windshield is not clear after using the windshield Cleaning the Outsideof Your Vehicle washer, or if the wiper blade chatters when running, wax, sap or other material may be on the blade or The paintfinish on your vehicle provides beauty, depth windshield. of color, gloss retention and durability.
Cleaning Exterior LampsLenses Use lukewarm or cold water,a soft cloth and a liquid hand, dish or car washing (mild detergent) soap to clean exterior lamps and lenses. Follow instructions under “Washing Your Vehicle.” Finish Care I NOTICE: r -1 Machine compoundingor aggressive polishing on a basecoatklearcoat paint finish may dull the leave swirl finish or marks.
Cleaning Aluminum or Chrome Wheels (If Equipped) Keep your wheels clean usinga soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly,dry with asoft clean towel. A wax may then be applied. The surfaceof these wheelsis similar to the painted surface of your vehicle. Don’t usestrong soaps, chemicals, abrasivepolishes, abrasive cleaners or abrasive cleaning brusheson them because you could damage the surface.
Finish Damage Chemical Paint Spotting Any stone chips, fractures or deep scratches in the finishSome weather and atmospheric conditions can create should be repaired right away. Bare metal will corrode a chemical fallout. Airborne pollutantscan fall upon quickly and may develop into a major repair expense. and attack painted surfaces on your vehicle.
Appearance Care Materials Chart I 16 oz. (0.473 L) I Surface Cleaner See your General Motors Parts Department for these products. 12377984 See “Fluidsand Lubricants” in the Index. I Removes contaminants, blemishes and swirl marks ** Not recommended for use on instrument panel vinyl.
Vehicle Identification Number (VIN) Engine Identification The 8th character in your VIN is the engine code. This code will help you identify your engine, specifications and replacement parts. SAMPLE4UXWM072675 I \ ASSEMBLY ENGINEA9987 CODE MODEL YEAR PLANT Service Parts IdentificationLabel You’ll find this label on your sparetire cover. It’s very helpful if you ever need to orderparts. On this label is: your VIN, This is the legal identifier foryour vehicle.
Electrical System Headlamp Wiring Add-on Electrical Equipment The headlampwiring is protected by an internal the circuit breaker. An electrical overload will cause lamps to go on and off, or in some cases to remain off. If this happens, haveyour headlamp system checked right away. NOTICE: Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty.
Maxifuse@/Relay Center Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of damage causedby electrical problems. Look at the silver-colored band inside the fuse. If the band is brokenor melted, replace the fuse. Be sure you replace a badfuse with a new oneof the identicalsize and rating.
Driver’s Side Fuse Block 1 The driver’s sidefuse block is to the leftof the steering wheel, under the instrument panel. Snap off the cover to reveal the fuses. You’ll find a fuse puller clippedto the insideof the cover. Place the wide end of thefuse puller over the plastic end of the fuse. Squeeze the ends over the fuse and pull it out. in the slots labeled “Spare” on Spare fuses are located the following chart. When finished, replace the cover by snapping it back up into place.
Fuse 1 2 3 4 5 1A 2A 3A 4A 5A 6A 7A 8A 9A 1B 2B 3B 4B Usage Circuit Breaker-Power Sunroof Not Used Power Seats Not Used Not Used PASS-Key Spare Not Used Not Used Automatic A/C Control, Base Cluster, Cruise Control Courtesy Lamps, Power Mirrors Not Used Not Used Not Used Turn Signal, Back-up Lamps, Brake-Transaxle Shift Interlock Spare Not Used Not Used Fuse 5B 6B 7B 8B 9B 1c 2c 3c 4c 5c 6C 7c 8C 9c 1D 2D 3D 4D 5D 6D Usage Anti-LockBrakeSystem,ComputerCommand Ride Brake and Hazard Lamps Not Used Interior
Fuse 7D 8D 9D 1E 2E 3E 4E 5E 6E 7E 8E 9E 6-62 Usage Not Used Radio Not Used Not Used Air Bag System, PASS-Key Not Used Not Used Rear Defog Not Used Non-OBD II Engine Miscellaneous Wipers, Washer Not Used Passenger’s Side Fuse Block Additional fusesare located in the relay center, on the passenger’s side, belowthe instrument panel.You must remove the sound insulatoron the right side of the passenger footwellto replace these fuses. Since replacing thesefuses is difficult.
o n 000 n o Door Locks 2 Trunk Release, RAC 3 Horns 4 Not Used no 5 Miscellaneous Engines Controls(OBD II) 6 Fuel Pump 0 7 Injectors 8 Powertrain Contiol Module 9 Not Used 10 Not Used 11 N C Programmer Q Not Used 0 00 0 on CUM I I POSmONS I Usage 1 000 I Fuse 17 00 0 on 6-63
Replacement Bulbs Outside Lamps Bulb Lamp Message Monitor Front ParkinglTurn Lamps . . . . . . . . . 3 157NA ...... PARK LAMP/TURN SIGNAL Halogen Headlamps Low Beam High Beam .................. 9006.. ...... . . . . . . . . . . . . . . . . 9005 ........ HEADLAMP HIGH-BEAM LAMP Rear ..................... 194 . . . . . . . . Back-up Lamps . . . . . . . . . . . . . . . . 1156 . . . . . . . . Stoplamps ..................... 2057 . . . . . . . . Turn . . . . . . . . . . . . . . . . . . . . . . . . .
Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to “Recommended Fluids and Lubricants” in the Index for more information. Automatic Transaxle (Overdrive) Pan Removal and Replacement........... 6 quarts (6.1L) Complete Overhaul . . . . . . . . . . . . . . . . . . 11 quarts (10.4L) Cooling System ........................ 13 quarts (12.3 L) When drainingor replacing torque converter; more fluid may be needed. CoolingSystem ..........
Engine Specifications Normal Maintenance Replacement Parts 3800 Series I1 Engine (L36) VIN Engine Code . . ................... K . . . . . . . . . . . . . . . . V6 Type . . . . . . . . . . . . 3.8 Liters Displacement . . . . . . . . . . . . . . . . . . . . .205-hp Horsepower . . . . . . . . . . . . . . . . . . . . . . Firing Order ...................... 1-6-5-4-3-2 ThermostatTemperature ........... 195°F (91°C) ~ Vehicle Dimensions 3800 Series I1 Supercharged Engine (L67) VIN Engine Code ..............
L36 Engine Accessory Belt L67 Engine Accessory Belt The L36 engine uses an engine accessory belt. This diagram showsthe features connected and the routing. See “Maintenance Schedule” in the Index for when to check the belt. The Supercharged 3800 (L67) engine uses two accessory drive belts. Theinner belt drives the air generator, power steering pump, coolant pump and conditioning. The outer belt drives the supercharger. Each belt has its own tensioner and idler pulley.
b 6-68 NOTES
Section 7 MaintenanceSchedule This section covers the maintenance required for your Pontiac. Your vehicle needs these servicesto retain its safety, dependability and emission control performance.
c IMPORTANT: I Introduction Your Vehicle and the Environment KEEP ENGINE OIL AT THE PROPER LEVEL AND CHANGE AS RECOMMENDED - GM 1 Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and OwnerAssistance booklet, or your Pontiac dealer for details. 7-2 Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment. All recommended maintenance procedures are important.
“Part B: Owner Checks and Services” tells you what also explains what you should be checked and when. It good condition. can easily do to help keep your vehicle in How This Section isOrganized The remainder of this section is divided into five parts: “Part A: Scheduled Maintenance Services”shows what to have done and how often.
Part A: Scheduled Maintenance Services Using Your Maintenance Schedule We at General Motors wantto help you keep your vehicle in good working condition. But we don’t know exactly how you’ll driveit. You may drive very short distances only a few times a week. Or you may drive long distancesall the time in very hot, dusty weather. You may use your vehiclein making deliveries.Or you may drive it to work, todo errands or in many other ways.
Maintenance Schedule I Short TripKity Definition I Follow the ShortTripKity Maintenance Schedule if any one of these conditionsis true for your vehicle: Most trips areless than 5 to 10 miles (8 to 16 km). This is particularly important when outside temperatures are below freezing. Most trips include extensive idling (such as frequent driving in stop-and-go traffic). Most trips are through dusty areas. You frequently tow a trailer or use a carrier on top of your vehicle.
Maintenance Schedule I Long TripMighway Definition ~ ~~~~ ILong TripMighway. Intervals Follow this maintenance scheduleonly if none of the Every 7,500 Miles (12500 km):Engine Oil and Filter conditions from the ShortTripKity Maintenance Change (or every12 months, whichever occurs first). Chassis Lubrication (or every12 months, whichever Schedule is true. Do not use this schedule if the vehicle occurs first). Tire Rotation.
. Short TripKity Maintenance Schedule The services shown in this schedule up to100,000 miles (166 000 km) should be performed after 100,000 miles (166 000 km) at the same intervals.The services shown at 150,000 miles (240 000 km) should be performedat the same intervalafter 150,000 miles (240 000 km). See “Owner Checks and Services’’ and “Periodic Maintenance Inspections” following. Footnotes The U.S.
1 Short TripKity Maintenance Schedule 3,000 Miles (5 000 km) I DATE I 0 Change engine oiland filter (or every3 months, whichever occursfist). An EmissionControl Service. I 6,000 Miles (10 000 km) I I I DATE I I DATE I DATE I 0 Change engine oiland filter (or every3 months, whichever occursfist). An Emission Control Service. 0 Lubricate chassis components (or every6 months, whichever occurs first). (See footnote#.) 0 Rotate tires.
Short TripKity Maintenance Schedule 0 Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote#.) 0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote++.) 15,000 Miles (25 000 km) I DATE I I DATE I 0 Change engine oil and filter (or every 3 months, whichever occursfist). An Emission Control Service. 0 Inspect air cleaner filterif you are drivingin dusty conditions.
I Short TripKity Maintenance Schedule I 21,000 Miles (35 000 km) 0 Change engine oil and filter (or every 3 months, whichever occursfirst). DATE MILEAGE ACTUAL An Emission Control Service. 24,000 Miles (40 000 km) DATE An Emission Control Service. 0 Lubricate chassis components (or every6 months, whichever occurs first). (See footnote#.) 0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additionalinformation. (See footnote+.) (Also see footnote++.
I Short TripKity Maintenance Schedule 1 30,000 Miles (50000 km) 0 Change engineoil and filter (or every 3 months, whichever occurs first). An Emission ControlService. 0 Lubricate chassis components (orevery 6 months, whichever occurs first). (See footnote#.) 0 Replace air cleaner filter. An Emission ControlService. 0 Inspect fuel tank, cap and linesfor damage or leaks. Inspectfuel cap gasket for any damage. Replaceparts as needed. An Emission ControlSewice. (See footnote?.
I Short Trip/City Maintenance Schedule I 36,000 Miles (60 000 km) DATE 0 Change engine oil and filter (or every 3 months, whichever occursfist). I MILEAGE An Emission Control Service. 0 Lubricate chassis components (or every6 months, whichever occursfirst). (See footnote #.) 0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote++.
I Short TripKity Maintenance Schedule I 45,000 Miles (75000 km) DATE 0 Change engineoil and filter (or every 3 months, whichever occurs first). An Emission ControlService. 0 Inspect air cleaner filter ifyou are driving in dusty conditions. Replace filter if necessary. An Emission ControlService. (See footnote?.) 48,000 Miles (80 000 km) 0 Change engineoil and filter (or every3 months, whichever occurs first). An Emission ControlService.
I Short TripKity Maintenance Schedule I 50,000 Miles (83 000 km) (Continued) - When doing frequent trailer towing. - Uses such as found in taxi, police or delivery service. If you do not useyour vehicle under any of these conditions, the fluid and filter do not require changing. 51,000 Miles (85 000 km) 0 Change engine oil and filter (or every3 months, whichever occurs first). An Emission ControlService. 54,000 Miles (90 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs fist).
I Short TripKity Maintenance Schedule I 60,000 Miles (100 000 km) DATE I 0 Change engine oil andfilter (or every 3 months, whichever occursfist). An Emission ControlService. 0 Lubricate chassis components (or every6 months, whichever occurs first). (See footnote#.) 0 Inspect engine accessory drive belt. An Emission ControlService. Cl Replace air cleaner filter. An Emission Control Service. 0 Inspect fuel tank, cap andlines for damage or leaks. Inspect fuel cap gasket for any damage.
1 I I Short TripKity Maintenance Schedule I 63,000 Miles (105 000 km) I DATE 0 Change engine oil and filter (or every3 months, whichever occurs first). MILEAGE An EmissionControl Service. 66,000 Miles (110 000 km) 0 Change engine oil and filter (or every3 months, whichever occurs first). An EmissionControl Service. 0 Lubricate chassis components (orevery 6 months, whichever occursfirst). (See footnote#.) 0 Rotate tires.
I Short TripKity Maintenance Schedule I 0 Rotate tires. See “Tire Inspection and Rotation”in the Index for proper +.) rotation pattern and additional information. (See footnote (Also see footnote++.) 75,000 Miles (125 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission ControlService. 0 Inspect air cleaner filter ifyou are driving in dusty conditions. Replace filter if necessary. An Emission ControlService.
I I Short TripKity Maintenance Schedule I I 81,000 Mi’les (135 000 km) 17 Change engine oil and filter (or every3 months, whichever occurs first). An Emission Control Service. 84,000 Miles (140 000 km) I DATE I MILEAGE DAW. I DA’IT I 0 Change engineoil and filter (or every3 months, whichever occurs first). An Emission Control Sewice. 0 Lubricate chassis components (or every 6 months, whichever occurs first). (See footnote#.) 0 Rotate tires.
Short TripKityMaintenance Schedule 0 Lubricate chassis components (orevery 6 months, whichever occurs first). (See footnote#.) 0 Replace air cleaner filter. An Emission ControlService. 0 Inspect fuel tank, cap and linesfor damage or leaks. Inspectfuel cap gasket for any damage. Replace parts as needed. An Emission Control Service. (See footnote?.) 0 For supercharged engines only: Check the supercharger oil level and add oil as needed (or every36 months, whichever occursfist).
Short Trip/City Maintenance Schedule 96,000 Miles (160 000 km) 1 DATE 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission ControlService. 0 Lubricate chassis components (or every6 months, whichever occurs first). (See footnote#.) 0 Rotate tires. See “Tire Inspection and Rotation”in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote ++.
I Short TripKity Maintenance Schedule In hilly or mountainous terrain. - When doing frequent trailer towing. - Uses such as found in taxi, police or delivery service. If you do not useyour vehicle under any of these conditions, thefluid and filter do not require changing. - 150,000 Miles (240 000 km) I DATE I 0 Drain, flush and refill cooling system every (or 60 months since last service, whichever occursfist). See “Engine Coolant” in the Index for what to use. Inspect hoses.
Long Tripmighway Maintenance Schedule The services shown inthis schedule up to 100,000 miles (166 000 km) should be performed after 100,000 miles (166 000 km) at the same intervals. The services shown at 150,000 miles (240000 km) should be performed at (240 000 km). the same interval after 150,000 miles See “Owner Checks and Services” and “Periodic Maintenance Inspections” following.
I Long Trip/Highway Maintenance Schedule 7,500 Miles (12 500 km) DATE I DATE I DATE I 0 Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. 0 Lubricate chassis components (orevery 12 months, whichever occurs first). (See footnote#.) 0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.
Long Trip/Hiehwav Maintenance Schedule 22,500 Miles (37 500 km)(Continued) 0 Rotate tires, See “Tire Inspection and Rotation” in the Index for proper +.) rotation pattern and additional information. (See footnote 30,000 Miles (50 000 km) engineoil and filter (or every 12 months, whichever occursfirst). An Emission Control Service. 0 Lubricate chassis components(or every 12 months, whichever occurs first). (See footnote#.) in Index for proper 0 Rotate tires.
Long Trip/Highway Maintenance Schedule 37,500 Miles (62 500 km) I DATE I DATE I DATE I 0 Change engine oil andfilter (or every 12 months, whichever occurs first). An Emission Control Service. 0 Lubricate chassis components (or every 12 months, whichever occursfiist). (See footnote#.) 0 Rotate tires. See “Tire Inspection and Rotation”in the Index for proper rotation pattern and additional information. (See footnote +.
Long Tkip/Highway.Maintenance Schedule 50,000 MiZes (83 000 km) (Continued) - In hilly or mountainous terrain. - When doing frequent trailer towing. - Uses such as foundin taxi, police or delivery service. Ifyou do not use your vehicle under anyof these conditions,the fluid and filter donot require changing. 52,500 Miles (87 500 km) 0 Change engine oil and filter (or every12 months, whichever occurs fist). An Emission ControlService.
Long Trip/Highway Maintenance ‘Schedule 0 For supercharged engines only: Check the supercharger oil level and add oil as needed (or every36 months, whichever occurs first). See “Recommended Fluids and Lubricants”in this section. An Emission ControlService. (See footnote?.) CI Rotate tires. See “Tire Inspection and Rotation”in the Indexfor proper +.) rotation pattern and additional information. (See footnote (Also see footnote++.) 0 Inspect engine accessory drive belt. An Emission ControlService.
1 Long Trip/Highway Maintenance Schedule 75,000Miles (125 000 km) DATE I I DATE I 0 Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. 0 Lubricate chassis components (or every 12 months, whichever occurs fiist). (See footnote#.) 0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) (Also see footnote++.
Long TripLHighway Maintenance Schedule 0 Replace air cleaner filter. An Emission ControlService. 0 Inspect fueltank, cap and linesfor damage or leaks. Inspectfuel cap gasket for any damage. Replaceparts as needed. An Emission ControlService. (See footnote.)..) as 0 For supercharged engines only: Check the supercharger oil level andoiladd needed (or every36 months, whicheveroccws fist). See “Recommended Fluids and Lubricants” inthis section. An Emission ControlService. (See footnote.)..) 0 Rotate tires.
Long Trip/Highway Maintenance Schedule 100,000 Miles (I 66 000 km) Inspect spark plug wires. An Emission Control Service. Replace spark plugs. An Emission Control Service. Change automatic transaxle fluid and filter if the vehicle is mainly driven under oneor more of these conditions: - In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher. - In hilly or mountainous terrain. - When doing frequent trailer towing. - Uses such as found in taxi, police or delivery service.
Part B: Owner Checks and Services Listed below are owner checks and services which should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your vehicle. Windshield Washer Fluid Level Check Check the windshield washer fluid level in the if windshield washer tank and add the proper fluid necessary. See “Windshield Washer Fluid” in the Index for further details. Be sure any necessary repairs are completed at once.
At Least Twice a Year At Least Once a Year Key Lock Cylinders Service Restraint System Check Lubricate the key lock cylinders with the lubricant Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are specified inPart D. working properly. Look for any other looseor damaged Body Lubrication Service safety belt system parts.If you see anything that might keep a safety belt system from doing its job, have it Lubricate all body door hinges.
Starter Switch Check A CAUTION: When you are doing this check, the vehicle could move suddenly.If it does, youor others could be injured. Follow the steps below. 1. Before you start, be sure you have enough room around the vehicle. 2. Firmly apply boththe parking brake (see “Parking Brake” in the Index if necessary) and the regular brake. Brake-Transaxle Shift Interlock(BTSI) Check I A CAUTION: When you are doing this check, the vehicle could move suddenly. If it does, you or others could be injured.
Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition key to LOCK in each shift lever position. 0 0 The key should turn to LOCK only when theshift lever isin PARK (P). The key should come out only in LOCK. Parking Brake and Automatic TransaxlePARK (P) Mechanism Check 1 A CAUTION: l When youare doing this check, your vehicle could begin to move. Youor others could be injured and property could be damaged.
Part C: Periodic Maintenance Inspections Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should letyour dealer’s service department sure or other qualified service center do these jobs. Make any necessary repairsare completed at once. Proper procedures to perform these services may be found in a service manual. See “Service and Owner Publications” in the Index. Exhaust System Inspection Inspect the complete exhaust system.
Brake System Inspection Inspect the complete system. Inspect brakelines and hoses for proper hook-up, binding, leaks, cracks, for wear and rotors chafing, etc. Inspect disc brake pads for surface condition.Also inspect drum brakelinings for wear and cracks. Inspect other brake parts, including drums, wheel cylinders, calipers, parking brake, etc. Check parking brake adjustment. You may need to have your brakes inspected more often if your driving habits or conditions result in frequent braking.
Part D: Recommended Fluids and Lubricants FLUIDLUBRICANT USAGE Hydraulic Brake Delco Supreme11 Brake Fluid (GM Part No. 12377967 or System equivalent DOT-3 Brake Fluid). @ NOTE: Fluids and lubricants identified below by name, part number or specification may be obtained from your dealer. USAGE FLUID/LUBRICANT Engine Oil Engine Oil with the American 1 Petroleum Institute Certified For Gasoline Engines “Starburst” symbol of the proper viscosity.
~ USAGE FLUIDLUBRICANT USAGE FLUIDLUBRICANT Floor Shift Linkage Lubriplate@Lubricant Aerosol (GM Part No. 12346293 or equivalent) or lubricant meeting requirements of NLGI # 2 Category LB or GC-LB. Lubriplate@Lubricant Aerosol (GM Part No. 12346293 or equivalent) or lubricant meeting requirements of NLGI # 2, Category LB or GC-LB. Chassis Lubrication Chassis Lubricant (GM Part No.
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on the following record pages. Also, you should retainall maintenance receipts. Your owner information portfolio is a convenient place to store them. .,. Maintenance Record - DATE ODOMETER READING BY ~ ~~ _.
1 I Maintenance Record ODOMETER DATE MAINTENANCE SERVICED BY READING PERFORMED r 7-40
tl Section 8 Customer Assistance Information Here you will find out how to contact Pontiac if you need assistance. This section also tells you how to obtain service publications andhow to report any safety defects.
Pontiac Cares r A r .c With PONTIAC CARES, you are never more than a phone call away from having your concern taken care of. 8-2 The PONTIAC CARES philosophy and elements are designed to make you realize that Pontiac recognizes you as a valuable customer, appreciatesyour purchase decision, andis dedicated to taking care of the most important person ...
What MakesUp Pontiac Cares? Customer Satisfaction Procedure A 3 year/36,000 mile (60 000 km) Bumper to Bumper Warranty CustomerAssistance RoadsideAssistance CourtesyTransportation All of these elements combine to make your driving experience an enjoyable one, and are discussed in greater detail further in your owner’s manual. Pontiac is focusing on the changing needs of our customers and is committed to giving you an exceptional level of customer care throughout your ownership experience.
Pontiac dealers have the facilities, trained technicians and up-to-date informationto promptly address any concerns you may have. However,if a concern has not been resolved to your complete satisfaction, take the following steps: STEP ONE -- Discuss your concern with a member of dealership management.Normally,concerns can be quickly resolved at that level. If the matter has already been reviewed with the sales, service or parts manager, contact the owner of the dealership or the general manager.
For prompt assistance, please have the following information available to give the Customer Assistance Representative: 0 Your name, address, home and business telephone numbers Vehicle Identification Number (This is available from the vehicle registration or title, or the plate at the top left ofthe instrument panel and visible through the windshield.
Pontiac Roadside Assistance Program A- Security While You Travel 1-800-ROADSIEE(1-800-762-3743) As the proud ownerof a new Pontiac vehicle, you are automatically enrolled inthe Pontiac Roadside Assistance program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road. Pontiac’s Roadside Assistance toll-free numberis staffed by a teamof technically trained advisors, who are available 24 hours a day, 365days a year.
We have quick, easy access to telephone numbers of the following additional services depending on your needs: Hotels Glassreplacement Tire repair facilities Rental vehicle or taxis Axports or train stations Police, fire department or hospitals In many instances, mechanical failures are covered under Pontiac’s comprehensive warranty. However, when other services are utilized, our advisors will explain any payment obligationsyou might incur.
Pontiac Courtesy Transportation I I I Pontiac strives to give you a worry-free ownership of' your vehicle, and we realize the inconvenience of being without a car. So Pontiac has comeup with a way to eliminate any frustrations you might have when trying to get a rideto work, or wondering how you will get home. Well, your worries are over. Pontiac provides no-cost transportation when you bring your 1998 Pontiac in for warranty service.
GM Participation in an Alternative Dispute ResolutionProgram This program is available in all 50 states and the District of Columbia. Canadian ownersrefer to yourWarranty and Owner Assistance Information booklet for information on theCanadian Motor Vehicle Arbitration Plan (CAMVAP). General Motors reserves the right to change eligibility limitations andor to discontinue its participation in this program.
We prefer you utilize the Customer Satisfaction REPORTING SAFETY DEFECTS Procedure before you resort to AUTO LINE, but you TO THE UNITED STATES may contact theBBB at any time.The BBB will attempt to resolve the complaint servingas an intermediary.
REPORTING SAFETY DEFECTS TO THE CANADIAN GOVERNMENT In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French). Or, write: General Motors of Canada Limited Customer Communication Centre,163-005 1908 ColonelSam Drive Oshawa, Ontario L1H 8P7 If you live in Canada, and you believe that your vehicle has a safety defect, you should immediately notify Transport Canada, in addition to notifying General Ordering Motors of Canada Limited.
1998 PONTIAC SERVICE PUBLICATIONS ORDERING INFORMATION The following publications covering the operation and servicing of your vehicle can be purchased by filling the Service Publication Order Form in this book and mailing it in with your check, money order, or credit card information to Helm, Incorporated (address below.
ORDER TOLL FREE (NOTE: For CreditCard Holders Onh) 1-800-7824356 (Monda -Friday 8:OOAM - 6:OO PM ESl FdOrders Only 1-313-865-5927 Orders will be mailed within 10,days of receipt. Please allow ade uate time for pos service. If further lnformatlon IS needed, write to the address s own below or call 1-800-782-4356.Material cannot be returned for credit without packing slip with information within30 days of delivery. On returns, a re-stocking fee may be applied against the original order.
b NOTES 8-14
Section 9 Index Accessory Inflator ............................. 2-54 Accessory Power Outlet .......................... 2-55 Adjustable Support Seat ........................... 1-3 1-18 AirBag ....................................... . . . . . . . . . . . . . . . . . . 1-22 How Does it Restrain . . . 1-20 How it Works ................................ 1-20 Location .................................... 1.20.2.63 Readiness Light ......................... 1-24 Servicing ...................................
Belt. Engine Accessory ..........................6-67 Better Business Bureau Mediation ................... 8-9 4-27 Blizzard. Driving In ............................. 2-74 Boost Gage .................................... Brake 6-3 1 Adjustment .................................. Fluid ....................................... 6-28 6-28 Master Cylinder .............................. Parking ..................................... 2-28 6-3 1 Pedal Travel .................................
Outside of Your Vehicle ................ Special Problems ............................. ... 6-52 6-50 Stains ...................................... 6-50 6-54 Tires ....................................... Vinyl ....................................... 6-50 Wheels ..................................... 6-54 Windshield and Wiper Blades ................... 6-52 3-2 Climate Control. Standard ......................... Climate Control System ........................... 3-2 Clock. Setting the ......................
Driving (Continued) On Grades While Towing a Trailer ............... 4-37 On Hill and Mountain Roads .................... 4-23 On Snow and Ice ............................. 4-26 ThrmrghWatm ............................... 4-19 WetRoads .................................. 4-17 Winter ...................................... 4-25 With a Trailer ................................ 4-35 4-3 DrunkenDriving ................................ Electrical Equipment. Adding ............... 3.28. 6.58 Electrical System ......
Fuel .......................................... Canada ...................................... DoorLock ................................... DoorRelease ................................. Filling a Portable Container ...................... Filling Your Tank .............................. Gage ....................................... In Foreign Countries ........................... Fuses and Circuit Breakers ....................... 6-3 6-4 6-6 6-8 6-9 6-6 2-73 6-5 6-59 Gages 2-74 Boost ........................
Inspections (Continued) Throttle System .............................. 7-35 CaliperKnuckle .............................. 7-36 Instrument Panel ............................... 2-56 Brightness Control ............................ 2-46 Cleaning .................................... 6-5 1 Cluster ........................... 2.58.2.59. 2.60 InteriorLamps ................................. 2-46 Jack,Tire .................................... Jumpstarting ...................................
Low Washer Fluid Light ......................... Lubricants and Fluids ............................ Lubrication Service. Body ........................ LumbarControls ................................ 2-72 7-37 7-32 1-3 Magnasteer ................................ 4. 10 Maintenance. Normal Replacement Parts ............ 6-66 7-39 MaintenanceRecord ............................ Maintenance Schedule ............................ 7- 1 Long Tripmghway Definition ...................
Personalization Features ......................... 2- 11 2- 11 Automatic Door Locks ......................... 2- 11 Delayed Locking ............................. Security Feedback ............................ 2- 12 8-2 Pontiac Cares Information ......................... Power AccessorvOutlet ............................. 2-55 AntennaMastCare ............................ 3-30 7-31 AntennaService .............................. 2-5 DoorLocks ................................... 6-58 OptionFuses ................
Reverse. Automatic Transaxle ..................... 2-25 1.18 Right Front Passenger Position .................... 8-6 Roadside Assistance .............................. Roadside Assistance. Canadian ..................... 8-7 5-38 Rocking Your Vehicle ........................... .............. ....... . . 6-43 Rotation. Tires safety BeltExtender . . . . . . . . . . . . . . . . . . . . . . . 1-49 1-5 SafetyBelts .................................... Adults ...................................... 1-10 6-51 Care .
Shoulder Belt Height Adjuster..................... 1-12 Sidemarker Lamp Bulb Replacement ............... 6-35 2-37 Signaling Turns ................................ Skidding ...................................... 4-14 3-28 Sound Equipment. Adding ........................ Spare Tire. Compact ............................. 5-37 Specifications and Capacities...................... 6-65 6-66 Specifications. Engine ........................... Speech Impaired. Customer Assistance ............... 8-5 Speedometer ....
TopStrap ................................... 1-39 TorqueLock ................................... 2-32 Torque, Wheel Nut ......................... 5-33, 6-65 Towing a Trailer ................................ 4-31 Towing Your Vehicle ............................. 5-8 Traction Control System Warning Light . . . . . . . . . . . . 2-66, 4-9 Off Warning Light ........................ 2-66, 4-9 Traction Control Svstem .......................... 4-9 Trailer 4-35 Brakes ...................................
Wheel 6-47 Alignment .................................. Nut Torque ............................. 5-33, 6-65 Replacement ................................. 6-47 Wrench ..................................... 5-27 Windows ..................................... 2-35 Express-Down ............................... 2-35 Power ...................................... 2-35 WindshieldWasher ............................. 2-39 Fluid ....................................... 6-27 Fluid Level Check ............................
rrUFORMATlON ON THE NEXT FEW PAGES IS COMMONLY REFERRED TO TOPICS QUICK1Y. FOR INFORMATION NOT INCLUDED HERE, Pi - USE THETA""CONTENTS OR THE INDEX IN THE MANUAI rm - gaf7e"' rearing a safety belt correctlyis one of the most important things you and your passengerscan do. This section contains very important information about safety belt usage, air bags and child restraints. ., . - * 3, '< .is'.' , . .,! .
Roadside Assistqp ,7* i.
Inck id in this sectionis a picture ot the overarr lnstrumenf panel pagr The locationof the controlsyou will use are noted here.
q%$ ;, Although-we hope you'll neverrun into trod F on the road, refer to thefollowing pages for help with some ofthe most common problemsthat may occur, * 0 . .
REPLi Park and TurnSianal Back-up and TurnSignal uadpramps
I CAPACITIES AND SPEl F WlONS Engine Toque ;67 m Thermostat Starlr
1 CAPACITIES AND SPECIFICATIONS (CONTINUEL) Automatic Transmission (4165EI Wheel Base Crankcase (Engine Oil with Filter Change) length t m I tr ne Cooling System ;,@ .. , , . Treaa wont 1es (153.4 cfl: Fuel Tank Rear Tread 1es (153.
/L ! W i n g System See Page 5-1 I r.