2010 Pontiac G6 Owner Manual In Brief ........................................................... 1-1 Instrument Panel ........................................ 1-2 Initial Drive Information ............................... 1-4 Vehicle Features ...................................... 1-14 Performance and Maintenance ................... 1-18 Seats and Restraint System ............................. 2-1 Head Restraints ......................................... 2-2 Front Seats .....................................
Windshield Wiper Blade Replacement ......... 6-55 Tires ...................................................... 6-56 Appearance Care ................................... 6-107 Vehicle Identification ............................... 6-114 Electrical System .................................... 6-115 Capacities and Specifications ................... 6-125 Maintenance Schedule ..................................... 7-1 Maintenance Schedule ................................ 7-2 Customer Assistance Information ......
Canadian Owners Propriétaires Canadiens A French language copy of this manual can be obtained from your dealer/retailer or from: On peut obtenir un exemplaire de ce guide en français auprès du concessionnaire ou à l’adresse suivante: GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, and the name G6 are registered trademarks of General Motors. Helm, Incorporated P.O.
Safety Warnings and Symbols A circle with a slash through it is a safety symbol which means “Do Not,” “Do not do this,” or “Do not let this happen.” Warning Messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Danger indicates a hazard with a high level of risk which will result in serious injury or death. Warning or Caution indicates a hazard that could result in injury or death.
Vehicle Symbol Chart .: Fuel Gage Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index.
✍ NOTES vi
Section 1 Instrument Panel ..............................................1-2 Initial Drive Information ....................................1-4 Remote Keyless Entry (RKE) System ................1-4 Remote Vehicle Start ......................................1-4 Door Locks ....................................................1-5 Trunk Release ...............................................1-5 Windows .......................................................1-6 Seat Adjustment .....................................
Instrument Panel 1-2
A. Outlet Adjustment on page 4-24. B. Turn Signal/Multifunction Lever on page 4-4. C. Driver Shift Control. See Automatic Transmission Operation on page 3-24 (If Equipped). D. Cruise Control on page 4-7 (If Equipped). Driver Information Center (DIC) Buttons. See Driver Information Center (DIC) on page 4-39. E. Instrument Panel Cluster on page 4-25. F. Audio Steering Wheel Controls on page 4-82 (If Equipped). G. Windshield Wipers on page 4-5 and Windshield Washer on page 4-6. H.
Initial Drive Information Press This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. Lock and unlock feedback can be personalized. For more detailed information, refer to each of the features which can be found later in this owner manual. Q to lock all doors. Press and hold open the trunk. V for approximately one second to L and release to locate the vehicle.
The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once. Canceling a Remote Start To cancel a remote start: • Aim the RKE transmitter at the vehicle and press and hold / until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on and then back to off. See Remote Vehicle Start on page 3-5. Door Locks Manual Locks Power Door Locks T : Press the top of the switch to lock both doors.
Windows Seat Adjustment Manual Seats On vehicles with power windows, the switches are on the driver door armrest. The passenger doors have switches that control only that window. Press the front of the switch to open the window. Pull the switch up to close it. For more information, see Power Windows on page 3-14. 1-6 1. Lift the bar under the seat to unlock the seat. 2. Slide the seat to the desired position and release the bar. Try to move the seat to be sure it is locked in place.
Power Seats (If Equipped) Power Reclining Seatbacks (If Equipped) Move the seat forward or rearward by moving the control forward or rearward. To raise or recline the seatback, tilt the top of the control forward or rearward. Raise or lower the front or rear of the seat by moving the front or rear of the control up or down. See Reclining Seatbacks on page 2-7. See Power Seats on page 2-5.
Power Lumbar Heated Seats (If Equipped) Press the front (A) or rear (B) of the control to increase or decrease lumbar support. On vehicle’s with heated front seats, press the top of the switch to turn the feature on to the high heat setting. The indicator light (2) will be lit. Press the top of the switch again to go to the low heat setting. The indicator light (1) will be lit. Press the bottom of the switch to turn the feature off. The heated seat feature will turn off when the ignition is turned off.
Safety Belt Sensing System for Passenger Airbag The passenger sensing system will turn off the right front passenger frontal airbag and seat-mounted side impact airbag under certain conditions. The driver airbags and roof-rail airbags are not affected by this. The passenger airbag status indicator will be visible on the instrument panel when the vehicle is started. Refer to the following sections for important information on how to use safety belts properly.
Mirror Adjustment Manually fold the mirrors inward to prevent damage when going through an automatic car wash. To fold, push the mirror toward the vehicle. Push the mirror outward, to return to its original position. Exterior Mirrors Controls for the outside power mirrors are located on the driver door. See Outside Power Mirrors on page 3-36. Interior Mirror Adjust the mirror to see clearly behind your vehicle. Hold the mirror in the center to move it up or down and side to side.
Steering Wheel Adjustment Interior Lighting Dome Lamps The dome lamps come on when any door is opened. They turn off after all the doors are closed. To turn the dome lamps on manually, turn the instrument panel brightness knob, located on the instrument panel to the left of the steering column, clockwise to the farthest position. The dome lamps will remain on whether a door is opened or closed. Reading Lamps The front reading lamps are located in the front overhead console.
Exterior Lighting Windshield Wiper/Washer P : Turn the band to this position to turn on the Automatic Headlamp System. In Canada, this position only works when a vehicle is in the P (Park) position. The windshield wiper lever is located on the right side of the steering column. AUTO: Automatically turns on the Daytime Running Lamps (DRL) during the daytime, and the headlamps, parking lamps, and taillamps at night. 9 : Turns the wipers off. & : Turn band for intermittent or speed sensitive operation.
Windshield Washer: Press the button at the end of the lever until the washers begin. See Windshield Wipers on page 4-5 and Windshield Washer on page 4-6. Automatic Climate Control System (If Equipped) Climate Controls Climate Control System A. B. C. D. A. Fan Control B. Air Recirculation C. Temperature Control D. Outside Air E. Air Delivery Mode Control F. Air Conditioning G. Rear Window Defogger Fan Control Air Conditioning Air Recirculation Outside Air E. F. G. H.
Vehicle Features Radio(s) © ¨: Seek or scan stations. 4 : Press to display additional text information related to the current FM-RDS or XM station, or CD, MP3, WMA song. Song title information will be displayed on the top line of the display while the artist information will be displayed on the bottom line, if the information is available during XM, CD, MP3, or WMA playback. For more information about these and other radio features, see Radio(s) on page 4-54.
Setting the Clock Satellite Radio To set the time and date for the Radio with CD (MP3) and USB port or the Radio with CD (MP3) player: XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces. XM satellite radio has a wide variety of programming and commercial-free music, coast-to-coast, and in digital-quality sound. 1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. O to turn the radio on. Press H and the HR, MIN, MM, DD, YYYY (hour, 2. Press 3.
Steering Wheel Controls Some audio controls can be adjusted at the steering wheel. b g: Press to silence the vehicle speakers only. Press again to turn the sound on. Press and hold longer than two seconds to interact with the OnStar® or Bluetooth systems. c: Press to reject an incoming call, or to end a call. For more information, see: • Audio Steering Wheel Controls on page 4-82. Bluetooth® e+/e w / x: −: Increases or decreases volume.
Cruise Control Power Outlets The cruise control buttons are located on the left side of the steering wheel. Accessory power outlets can be used to connect auxiliary electrical equipment, such as a cellular telephone. There are two accessory power outlets, located on the center console below the climate controls. If the vehicle has a Traction Control System (TCS), one accessory power outlet is in the center storage console and the other is on the center console below the climate controls.
Performance and Maintenance Traction Control System (TCS) The traction control system limits wheel spin. The system turns on automatically every time the vehicle is started. • To turn off traction control, press and release t. 4 illuminates and the appropriate DIC message is displayed. See DIC Warnings and Messages on page 4-42. • Press and release the button again to turn on traction control. For more information, see Traction Control System (TCS) on page 5-6.
Tire Pressure Monitor The Tire Pressure Monitor alerts you when a significant reduction in pressure occurs in one or more of the vehicle’s tires by illuminating the low tire pressure warning light on the instrument cluster. The warning light will remain on until the tire pressure is corrected. The proper tire pressures for your vehicle are listed on the Tire and Loading Information label located on the driver side center pillar (B pillar). See Loading the Vehicle on page 5-18.
Engine Oil Life System Fuel E85 (85% Ethanol) The engine oil life system calculates engine oil life based on vehicle use and displays a DIC message when it is necessary to change the engine oil and filter. The oil life system should be reset to 100% only following an oil change. The 8th digit of the Vehicle Identification Number (VIN) shows the code letter or number that identifies the vehicle’s engine. The VIN is at the top left of the instrument panel.
Driving for Better Fuel Economy Roadside Assistance Program Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. U.S.: 1-800-ROADSIDE (762-3743) • • • • Avoid fast starts and accelerate smoothly. Brake gradually and avoid abrupt stops. Avoid idling the engine for long periods of time. When road and weather conditions are appropriate, use cruise control, if equipped. • Always follow posted speed limits or drive more slowly when conditions require.
OnStar® How OnStar Service Works Q : This blue button connects you to a specially trained OnStar advisor to verify your account information and to answer questions. ] : Push this red emergency button to get priority help from specially trained OnStar emergency advisors. X : Push this button for hands-free, voice-activated ® OnStar uses several innovative technologies and live advisors to provide a wide range of safety, security, navigation, diagnostics, and calling services.
For a full description of OnStar services and system limitations, see the OnStar Owner’s Guide in the glove box. OnStar service is subject to the OnStar terms and conditions included in the OnStar Subscriber Information. OnStar service cannot work unless the vehicle is in a place where OnStar has an agreement with a wireless service provider for service in that area.
OnStar Steering Wheel Controls Your Responsibility This vehicle may have a Talk/Mute button that can be used to interact with OnStar hands-free calling. See Audio Steering Wheel Controls on page 4-82 for more information. Increase the volume of the radio if the OnStar advisor cannot be heard. On some vehicles, the mute button can be used to dial numbers into voice mail systems, or to dial phone extensions. See the OnStar Owner’s Guide for more information.
Section 2 Seats and Restraint System Head Restraints ...............................................2-2 Front Seats ......................................................2-4 Manual Seats ................................................2-4 Power Seats ..................................................2-5 Power Lumbar ...............................................2-5 Heated Seats .................................................2-6 Reclining Seatbacks ........................................
Head Restraints The vehicle’s front seats have adjustable head restraints in the outboard seating positions. { WARNING: With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head.
Push down on the head restraint after the button is released to make sure that it is locked in place. The head restraints are not designed to be removed. Pull the head restraint up to raise it. To lower the head restraint, press the button, located on the top of the seatback, and push the restraint down.
Front Seats Manual Seats { WARNING: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving. 2-4 If the vehicle has a manual seat, it can be moved forward or rearward. 1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar.
Power Seats Power Lumbar If the vehicle has power seats, the controls used to operate them are located on the outboard side of the seats. On seats with power lumbar, the control is located on the outboard side of the seat cushion. To adjust the seat: • Move the seat forward or rearward by sliding the Press the front of the control (A) to increase lumbar support. Press the rear of the control (B) to decrease lumbar support. control forward or rearward.
Heated Seats Press the top of the switch again to go to the low heat setting. The indicator light (1) will be lit. Press the bottom of the switch to turn the feature off. The heated seat feature will turn off when the ignition is turned off. On vehicle’s with heated front seats, press the top of the switch to turn the feature on to the high heat setting. The indicator light (2) will be lit.
Reclining Seatbacks Manual Reclining Seatbacks On seats with manual reclining seatbacks, the lever used to operate them is located on the outboard side of the seat. { WARNING: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.
To return the seatback to an upright position: Power Reclining Seatbacks 1. Lift the lever fully without applying pressure to the seatback and the seatback returns to the upright position. 2. Release the lever to lock the seatback. 3. Push and pull on the seatback to make sure it is locked. If the seats have power reclining seatbacks, the control used to recline them is located on the outboard side of the seat behind the power seat control.
{ WARNING: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries. The lap belt cannot do its job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries.
Seatback Latch { WARNING: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving. On vehicles with this feature, it provides easy access to the rear seats. To operate the seatback latch, pull up on the manual recline lever. The seatback will automatically spring forward.
Easy Entry Seat To use the easy entry seat: { WARNING: If the easy entry right front seat is not locked, it can move. In a sudden stop or crash, the person sitting there could be injured. After you have used it, be sure to push rearward on an easy entry seat to be sure it is locked. { WARNING: If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. 1.
Power Lift Seat 2. Pull back on the top of the recliner lever. The seatback will move forward. 3. Slide the seat forward. 4. Move the seat rearward until it locks into place after the passenger enters the rear seat area. 5. Move the seatback to its original position and return the front seat safety belt to the safety belt guide. Make sure both the seat and seatback are locked. 2-12 To adjust a power lift seat, press the top or bottom of the power lift seat switch to raise or lower the seat.
Rear Seats 60/40 Split Bench Seat (Sedan and Coupe) Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 2. Fold the seatback down from inside the vehicle. Folding the Seatback To fold down the rear seatback: { WARNING: If either seatback is not locked, it could move forward in a sudden stop or crash.
Safety Belts { WARNING: Safety Belts: They Are for Everyone A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. To return the seatback to the upright position, push up the seatback. Then pull on the seatback to make sure it is secure.
{ WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly. In most states and in all Canadian provinces, the law requires wearing safety belts.
Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels.
Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield...
or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.
Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. And you can unbuckle a safety belt, even if you are upside down.
How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children on page 2-36 or Infants and Young Children on page 2-39. Follow those rules for everyone’s protection. It is very important for all occupants to buckle up.
Q: What is wrong with this? { WARNING: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit snugly against your body. A: The shoulder belt is too loose. It will not give as much protection this way.
Q: What is wrong with this? { WARNING: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs. A: The lap belt is too loose. It will not give nearly as much protection this way.
Q: What is wrong with this? { WARNING: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. A: The belt is buckled in the wrong buckle.
Q: What is wrong with this? { WARNING: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests. A: The belt is over an armrest.
Q: What is wrong with this? { WARNING: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen. The shoulder belt should go over the shoulder and across the chest. A: The shoulder belt is worn under the arm.
Q: What is wrong with this? { WARNING: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest. A: The belt is behind the body.
Q: What is wrong with this? { WARNING: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it. A: The belt is twisted across the body.
Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index. 2. If the seat has a safety belt guide, and the safety belt is not routed through the guide, slide the edge of the belt webbing through the opening on the guide. Be sure the belt is not twisted. 2-28 3.
4. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 2-35. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary. 6. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants. 5.
To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Slide the latch plate up the safety belt webbing when the safety belt is not in use. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side wall. If the vehicle has a retractable hardtop, secure the safety belt latch plate when the safety belt is not in use in the rear seat.
Shoulder Belt Height Adjuster (Sedan Only) The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. Adjust the height so that the shoulder portion of the belt is centered on the shoulder. The belt should be away from the face and neck, but not falling off the shoulder. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. Push down the release button (A) and move the height adjuster to the desired position.
Rear Safety Belt Comfort Guides (Sedan and Coupe Only) Here is how to install a comfort guide to the safety belt: This vehicle may have rear shoulder belt comfort guides. If not, they are available through your dealer/retailer. The guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed and properly adjusted, the comfort guide positions the belt away from the neck and head. 1.
2. Place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top.
{ WARNING: A safety belt that is not properly worn may not provide the protection needed in a crash.The person wearing the belt could be seriouslyinjured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 4. Buckle, position, and release the safety belt as described previously in this section. Make sure that the shoulder belt crosses the shoulder.
Safety Belt Use During Pregnancy Safety Belt Extender Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer/retailer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Child Restraints Older Children Use a booster seat with a lap-shoulder belt until the child passes the below fit test: • Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat. • Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear safety belt comfort guide. See “Rear Safety Belt Comfort Guides” under Lap-Shoulder Belt on page 2-28 for more information.
Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. This applies belt force to the child’s pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash. { WARNING: Never do this.
{ WARNING: Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward increasing the chance of head and neck injury. The child might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries.
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle. { WARNING: { WARNING: Never do this. Never hold an infant or a child while riding in a vehicle.
{ WARNING: Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If you must secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go.
For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer’s instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.
Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (B) provides restraint for the child’s body with the harness. 2-42 A booster seat (C-D) is a child restraint designed to improve the fit of the vehicle’s safety belt system. A booster seat can also help a child to see out the window.
Securing an Add-On Child Restraint in the Vehicle { WARNING: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual. To help reduce the chance of injury, the child restraint must be secured in the vehicle.
Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that children and child restraints be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint; a child riding in a forward-facing child seat; an older child riding in a booster seat; and children, who are large enough, using safety belts. A label on your sun visor says, “Never put a rear-facing child seat in the front.
If you need to secure more than one child restraint in the rear seat, review the following illustrations. Depending on where you place the child restraint, you may not be able to access certain safety belt assemblies or LATCH anchors for additional passengers or child restraints. Configurations for Use of Child Restraints (Sedan Only) A. Child restraint using LATCH B. Child restraint or occupant using safety belt A. Occupant prohibited B. Child restraint using LATCH A. Child restraint using LATCH B.
Lower Anchors and Tethers for Children (LATCH) Lower Anchors The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Top Tether Anchor Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.
Lower Anchor and Top Tether Anchor Locations j (Lower Anchor): Seating positions with two lower anchors. i (Top Tether Anchor): Seating positions with top tether anchors. j (Lower Anchor): Seating positions with two lower anchors. Rear Seat — Retractable Hardtop Rear Seat — Sedan i (Top Tether Anchor): Seating positions with top tether anchors. To assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion.
Sedan Coupe Retractable hardtop models do not have top tether anchors to be used to secure a child restraint in any seating position. Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached. Accident statistics show that children are safer if they are restrained in the rear rather than the front seat.
Securing a Child Restraint Designed for the LATCH System { WARNING: If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Install a LATCH-type child restraint properly using the anchors, or use the vehicle’s safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual.
Notice: Do not let the LATCH attachments rub against the vehicle’s safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. Sedan Models If you need to secure more than one child restraint in the rear seat, see Where to Put the Restraint on page 2-44.
This system is designed to make installation of child restraints easier. When using lower anchors, do not use the vehicle’s safety belts. Instead, use the vehicle’s anchors and child restraint attachments to secure the restraints. Some restraints also use another vehicle anchor to secure a top tether. Sedan, Coupe and Retractable Hardtop Models 1. Attach and tighten the lower attachments to the lower anchors.
If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback. If the position you are using has a headrest or head restraint and you are using a single tether, route the tether under the headrest or head restraint and in between the headrest or head restraint posts.
Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle. If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 2-46 for how to install your child restraint using LATCH.
4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 6.
To remove the child restraint, unbuckle the vehicle’s safety belt and let it go back all the way. If the top tether is attached to a top tether anchor, disconnect it. If your seat has a safety belt guide, return the safety belt into the guide on the seatback by sliding the webbing through the opening on the guide. Securing a Child Restraint in the Right Front Seat Position The vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint.
If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) for how and where to install the child restraint using LATCH. If a child restraint is secured using a safety belt and it uses a top tether, see Lower Anchors and Tethers for Children (LATCH) for top tether anchor locations.
If the airbag is off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If a child restraint has been installed and on indicator is lit, see “If the On Indicator is Lit for a Child Restraint” under Passenger Sensing System on page 2-67 for more information. To remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position.
Airbag System The vehicle has the following airbags: • • • • A frontal airbag for the driver. A frontal airbag for the right front passenger. A seat-mounted side impact airbag for the driver. A seat-mounted side impact airbag for the right front passenger. The vehicle may also have the following airbags: • A roof-rail airbag for the driver and the passenger seated directly behind the driver.
{ WARNING: { WARNING: Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with airbags.
Where Are the Airbags? The right front passenger frontal airbag is in the instrument panel on the passenger side. The driver frontal airbag is in the middle of the steering wheel.
Driver Side shown, Passenger Side similar Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door. If the vehicle has roof-rail airbags for the driver, right front passenger, and second row outboard passengers, they are in the ceiling above the side windows.
When Should an Airbag Inflate? { WARNING: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering.
• If the vehicle hits a narrow object (like a pole), the airbags could inflate at a different crash speed than if the vehicle hits a wide object (like a wall). • If the vehicle goes into an object at an angle, the airbags could inflate at a different crash speed than if the vehicle goes straight into the object. Thresholds can also vary with specific vehicle design. Frontal airbags are not intended to inflate during vehicle rollovers, rear impacts, or in many side impacts.
What Makes an Airbag Inflate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and deploy. The inflator, the airbag, and related hardware are all part of the airbag module. Frontal airbag modules are located inside the steering wheel and instrument panel.
The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deflated airbags. Airbag inflation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle, nor does it prevent people from leaving the vehicle. { WARNING: When an airbag inflates, there may be dust in the air.
In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. • Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for the airbag system. If you do not get them, the airbag system will not be there to help protect you in another crash. A new system will include airbag modules and possibly other parts.
According to accident statistics, children are safer when properly secured in a rear seat in the correct child restraint for their weight and size. We recommend that children be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint; a child riding in a forward-facing child seat; an older child riding in a booster seat; and children, who are large enough, using safety belts. A label on the sun visor says, “Never put a rear-facing child seat in the front.
• The system determines that a small child is present in a booster seat. • A right front passenger takes his/her weight off of the seat for a period of time. • The right front passenger seat is occupied by a smaller person, such as a child who has outgrown child restraints. • Or, if there is a critical problem with the airbag system or the passenger sensing system.
4. Reinstall the child restraint following the directions provided by the child restraint manufacturer and refer to Securing a Child Restraint in the Right Front Seat Position on page 2-56. If the Off Indicator is Lit for an Adult-Size Occupant 5. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, turn the vehicle off.
If this happens, use the following steps to allow the system to detect that person and enable the right front passenger frontal airbag and seat-mounted side impact airbag: 1. Turn the vehicle off. 2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. 3. Place the seatback in the fully upright position. 4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended. 5.
Servicing Your Airbag-Equipped Vehicle Airbags affect how the vehicle should be serviced. There are parts of the airbag system in several places around the vehicle. Your dealer/retailer and the service manual have information about servicing the vehicle and the airbag system. To purchase a service manual, see Service Publications Ordering Information on page 8-15.
Any object, such as an aftermarket seat heater or a comfort enhancing pad or device, installed under or on top of the seat fabric, could also interfere with the operation of the passenger sensing system. This could either prevent proper deployment of the passenger airbag(s) or prevent the passenger sensing system from properly turning off the passenger airbag(s). See Passenger Sensing System on page 2-67. Q: Because I have a disability, I have to get my If you have any questions, call Customer Assistance.
Restraint System Check Airbags Checking the Restraint Systems The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light on page 4-28 for more information. Safety Belts Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly.
Replacing Restraint System Parts After a Crash { WARNING: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible. If the vehicle has the LATCH system and it was being used during a crash, you may need new LATCH system parts.
✍ NOTES 2-76
Section 3 Features and Controls Keys ...............................................................3-2 Remote Keyless Entry (RKE) System ................3-3 Remote Keyless Entry (RKE) System Operation ...................................................3-3 Remote Vehicle Start ......................................3-5 Doors and Locks .............................................3-8 Door Locks ....................................................3-8 Power Door Locks .........................................
Keys { WARNING: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window. Do not leave the keys in a vehicle with children. The key can be used for the ignition and all locks.
Remote Keyless Entry (RKE) System Remote Keyless Entry (RKE) System Operation See Radio Frequency Statement on page 8-18 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. The Remote Keyless Entry (RKE) transmitter functions work up to 60 m (195 feet) away from the vehicle. There are other conditions which can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 3-3.
Q (Lock): Press to lock all the doors. The interior lamps turn off after all of the doors are closed. If enabled through the Driver Information Center (DIC), the remote lock feedback can be programmed to have the horn chirp and/or the turn signals flash to confirm locking. See “LOCK HORN” and “LIGHT FLASH” under DIC Vehicle Personalization on page 4-47. Pressing Q may also arm the content theft-deterrent system. See Content Theft-Deterrent on page 3-16. K (Unlock): Press to unlock the driver door.
Battery Replacement 3. Insert the new battery, positive side facing up. Replace with a CR2032 or equivalent battery. Replace the battery if the KEY FOB BATT LOW message displays in the DIC. See “KEY FOB BATT LOW” under DIC Warnings and Messages on page 4-42. 4. Snap the transmitter back together. Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter.
The remote start feature needs to be reset after your vehicle’s engine is started two times using the transmitter’s remote start button. To reset the remote start feature, insert the vehicle’s key into the ignition switch and turn it to ON/RUN. See Ignition Positions on page 3-20 for information regarding the ignition positions on your vehicle. If your vehicle has the remote start feature, the RKE transmitter functions will have an increased range of operation.
The remote vehicle start feature will not operate if any of the follow occur: • The remote start system is disabled through the DIC. • • • • The vehicle’s key is in the ignition. The vehicle’s hood is open. The hazard warning flashers are on. The check engine light is on. See Malfunction Indicator Lamp on page 4-34. • The engine coolant temperature is too high. • The oil pressure is low.
Doors and Locks WARNING: Door Locks • Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. Locking your doors can help prevent this from happening. { WARNING: Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked.
Door Ajar Reminder A chime will sound and the DOOR AJAR message will display if one of the doors is not fully closed. This happens when the ignition is on and the shift lever is moved out of P (Park) or N (Neutral). See DIC Warnings and Messages on page 4-42. If a door is opened before the five seconds has ended, the doors will not lock until five seconds after all doors are closed.
Programmable Automatic Door Unlock Your vehicle was programmed at the factory to unlock when the shift lever is moved to P (Park). You can change the settings of the programmable automatic door unlock feature through the Driver Information Center (DIC). See DIC Vehicle Personalization on page 4-47. Rear Door Security Locks Rear door security locks prevent passengers from opening the rear doors from the inside. The rear door security locks are located on the inside edge of each rear door.
To cancel the rear door security lock: 1. Unlock the door and open it from the outside. 2. Insert the key into the security lock slot and turn it so the slot is in the vertical position. 3. Do the same for the other rear door. Lockout Protection If your vehicle has power door locks, it will have this feature. If you press the power door lock switch when the key is in the ignition and any door is open, all the doors will lock and the driver’s door will unlock.
Remote Trunk Release Emergency Trunk Release Handle Press this button located on the driver’s door near the map pocket to open the trunk. You can open the trunk when the gear selector is in P (Park). When the retractable hardtop is down and stowed in the trunk, the trunk open function will be disabled. When the ignition is on, the TRUNK NOT ALLOW message will be displayed on the DIC when attempting to open the trunk with the retractable hardtop stowed inside.
Windows { WARNING: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Power Windows { WARNING: Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closing window. Do not leave keys in a vehicle with children.
Window Indexing (Coupe and Retractable Hardtop) This feature automatically lowers the window a small amount when the door is opened. Then, when the door is closed, the window will automatically raise fully. If the vehicle loses power or the window freezes, this feature may not work. From outside the vehicle, close the door and push the window inward so that the glass goes under the molding.
Window Lockout (Sedan Only) Theft-Deterrent Systems o Vehicle theft is big business, especially in some cities. This vehicle has theft-deterrent features, however, they do not make it impossible to steal. (Window Lockout): This button prevents the rear passengers from using their window switches. The window lockout button is located near the driver’s power window switches. The driver can still operate all the windows and the front passenger can operate their own window with the lockout on.
The security light, located on the instrument panel cluster, comes on to indicate that arming has been initiated. Once the system is armed, the security light flashes once every three seconds. If the security light is flashing twice per second, this means that a door is open. If the system is armed and the key is used to unlock the vehicle, the alarm will be activated.
How to Detect a Tamper Condition You do not have to manually arm or disarm the system. If three chirps are heard when the unlock or lock button is pressed on the RKE transmitter, it means that the content theft security system alarm was previously triggered. The security light will come on if there is a problem with arming or disarming the theft-deterrent system.
It is possible for the PASS-Key® III+ decoder to “learn” the transponder value of a new or replacement key. Up to 10 additional keys may be programmed for the vehicle. The following procedure is for programming additional keys only. If all the currently programmed keys are lost or do not operate, you must see your dealer/retailer or a locksmith who can service PASS-Key® III+ to have keys made and programmed to the system. 4.
Starting and Operating Your Vehicle Ignition Positions The ignition switch has four different positions. New Vehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Do not drive at any one constant speed, fast or slow, for the first 500 miles (805 km). Do not make full-throttle starts. Do not exceed 5,000 engine rpm. Avoid downshifting to brake or slow the vehicle.
ACC (ACC/ACCESSORY): This position unlocks the transmission. It also lets you use things like the radio and windshield wipers while the engine is not running. To use ACC/ACCESSORY, turn the key clockwise to the first position. Use this position if your vehicle must be pushed or towed. See Recreational Vehicle Towing on page 5-23. R (ON/RUN): This position can be used to operate the electrical accessories and to display some instrument panel warning lights.
Starting Procedure 1. With your foot off the accelerator pedal, turn the ignition to START. When the engine starts, let go of the key. The idle speed will slow down as the engine warms. Do not race the engine immediately after starting it. Operate the engine and transmission gently to allow the oil to warm up and lubricate all moving parts. The vehicle has a Computer-Controlled Cranking System. This feature assists in starting the engine and protects components.
Engine Coolant Heater The engine coolant heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below 0°F (−18°C). Vehicle with an engine coolant heater should be plugged in at least four hours before starting. An internal thermostat in the plug-end of the cord may exist which will prevent engine coolant heater operation at temperatures above 0°F (−18°C). To Use the Engine Coolant Heater 1. Turn off the engine. 2.
Automatic Transmission Operation The vehicle will have one of these styles of shifter located in the center console between the seats. P (Park): This position locks the front wheels. It is the best position to use when starting the engine because the vehicle cannot move easily. { WARNING: It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. Do not leave the vehicle when the engine is running unless you have to.
button before shifting from P (Park) while the ignition key is in ON/RUN. If you cannot shift out of P (Park), ease pressure on the shift lever and push the shift lever all the way into P (Park) as you maintain brake application. Press the shift lever button and then move the shift lever into another gear. See Shifting Out of Park on page 3-31 later in this section. R (Reverse): Use this gear to back up. Notice: Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission.
Notice: If your vehicle seems to accelerate slowly or not shift gears when you go faster, and you continue to drive your vehicle that way, you could damage the transmission. Have your vehicle serviced right away. You can drive in L (Low) when you are driving less than 35 mph (56 km/h) and D (Drive) for higher speeds until then. 3 (Third): This position is also used for normal driving. However, it reduces vehicle speed more than D (Drive) without using the brakes.
The odometer display on the instrument panel cluster will change from vehicle mileage to the letter M, for manual shift mode, and a number indicating the requested gear range when moving the shift lever forward or rearward. See Speedometer and Odometer on page 4-26 for more information. While using the MSM feature the vehicle will have firmer shifting and sportier performance. You can use this for sport driving or when climbing hills to stay in gear longer or to downshift for more power or engine braking.
The odometer display on the instrument panel cluster will change from the vehicle’s mileage to the letter M for Manual Shift Mode, and a number indicating the requested gear range when moving the shift lever forward or rearward. See Speedometer and Odometer on page 4-26 for more information. While using the DSC feature the transmission will have firmer shifting and sportier performance.
Parking Brake To release the parking brake: 1. Hold the brake pedal down. 2. Pull the parking brake handle up until you can press the release button. 3. Hold the release button in as you move the brake handle all the way down. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.
Shifting Into Park (Automatic Transmission) { WARNING: It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when you are on fairly level ground, use the steps that follow. If you are pulling a trailer, see Towing a Trailer on page 5-27.
Torque Lock If you are parking on a hill and you do not shift the automatic transmission into P (Park) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of P (Park). This is called torque lock. To prevent torque lock, set the parking brake and then shift into P (Park) properly before you leave the driver seat. To find out how, see “Shifting Into Park” previously in the section.
Parking Over Things That Burn { WARNING: WARNING: (Continued) • The exhaust system leaks due to corrosion or damage. Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. modified, damaged or improperly repaired. • There are holes or openings in the vehicle body from damage or after-market modifications that are not completely sealed.
Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. { WARNING: Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation.
Mirrors Manual Rearview Mirror The vehicle may have a manual inside rearview mirror with the OnStar® system. Vehicles with OnStar have three additional control buttons located at the bottom of the mirror. See your dealer/retailer for more information on the OnStar system and how to subscribe to OnStar. Also, see the OnStar® owners guide for more information about the services OnStar provides. Adjust the mirror to see clearly behind your vehicle.
Compass Compass Operation To adjust for compass variance: 1. Find your current location and variance zone number on the zone map that follows. Press O or depending on the vehicle, press AUTO/OFF to turn the compass on or off. When the ignition and the compass feature are on, the compass displays the current compass direction after a few seconds.
Outside Power Mirrors Controls for the outside power mirrors are located on the driver door. Manually fold the mirrors inward to prevent damage when going through an automatic car wash. To fold, push the mirror toward the vehicle. Push the mirror outward, to return to its original position. Outside Convex Mirror { WARNING: To adjust the mirrors: 1. Move the selector switch located below the four-way control pad to the left or right to choose either the driver side or passenger side mirror. 2.
Storage Areas Glove Box Lift up on the glove box lever to open it. Cupholders There are two cupholders in the front center console of the vehicle and two in the rear of the center console. Pull down the door on the rear of the center console to use the rear seat cupholders. Center Console Storage The center console has a separate storage area. Pull up the release handle on the front of the cover to open the compartment. In the floor console is a power accessory outlet.
Notice: Forcing the sunshade forward of the sliding glass panel may cause damage and the sunroof may not operate properly. Always close the glass panel before closing the sunshade. Notice: If you lower the retractable hardtop in cold weather (32°F/0°C or lower), you may damage top components. Do not lower the retractable hardtop in cold weather. Do not leave the sunroof open for long periods of time.
{ WARNING: When the retractable hardtop is opened or closed, people can be injured by the parts that move: the hardtop and its mechanism, the trunk lid, and the side windows. Keep people away from these parts when you are lowering or raising the top. { WARNING: If the retractable hardtop is not completely opened or closed, the system will cause the retractable hardtop to slowly descend after 3 minutes. You or others could be injured.
After the hardtop has lowered completely, release the switch. If you continue to press the switch for about two seconds after the hardtop has completely lowered, the windows will automatically close. If pressure is released from the switch before the hardtop cycle is complete, the cycle will stop and the Driver Information Center (DIC) will display the TOP NOT SECURE message.
Raising the Retractable Hardtop 1. Park on a level surface, and shift the transmission into P (Park). The vehicle must be in P (Park), and the engine must be running, or the ignition turned to the ON/RUN position, to operate the retractable hardtop. { WARNING: When the retractable hardtop is opened or closed, people can be injured by the parts that move: the hardtop and its mechanism, the trunk lid, and the side windows. Keep people away from these parts when you are lowering or raising the top.
4. The hardtop switch is located on the headliner. To raise the hardtop, pull and hold the switch until the cycle is complete. 3-42 As the switch is being pulled the hardtop will raise from the trunk and move into place. The hardtop and trunk lid will close and latch. If the engine is on, a chime will sound when the hardtop has raised completely. The Driver Information Center (DIC) will display the TOP MOVE COMPLT message to signal the procedure is complete.
After the hardtop has raised completely, release the switch. If you continue to pull the switch for about two seconds after the hardtop has raised completely, the windows will automatically close. If the switch is released before the hardtop cycle is complete, the cycle stops and the Driver Information Center (DIC) displays the TOP NOT SECURE message.
✍ NOTES 3-44
Section 4 Instrument Panel Instrument Panel Overview ...............................4-3 Hazard Warning Flashers ................................4-3 Horn .............................................................4-3 Tilt and Telescopic Steering Wheel ...................4-3 Turn Signal/Multifunction Lever .........................4-4 Turn and Lane-Change Signals ........................4-4 Headlamp High/Low-Beam Changer ..................4-5 Flash-to-Pass .................................................
Section 4 Instrument Panel Tire Pressure Light .......................................4-33 Malfunction Indicator Lamp .............................4-34 Oil Pressure Light .........................................4-37 Security Light ...............................................4-37 Cruise Control Light ......................................4-38 Highbeam On Light .......................................4-38 Fuel Gage ...................................................4-38 Low Fuel Warning Light ...........
Instrument Panel Overview Hazard Warning Flashers | (Hazard Warning Flasher): Press this button located on the instrument panel, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press | again to turn the flashers off. Horn Press near or on the horn symbols on the steering wheel pad to sound the horn. Tilt and Telescopic Steering Wheel A tilt and telescope wheel lets the steering wheel be adjusted.
Turn Signal/Multifunction Lever Turn and Lane-Change Signals An arrow on the instrument panel cluster flashes in the direction of the turn or lane change. Move the lever all the way up or down to signal a turn. The lever on the left side of the steering column operates the following: G: Turn and Lane-Change Signals 5 3: O: Headlamp High/Low-Beam Changer Exterior Lamp Control Flash-to-Pass. Information for these features is on the pages following.
Headlamp High/Low-Beam Changer Windshield Wipers To change the headlamps from low beam to high beam, push the turn signal/multifunction lever away from you. This instrument panel cluster light 3 comes on if the high beam lamps are turned on while the ignition is in ON/RUN. To change the headlamps from high beam to low beam, pull the turn signal lever toward you. Flash-to-Pass This feature lets the high-beam headlamps be used to signal a driver in front of you that you want to pass.
x (Delay): Move the lever to the & position, then turn the x band up for more frequent wipes or down for less frequent wipes. 6 1 Press the button at the end of the windshield wiper lever until the washers begin. (Low Speed): Slow wipes. (High Speed): Fast wipes. 8 (Mist): Single wipe, move the lever down, then release it. Several wipes, hold the lever down. Clear ice and snow from the wiper blades before using them. If frozen to the windshield, carefully loosen or thaw them.
Cruise Control If your vehicle has cruise control, a speed of about 40 km/h) (25 mph) or more can be maintained without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below 40 km/h) (25 mph). { WARNING: Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads.
SET− (Set): Press this button to set a speed and to decrease the speed. To set a speed do the following: 1. Press the on/off symbol to turn cruise control on. The indicator light on the button comes on. 2. Get to the speed you want. 3. Press the SET− symbol and release it. The cruise symbol displays in the instrument panel cluster to show the system is engaged. 4. Take your foot off the accelerator pedal. Resuming a Set Speed Suppose the cruise control is set at a desired speed and the brakes are applied.
Reducing Speed While Using Cruise Control If the cruise control system is already engaged, • Push and hold the SET− symbol until the lower speed desired is reached, then release it. • To slow down in very small amounts, push the SET− symbol briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower. Passing Another Vehicle While Using Cruise Control Use the accelerator pedal to increase the vehicle speed.
Headlamps AUTO (Automatic Headlamp System): Automatically turns on the Daytime Running Lamps during daytime, and the headlamps, parking lamps, and taillamps at night. P (Off/On): Turn the band to this position to turn on the Automatic Headlamp System. In Canada, this position only works when a vehicle is in the P (Park) position. To turn on the Automatic Headlamp System, turn the switch to off/on. To turn them off, turn the switch to off/on again.
Headlamps Off in Park Daytime Running Lamps (DRL) This feature works when the ignition is in the ON/RUN position and it is dark outside. To turn the headlamps off when it is dark outside but keep other exterior lights on, turn the exterior lamp control to the parking lamp position. Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada.
Automatic Headlamp System When it is dark enough outside, the automatic headlamp system turns on the headlamps at the normal brightness along with other lamps such as the taillamps, sidemarker, parking lamps, and the instrument panel lights. The radio lights will also be dim. The vehicle has a light sensor on top of the instrument panel that controls the automatic headlamp system. Do not cover the sensor or the automatic headlamp system will turn on when it is not needed.
Instrument Panel Brightness The knob with this symbol is located on the instrument panel to the left of the steering column. Turn the knob clockwise or counterclockwise to brighten or dim the lights. Turn the knob completely clockwise to turn on the interior lamps. Courtesy Lamps If the vehicle has a retractable hardtop, it has courtesy lamps in the rear passenger area of the vehicle. These lamps make it easier to see while entering and exiting the vehicle.
Parade Dimming Parade mode automatically prohibits the dimming of the instrument panel displays during the daylight while the headlamps are on so that the displays are still able to be seen. Reading Lamps For vehicles with front and rear reading lamps, press the lens to turn the lamp on and off, while the doors are closed. These lamps come on automatically when any door is opened. Trunk Lamp The trunk lamp comes on when the trunk is opened and turns off when the trunk is closed.
Normally, these actions occur in steps or levels, without being noticeable. In rare cases at the highest levels of corrective action, this action may be noticeable to the driver. If so, a Driver Information Center (DIC) message might be displayed, such as BATTERY SAVER ACTIVE, BATTERY VOLTAGE LOW, or LOW BATTERY. If this message is displayed, it is recommended that the driver reduce the electrical loads as much as possible. See DIC Warnings and Messages on page 4-42.
Certain electrical accessories are not compatible with the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a problem, see your dealer/retailer for additional information on the accessory power outlet. Notice: Adding any electrical equipment to the vehicle can damage it or keep other components from working as they should. The repairs would not be covered by the vehicle warranty. Do not use equipment exceeding maximum amperage rating of 20 amperes.
9 (Fan Control): Turn the knob clockwise or counterclockwise to increase or decrease the fan speed. The fan must be on to run the air conditioning compressor. Temperature Control: Turn the knob clockwise or counterclockwise to increase or decrease the temperature inside the vehicle. When it is cold outside −18°C (0°F) or lower, use the engine coolant heater, if the vehicle has one, to quickly provide warmer air. An engine coolant heater warms coolant that the engine uses to warm the inside of the vehicle.
To help clear the windshield quickly, do the following: 1. Select the defrost mode. 2. Select the highest temperature. 3. Select the highest fan speed. : (Outside Air): Press the right side of the button to turn the outside air mode on. An indicator light comes on to show that it is on. Air from outside the vehicle circulates throughout the vehicle. The outside air mode can be used with all modes, except the recirculation mode. Press : again to cancel the recirculation mode.
Rear Window Defogger The rear window defogger uses a warming grid to remove fog or frost from the rear window. < REAR: Press to turn the rear window defogger on or off. An indicator light comes on to indicate that the rear window defogger is on. Be sure to clear as much snow as possible from the rear window. If driving below 80 km/h (50 mph), the rear window defogger turns off about 15 minutes after the button is pressed.
Automatic Climate Control System If the vehicle has this system, the heating, cooling, and ventilation can be automatically controlled in the vehicle. A. B. C. D. E. Fan Control Air Conditioning Recirculation Outside Air Rear Window Defogger F. Air Delivery Mode Control G. Display H. Temperature Control Automatic Operation AUTO (Automatic): Select AUTO on both the fan speed control and the air delivery mode control knobs to activate the automatic system.
Also be careful not to cover the sensor grille on the lower right side of the climate control faceplate. This senses the inside vehicle temperature needed for proper regulation. To avoid blowing cold air at start-up in cold weather, the system delays turning on the fan until warm air is available. The length of delay depends on the engine coolant temperature. Turning the fan knob overrides this delay and change the fan to a selected speed.
6 (Floor): Air is directed to the floor outlets with some air directed to the side window outlets and windshield. - (Defog): This mode clears the windows of fog or moisture. Air directed to the floor and windshield outlets. 0 (Defrost): This modes clears the windshield of fog or frost more quickly. The system automatically controls the fan speed if AUTO mode is selected.
# (Air Conditioning): Press to turn the air conditioning on or off. A light above the button comes on while the air conditioning is on. When air conditioning is selected or in AUTO mode, the system runs the air conditioning automatically to cool and dehumidify the air entering the vehicle. On hot days, open the windows long enough to let hot inside air escape. This reduces the time it takes for the vehicle to cool down. Then keep the windows closed for the air conditioner to work its best.
Outlet Adjustment Rotate the instrument panel outlets and move the louvers on the outlets to change the direction and amount of airflow inside the vehicle. Operation Tips • Clear away any ice, snow or leaves from the air inlets at the base of the windshield that can block the flow of air into the vehicle. • Use of non-GM approved hood deflectors can adversely affect the performance of the system.
Instrument Panel Cluster United States Uplevel Version Shown, Canada similar 4-25
Speedometer and Odometer Tachometer The speedometer shows the vehicle speed in both miles per hour (mph) and kilometers per hour (km/h). The tachometer shows the engine speed in revolutions per minute (rpm). The odometer shows how far the vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada).
Safety Belt Reminders Passenger Safety Belt Reminder Light Safety Belt Reminder Light Several seconds after the engine is started, a chime sounds for several seconds to remind the front passenger to buckle their safety belt. The passenger safety belt light, located on the instrument panel, comes on and stays on for several seconds and then flashes for several more.
Airbag Readiness Light The system checks the airbag’s electrical system for possible malfunctions. If the light stays on it indicates there is an electrical problem. The system check includes the airbag sensor, the pretensioners, the airbag modules, the wiring and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 2-59. The airbag readiness light flashes for a few seconds when the engine is started.
Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System on page 2-67 for important safety information. The instrument panel has a passenger airbag status indicator. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the right front passenger frontal airbag and seat-mounted side impact airbag are enabled (may inflate).
Charging System Light This light comes on briefly when the ignition key is turned to start, but the engine is not running, as a check to show it is working. Brake System Warning Light The vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking both parts need to be working. If the warning light comes on, there is a brake problem. Have the brake system inspected right away.
When the ignition is on, the brake system warning light also comes on when the parking brake is set. The light will stay on if the parking brake does not fully release. If it stays on after the parking brake is fully released, it means there is a brake problem. { WARNING: The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash.
Traction Off Light The light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/ESC button. This light also comes on along with a DIC message, if there is a problem with the traction control system. See Traction Control System (TCS) on page 5-6 for more information. See DIC for more information. Electronic Stability Control Indicator Light The Electronic Stability Control (ESC) Indicator light comes on while the system is controlling the vehicle.
Engine Coolant Temperature Warning Light Engine Coolant Temperature Gage This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by the dealer/retailer. If the system is working normally the indicator light goes off. Notice: Driving with the engine coolant temperature warning light on could cause the vehicle to overheat. See Engine Overheating on page 6-35. The vehicle’s engine could be damaged, and it might not be covered by the vehicle warranty.
When the Light is On Steady Malfunction Indicator Lamp This indicates that one or more of the tires is significantly underinflated. Check Engine Light A tire pressure message in the Driver Information Center (DIC), can accompany the light. See DIC Warnings and Messages on page 4-42 for more information. Stop and check the tires as soon as it is safe to do so. If a tire is underinflated, inflate to the proper pressure. See Tires on page 6-56 for more information.
Notice: If the vehicle is continually driven with this light on, after a while, the emission controls might not work as well, the vehicle’s fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
• If the vehicle has been driven through a deep puddle of water, the vehicle’s electrical system might be wet. The condition is usually corrected when the electrical system dries out. A few driving trips should turn the light off. • Make sure to fuel the vehicle with quality fuel.
Oil Pressure Light This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer/retailer. If the system is working normally the indicator light then goes off. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and it might have some other system problem. Security Light { WARNING: Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire.
Cruise Control Light Fuel Gage The cruise control light comes on whenever the cruise control is set. United States The light goes out when the cruise control is turned off. See Cruise Control on page 4-7 for more information. Highbeam On Light This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 4-5 for more information. 4-38 Canada The fuel gage shows how much fuel the vehicle has left, when the ignition is on.
Low Fuel Warning Light This light, on the fuel gage, comes on when the fuel tank is low on fuel. To turn it off, add fuel to the fuel tank. Driver Information Center (DIC) Your vehicle has a Driver Information Center (DIC). The DIC display gives you the status of many of your vehicle’s systems. The DIC is also used to display driver personalization menu modes and warning/status messages. All messages will appear in the DIC display, located at the bottom of the instrument panel cluster.
DIC Operation and Displays Trip Odometer The DIC comes on when the ignition is on. The DIC has different modes which can be accessed by pressing the DIC buttons. The button functions are detailed in the following. Information Modes Press the information button until the outside air temperature along with A or B displays. These modes show the current distance traveled since the last reset for each trip odometer in either kilometers (km) or miles (mi). Both odometers can be used at the same time.
MPG (L/100 KM) AVG (Average) OIL LIFE Press the information button until MPG (L/100 KM) AVG displays. This mode shows how many liters per 100 kilometers (L/100 km) or miles per gallon (mpg) your vehicle is getting based on current and past driving conditions. Press the information button until OIL LIFE displays. The engine oil life system shows an estimate of the oil’s remaining useful life. It shows 100% when the system is reset after an oil change.
DIC Warnings and Messages CHANGE OIL SOON These messages appear if there is a problem detected in one of your vehicle’s systems. This message displays when the life of the engine oil has expired and it should be changed. A message clears when the vehicle’s condition is no longer present. To acknowledge a message and clear it from the display, press and hold any of the DIC buttons. If the condition is still present, the warning message comes back on the next time the vehicle is turned off and back on.
CRUISE ENGAGED ESC (Electronic Stability Control) ACTIVE This message displays when the cruise control system is active. See Cruise Control on page 4-7 for more information. If your vehicle has Electronic Stability Control (ESC), this message displays and the ESC light on the instrument panel cluster comes on when ESC is assisting you with directional control of the vehicle. You may feel or hear the system working and see this message displayed in the DIC.
KEY FOB BATT (Battery) LOW LOW WASHER FLUID This message displays if the Remote Keyless Entry (RKE) transmitter battery is low. Replace the battery in the transmitter. See “Battery Replacement” under Remote Keyless Entry (RKE) System Operation on page 3-3. This message displays when the vehicle’s windshield washer fluid is low. Fill the windshield washer fluid reservoir to the proper level as soon as possible. See Windshield Washer Fluid on page 6-38.
SERVICE ESC (ELECTRONIC STABILITY CONTROL) If your vehicle has Electronic Stability Control (ESC), this message displays and a chime sounds if there has been a problem detected with ESC. The ESC light also appears on the instrument panel cluster. When this message displays, the system is not working. Adjust your driving accordingly. See Electronic Stability Control (ESC) on page 5-5 and Electronic Stability Control Indicator Light on page 4-32 for more information.
TIRE LOW ADD AIR TOP NOT ALLOWED On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle’s tires is low on air. The low tire pressure warning light also comes on. See Tire Pressure Light on page 4-33. If this message appears on the DIC, stop as soon as you can. Have the tire pressures checked and set to those shown on the Tire Loading Information label.
TOP TOO COLD TRUNK NOT ALLOW If your vehicle has a retractable hardtop, this message displays when the retractable hardtop button is pressed and the hardtop pump motor temperature is too cold. Wait for the hardtop pump motor to warm up before using the retractable hardtop. See Lowering the Retractable Hardtop on page 3-38 and Raising the Retractable Hardtop on page 3-41 for more information.
To change feature settings, use the following procedure: UNITS Entering Personalization Menu This feature allows you to select the units of measurement in which the DIC will display the vehicle information. When UNITS appears on the display, press and hold the reset button for at least one second to scroll through the available settings: 1. Turn the ignition on while the vehicle is stopped. To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2.
REMOTE START If your vehicle has remote start, this feature allows remote start to be turned off or on. Remote start allows you to start the engine from outside of the vehicle using your Remote Keyless Entry (RKE) transmitter. When REMOTE START appears on the display, press and hold the reset button for at least one second to scroll through the available settings: OFF: The remote start feature will be disabled. ON (default): The remote start feature will be enabled.
LIGHT FLASH DELAY LOCK This feature, which allows the vehicle’s exterior hazard/turn signal lighting to flash every time the lock, unlock, or trunk release buttons on the Remote Keyless Entry (RKE) transmitter are pressed, can be enabled or disabled. When LIGHT FLASH appears on the display, press and hold the reset button for at least one second to scroll through the available settings: This feature, which delays the actual locking of the vehicle, can be enabled or disabled.
AUTO UNLK (Unlock) UNLK (Unlock) This feature, which allows the vehicle to automatically unlock certain doors, can be enabled or disabled. When AUTO UNLK appears on the display, press and hold the reset button for at least one second to scroll through the available settings: This screen displays only if DRIVER or ALL is selected for the AUTO UNLK feature. This feature determines when the automatic door unlocking will occur.
EXT (Exterior) LIGHTS LANGUAGE This feature, which allows the vehicle’s exterior perimeter lighting to turn on each time the unlock button on the Remote Keyless Entry (RKE) transmitter is pressed, can be enabled or disabled. When EXT LIGHTS appears on the display, press and hold the reset button for at least one second to scroll through the available settings: This feature allows you to select the language in which the DIC will display.
Audio System(s) Notice: Contact your dealer/retailer before adding any equipment. Determine which radio the vehicle has and read the following pages to become familiar with its features. Adding audio or communication equipment could interfere with the operation of the vehicle’s engine, radio, or other systems, and could damage them. Follow federal rules covering mobile radio and telephone equipment.
4. To increase the time or date do one of the following: Radio(s) • Press the softkey located below the selected tab. • Press ¨ SEEK, or \ FWD. • Turn f clockwise. 5. To decrease the time or date do one of the following: • Press © SEEK or s REV. • Turn f counterclockwise. The date does not automatically display. To see the date press H while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
Radio Data System (RDS) The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only works when the information is available. While the radio is tuned to an FM-RDS station, the station name or call letters display. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly.
• To scan preset stations in the selected band, press and hold © SEEK for four seconds until a double beep sounds. The radio goes to a stored preset, plays for a few seconds, then goes to the next stored preset. Press © SEEK again to stop scanning preset stations. ¨ SEEK: Press to seek or scan stations with a strong signal in the selected band. • To seek stations, press and release ¨ SEEK to go to the next station and stay there.
To store a station as a favorite: 1. Tune to the desired radio station and set the balance/fade and tone settings to the desired levels. 2. Press FAV to display the page where to store the station. 3. Press and hold one of the six softkeys until a beep sounds. 4. Repeat the steps for each radio station to be stored as a favorite. To setup the number of favorites pages: 1. Press MENU to display the radio setup menu. 2. Press the softkey located below the FAV 1-6 tab. 3.
The radio may be capable of adjusting bass, midrange, or treble to the middle position by pressing the softkey below the BASS, MID, or TREB tab for more than two seconds. The radio beeps once and the level adjusts to the middle position. The radio may also be capable of adjusting all tone and speaker controls to the middle position by pressing f for more than two seconds until the radio beeps once. If a station’s frequency is weak, or has static, decrease the treble.
4. To go to the previous or to the next XM station within the selected category, do one of the following: • Turn f . • Press the softkeys below the right or left arrows on the radio display. • Press © SEEK or ¨ SEEK. 5. To exit the category search mode, press the FAV button or BAND button to display the favorites again. Undesired XM categories can be removed through the setup menu. To remove an undesired category: 1. Press MENU to display the radio setup menu. 2. Press the softkey below the XM CAT tab. 3.
Loading a CD Insert a CD partway into the slot, label side up. The player pulls it in and the CD begins playing. When the CD is inserted, the CD symbol displays. As each new track starts to play, the track number displays. The CD player can play the smaller 8 cm (3 in) single CDs with an adapter ring. Full-size CDs and the smaller CDs are loaded in the same manner. Ejecting a CD Z EJECT: Press to eject the CD. If the CD is not removed, after several seconds, the CD automatically pulls back into the player.
CD/AUX (CD/Auxiliary): Press to play a CD while listening to the radio. The CD icon and a message showing the track number displays when a CD is in the player. Press this button again and the system automatically searches for an auxiliary input device, such as a portable audio player. If a portable audio player is not connected, No Aux Input Device Found may display. Playing an MP3 CD-R or CD-RW Disc The radio may have the MP3 CD-R or CD-RW disc capability feature.
Care of the CD Player Do not add labels to a CD, it could get caught in the CD player. Use a marking pen to write on the top of the CD if a description is needed. Do not use CD lens cleaners, they could damage the CD player. Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged.
Using the USB Port Radio’s with a USB port can control a USB storage device or an iPod® using the radio buttons and knobs. See Using an MP3 on page 4-63 for information about how to connect and control a USB storage device or an iPod. Make sure the iPod has the latest firmware from Apple® for proper operation. iPod firmware can be updated using the latest iTunes® application. See www.apple.com/itunes. For help with identifying your iPod, go to www.apple.com/support.
CD-R or CD-RW Supported File and Folder Structure The radio supports: • • • • • • Up to 50 folders. Up to 8 folders in depth. Up to 50 playlists. The root directory is treated as a folder. Files are stored in the root directory when the disc or storage device does not contain folders. Files accessed from the root directory of a CD display as F1 ROOT. Empty Folder Up to 255 files. Folders that do not contain files are skipped, and the player advances to the next folder that contains files.
File System and Naming Playing a CD-R or CD-RW MP3 The song name that displays is the song name that is contained in the ID3 tag. If the song name is not present in the ID3 tag, then the radio displays the file name without the extension (such as .mp3) as the track name. f (Tune): Turn to select MP3 files on the CD currently playing. Track names longer than 32 characters or four pages are shortened.
S c (Previous Folder): Press the softkey below S c to go to the first track in the previous folder. c T (Next Folder): Press the softkey below go to the first track in the next folder. c T to RDM (Random): MP3 files can be listened to on a CD in random, rather than sequential order. To use random, press the softkey under the RDM tab until Random Current Disc displays to play songs from the current CD in random order. Press the same softkey again to turn off random play.
Connecting a USB Storage Device or iPod® Using the Radio to Control a USB Storage Device or iPod The USB Port can be used to control an iPod or a USB storage device. The radio can control a USB storage device or an iPod using the radio buttons and knobs and display song information on the radio’s display. To connect a USB storage device, connect the device to the USB port located on the front of the radio.
Using Softkeys to Control a USB Storage Device or iPod c (Folder View): Press the softkey below c to view the contents of the current folder on the USB drive. To browse and select files: The five softkeys below the radio display are used to control the functions listed below. 1. Press the softkey below To use the softkeys: 2. Turn 1. Press the first or fifth softkey below the radio display to display the functions listed below, or press the softkey below the function if it is currently displayed. 2.
h (Music Navigator): Press the softkey below h to view and select a file on an iPod, using the iPod’s menu system. Files are sorted by: • • • • • • Playlists • Third softkey, 5% through the list each time the Albums softkey is pressed. Genres • Fourth softkey, 10% through the list each time the softkey is pressed. Songs • Fifth softkey, end of the list. Composers 1. Press the softkey below Repeat Functionality h. f to scroll through the list of menus. Press f to select the desired menu.
Shuffle Functionality XM Radio Messages To use Shuffle: Press the softkey below > , 2 , < or = to select between Shuffle Off, Shuffle All Songs/Shuffle Songs, Shuffle Album, or Shuffle Folder. XL (Explicit Language Channels): These channels, or any others, can be blocked at a customer’s request, by calling 1-800-852-XMXM (9696). > XM Updating: The encryption code in the receiver is being updated, and no action is required. This process should take no longer than 30 seconds.
Channel Unavail: This previously assigned channel is no longer assigned. Tune to another station. If this station was one of the presets, choose another station for that preset button. XM Radio ID: If tuned to channel 0, this message alternates with the XM™ Radio 8 digit radio ID label. This label is needed to activate the service. No Artist Info: No artist information is available at this time on this channel. The system is working properly.
Voice Recognition Bluetooth Controls The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags. Use the buttons located on the steering wheel to operate the in-vehicle Bluetooth system. See Audio Steering Wheel Controls on page 4-82 for more information. Noise: Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise.
Pairing Information: • Up to five cell phones can be paired to the in-vehicle Bluetooth system. • The pairing process is disabled when the vehicle is moving. • The in-vehicle Bluetooth system automatically links with the first available paired cell phone in the order the phone was paired. • Only one paired cell phone can be connected to the in-vehicle Bluetooth system at a time.
Deleting a Paired Phone 1. Press and hold b g for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Bluetooth”. The system responds with “Bluetooth ready” followed by a tone. 3. Say “Delete”. The system asks which phone to delete followed by a tone. 4. Say the name of the phone to be deleted. If the phone name is unknown, use the “List” command for a list of all paired phones. The system responds with “Would you like to delete ? Yes or No” followed by a tone. 5.
4. After the system stores the phone number, it responds with “Please say the name tag” followed by a tone. 5. Say a name tag for the phone number. The name tag is recorded and the system responds with “About to store . Does that sound OK?”. • If the name tag does not sound correct, say “No” and repeat Step 5. • If the name tag sounds correct, say “Yes” and the name tag is stored. After the number is stored the system returns to the main menu.
Using the Directory Command The directory command lists all of the name tags stored by the system. To use the directory command: 1. Press and hold b g for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Directory”. The system responds with “Directory” and then plays back all of the stored name tags. When the list is complete, the system returns to the main menu. 3. Say the name tag to be deleted.
Making a Call Calls can be made using the following commands: • • • • Dial Digit Dial Call Re-dial Using the Dial Command 1. Press and hold b g for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Dial”. The system responds with “Dial using . Number please” followed by a tone. 3. Say the entire number without pausing. • If the system recognizes the number, it responds with “OK, Dialing” and dials the number.
3. Say the name tag of the person to call. • If the system clearly recognizes the name tag it responds with “OK, calling, ” and dials the number. • If the system is unsure it recognizes the right name tag, it confirms the name tag followed by a tone. If the name tag is correct, say “Yes”. The system responds with “OK, calling, ” and dials the number. If the name tag is not correct, say “No”. The system will ask for the name tag to be re-entered.
To Mute a call Three-Way Calling Three-Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press b g . The system responds with “Ready” followed by a tone. 2. Say “Three-way call”. The system responds with “Three-way call, please say dial or call”. 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press the callers together.
To Transfer Audio to the In-Vehicle Bluetooth System Dual Tone Multi-Frequency (DTMF) Tones The cellular phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the key is turned to the ON/RUN or ACC/ACCESSORY position. The in-vehicle Bluetooth system can send numbers and numbers stored as name tags during a call. This is used when calling a menu driven phone system.
Sending a Stored Name Tag During a Call 1. Press b g . The system responds with “Ready” followed by a tone. 2. Say “Send name tag.” The system responds with “Say a name tag to send tones” followed by a tone. 3. Say the name tag to send. • If the system clearly recognizes the name tag it responds with “OK, Sending ” and the dial tones are sent and the call continues.
Audio Steering Wheel Controls Vehicles with audio steering wheel controls could differ depending on the vehicle’s options. Some audio controls can be adjusted at the steering wheel. To select tracks on a CD: Press and release track. w or x to go to the next or previous To select tracks on an iPod or USB device: 1. Press and hold w or x while listening to a song until the contents of the current folder display on the radio display. 2.
c (End): Press to reject an incoming call, or end a current call. b g (Mute / Voice Recognition): Press to silence the vehicle speakers only. Press again to turn the sound on. For vehicles with Bluetooth® or OnStar® systems press and hold b g for longer than two seconds to interact with those systems. See Bluetooth® on page 4-71 and the OnStar Owner’s Guide for more information.
Fixed Mast Antenna (Retractable Hardtop) The fixed mast antenna can withstand most car washes without being damaged as long as it is securely attached to the base. If the mast becomes slightly bent, straighten it out by hand. If the mast is badly bent, replace it. Occasionally check to make sure the antenna is tightened to its base. If tightening is required, tighten by hand. Backglass Antenna (Coupe and Sedan) The AM-FM antenna is integrated with the rear window defogger, located in the rear window.
Section 5 Driving Your Vehicle Your Driving, the Road, and the Vehicle ............5-2 Defensive Driving ...........................................5-2 Drunk Driving .................................................5-2 Control of a Vehicle ........................................5-3 Braking .........................................................5-3 Antilock Brake System (ABS) ...........................5-4 Braking in Emergencies ...................................5-5 Electronic Stability Control (ESC) .
Your Driving, the Road, and the Vehicle Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear your safety belt — See Safety Belts: They Are for Everyone on page 2-14. { WARNING: Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready. In addition: • Allow enough following distance between you and the driver in front of you.
For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological, and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive. Medical research shows that alcohol in a person’s system can make crash injuries worse, especially injuries to the brain, spinal cord, or heart.
This is a mistake. The brakes might not have time to cool between hard stops. The brakes will wear out much faster with a lot of heavy braking. Keeping pace with the traffic and allowing realistic following distances eliminates a lot of unnecessary braking. That means better braking and longer brake life. If the engine ever stops while the vehicle is being driven, brake normally but do not pump the brakes. If the brakes are pumped, the pedal could get harder to push down.
ABS can change the brake pressure to each wheel, as required, faster than any driver could. This can help the driver steer around the obstacle while braking hard. Electronic Stability Control (ESC) As the brakes are applied, the computer keeps receiving updates on wheel speed and controls braking pressure accordingly.
This light comes on if there is a problem with the system or the system has been turned off. StabiliTrak comes on automatically whenever the vehicle is started. To help assist with directional control of the vehicle, the system should always be left on. The Traction Control System (TCS) and StabiliTrak can be turned off if needed by pressing and holding the TCS/ESC button until the StabiliTrak/TCS Off light comes on. Press the button again to turn StabiliTrak and Traction Control back on.
The traction off light is located on the instrument panel cluster. This light comes on if there is a problem with the system or if the system has been turned off. When this warning light is on, the system will not limit wheel spin. Adjust your driving accordingly. TCS automatically comes on whenever the vehicle is started. To limit wheel spin, especially in slippery road conditions, always leave the system turned on. TCS can be turned off if needed.
Steering Steering Tips Electric Power Steering It is important to take curves at a reasonable speed. If the vehicle has the electric power steering system and the engine stalls while driving, the power steering assist system will continue to operate until you are able to stop the vehicle. If power steering assist is lost because the electric power steering system is not functioning, the vehicle can be steered but it will take more effort.
See Braking on page 5-3. It is better to remove as much speed as possible from a collision. Then steer around the problem, to the left or right depending on the space available. An emergency like this requires close attention and a quick decision. If holding the steering wheel at the recommended 9 and 3 o’clock positions, it can be turned a full 180 degrees very quickly without removing either hand.
Passing Skidding Passing another vehicle on a two-lane road can be dangerous. To reduce the risk of danger while passing: In a skid, a driver can lose control of the vehicle. Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible. • Look down the road, to the sides, and to crossroads for situations that might affect a successful pass. If in doubt, wait.
While driving on a surface with reduced traction, try your best to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide. You may not realize the surface is slippery until the vehicle is skidding. Learn to recognize warning clues — such as enough water, ice, or packed snow on the road to make a mirrored surface — and slow down when you have any doubt.
No one can see as well at night as in the daytime. But, as we get older, these differences increase. A 50-year-old driver might need at least twice as much light to see the same thing at night as a 20-year-old. Driving in Rain and on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep-standing or flowing water.
Other Rainy Weather Tips Besides slowing down, other wet weather driving tips include: • • • • • Allow extra following distance. Pass with caution. Keep windshield wiping equipment in good shape. Keep the windshield washer fluid reservoir filled. Have good tires with proper tread depth. See Tires on page 6-56. • Turn off cruise control. Before Leaving on a Long Trip To prepare your vehicle for a long trip, consider having it serviced by your dealer/retailer before departing.
Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: • Keep the vehicle serviced and in good shape. • Check all fluid levels and brakes, tires, cooling system, and transmission. • Going down steep or long hills, shift to a lower gear. { WARNING: If you do not shift down, the brakes could get so hot that they would not work well.
Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 32°F (0°C) when freezing rain begins to fall, resulting in even less traction. Avoid driving on wet ice or in freezing rain until roads can be treated with salt or sand. Drive with caution, whatever the condition. Accelerate gently so traction is not lost.
Blizzard Conditions Being stuck in snow can be in a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Assistance Program on page 8-7. To get help and keep everyone in the vehicle safe: • Turn on the Hazard Warning Flashers on page 4-3. • Tie a red cloth to an outside mirror. { WARNING: Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled.
Run the engine for short periods only as needed to keep warm, but be careful. To save fuel, run the engine for only short periods as needed to warm the vehicle and then shut the engine off and close the window most of the way to save heat. Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps.
Rocking Your Vehicle to Get It Out Loading the Vehicle Turn the steering wheel left and right to clear the area around the front wheels. Turn off any traction or stability system. Shift back and forth between R (Reverse) and a forward gear, spinning the wheels as little as possible. To prevent transmission wear, wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while shifting, and press lightly on the accelerator pedal when the transmission is in gear.
Tire and Loading Information Label The Tire and Loading Information label also lists the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation, see Tires on page 6-56 and Inflation - Tire Pressure on page 6-64. There is also important loading information on the Certification label.
4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 − 750 (5 x 150) = 650 lbs). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6.
Example 2 Item A B C Description Maximum Vehicle Capacity Weight for Example 2 = Subtract Occupant Weight 68 kg (150 lbs) × 5 = Available Cargo Weight = Example 3 Total Item 453 kg (1,000 lbs) A 340 kg (750 lbs) B 113 kg (250 lbs) C Description Maximum Vehicle Capacity Weight for Example 3 = Subtract Occupant Weight 91 kg (200 lbs) × 5 = Available Cargo Weight = Total 453 kg (1,000 lbs) 453 kg (1,000 lbs) 0 kg (0 lbs) 5-21
Refer to the vehicle’s Tire and Loading Information label for specific information about your vehicle’s maximum vehicle capacity weight and seating positions. The combined weight of the driver, passengers, and cargo should never exceed the vehicle’s maximum vehicle capacity weight. Certification Label The label shows the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR).
If things like suitcases, tools, packages, or anything else are put inside the vehicle, they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going. { WARNING: Things you put inside the vehicle can strike and injure people in a sudden stop or turn, or in a crash. • Put things in the cargo area of the vehicle. In the cargo area, put them as far forward as you can. Try to spread the weight evenly.
Here are some important things to consider before recreational vehicle towing: • What’s the towing capacity of the towing vehicle? Be sure to read the tow vehicle manufacturer’s recommendations. When dinghy towing the vehicle, the vehicle should be run at the beginning of each day and at each RV fuel stop for about five minutes. This will ensure proper lubrication of transmission components. • How far will the vehicle be towed? Some vehicles have restrictions on how far and how long they can tow.
3. Set the parking brake. Dinghy Towing From the Rear 4. To prevent the battery from draining while the vehicle is being towed, remove the following fuse from the instrument panel fuse block: (IGN SENSOR). See Instrument Panel Fuse Block on page 6-116 for more information. 5. Turn the ignition to ACC/ACCESSORY. 6. Shift the transmission to N (Neutral). 7. Release the parking brake. Remember to reinstall the IGN SENSOR fuse once the destination has been reached.
Dolly Towing From the Front 5. Remove the key from the ignition. Tow the vehicle with the two rear wheels on the ground and the front wheels on a dolly: 6. Secure the vehicle to the dolly. 7. Release the parking brake. Dolly Towing From the Rear To tow the vehicle with two wheels on the ground and a dolly: 1. Put the front wheels on a dolly. 2. Put the gear shift lever in P (Park). 3. Set the parking brake. 4.
Towing a Trailer { WARNING: The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not work well — or even at all. The driver and passengers could be seriously injured. The vehicle may also be damaged; the resulting repairs would not be covered by the vehicle warranty. Pull a trailer only if all the steps in this section have been followed.
Pulling A Trailer Here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure the rig will be legal, not only where you live but also where you will be driving. A good source for this information can be state or provincial police. • Do not tow a trailer at all during the first 1,000 miles (1600 km) the new vehicle is driven. The engine, transmission or other parts could be damaged.
Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total gross weight of the vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle. If there are a lot of options, equipment, passengers or cargo in the vehicle, it will reduce the tongue weight the vehicle can carry, which will also reduce the trailer weight the vehicle can tow.
Total Weight on the Vehicle’s Tires Safety Chains Be sure the vehicle’s tires are inflated to the upper limit for cold tires. These numbers can be found on the Certification/Tire label. See Loading the Vehicle on page 5-18. Make sure not to go over the GVW limit for the vehicle, including the weight of the trailer tongue. Always attach chains between the vehicle and the trailer.
Driving with a Trailer Passing Towing a trailer requires a certain amount of experience. Get to know the rig before setting out for the open road. Get acquainted with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now longer and not as responsive as the vehicle is by itself. More passing distance is needed when towing a trailer.
Turn Signals When Towing a Trailer The arrows on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes or stopping. When towing a trailer, the arrows on the instrument panel flash for turns even if the bulbs on the trailer are burned out. For this reason you may think other drivers are seeing the signal when they are not.
If parking the rig on a hill: 1. Press the brake pedal, but do not shift into P (Park) yet. Turn the wheels into the curb if facing downhill or into traffic if facing uphill. 2. Have someone place chocks under the trailer wheels. 3. When the wheel chocks are in place, release the brake pedal until the chocks absorb the load. 4. Reapply the brake pedal. Then apply the parking brake and shift the transmission into P (Park). 5. Release the brake pedal. Leaving After Parking on a Hill 1.
✍ NOTES 5-34
Section 6 Service and Appearance Care Service ............................................................6-4 Accessories and Modifications ..........................6-4 California Proposition 65 Warning .....................6-5 California Perchlorate Materials Requirements .....6-5 Doing Your Own Service Work .........................6-5 Adding Equipment to the Outside of the Vehicle ......................................................6-6 Fuel ...........................................................
Section 6 Service and Appearance Care Center High-Mounted Stoplamp (CHMSL) (Retractable Hardtop and Coupe) ..............................................6-50 Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps (Sedan) ........................6-50 Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps (Coupe) ........................6-51 Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps (Retractable Hardtop) ......6-53 License Plate Lamp ..................................
Section 6 Service and Appearance Care Cleaning Exterior Lamps/Lenses ....................6-111 Finish Care ................................................6-111 Windshield and Wiper Blades .......................6-112 Aluminum Wheels .......................................6-112 Tires .........................................................6-113 Sheet Metal Damage ...................................6-113 Finish Damage ...........................................6-113 Underbody Maintenance .................
Service Accessories and Modifications For service and parts needs, visit your dealer/retailer. You will receive genuine GM parts and GM-trained and supported service people. When non-dealer/non-retailer accessories are added to the vehicle, they can affect vehicle performance and safety, including such things as airbags, braking, stability, ride and handling, emissions systems, aerodynamics, durability, and electronic systems like antilock brakes, traction control, and stability control.
California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals.
This vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 2-72. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 7-14. Adding Equipment to the Outside of the Vehicle Things added to the outside of the vehicle can affect the airflow around it. This can cause wind noise and can affect fuel economy and windshield washer performance.
Gasoline Octane Gasoline Specifications If the vehicle has the 2.4L L4 engine (VIN Code B), the 2.4L L4 engine (VIN Code 0), the 3.5L V6 engine (VIN Code K), the 3.5L V6 engine (VIN Code N), or the 3.9L V6 engine (VIN Code 1), use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, you might notice an audible knocking noise when you drive, commonly referred to as spark knock.
Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control system to work properly. In most cases, you should not have to add anything to the fuel. However, some gasolines contain only the minimum amount of additive required to meet U.S. Environmental Protection Agency regulations.
Fuel E85 (85% Ethanol) The 8th digit of the Vehicle Identification Number (VIN) shows the code letter or number that identifies the vehicle’s engine. The VIN is at the top left of the instrument panel. See Vehicle Identification Number (VIN) on page 6-114. If the vehicle has the 2.4L L4 engine (VIN Code 0) or the 3.5L V6 engine (VIN Code K), you can use either unleaded gasoline or ethanol fuel containing up to 85% ethanol (E85). See Fuel on page 6-6.
To ensure quick starts in the wintertime, the E85 fuel must be formulated properly for your climate according to ASTM specification D 5798. If you have trouble starting on E85, it could be because the E85 fuel is not properly formulated for your climate. If this happens, switching to gasoline or adding gasoline to the fuel tank can improve starting. For good starting and heater efficiency below 32°F (0°C), the fuel mix in the fuel tank should contain no more than 70% ethanol.
Fuels in Foreign Countries If you plan on driving in another country outside the United States or Canada, the proper fuel might be hard to find. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel would not be covered by the vehicle warranty. To check the fuel availability, ask an auto club, or contact a major oil company that does business in the country where you will be driving.
To remove the fuel cap, turn it slowly counterclockwise. The fuel cap has a spring in it; if the cap is released too soon, it will spring back to the right. While refueling, hang the tethered fuel cap from the hook on the fuel door. { WARNING: Fuel can spray out on you if you open the fuel cap too quickly. If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if the tank is nearly full, and is more likely in hot weather.
Filling a Portable Fuel Container { WARNING: If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump or by notifying the station attendant. Leave the area immediately. Notice: If you need a new fuel cap, be sure to get the right type. Your dealer/retailer can get one for you. If you get the wrong type, it may not fit properly. This may cause the malfunction indicator lamp to light and may damage the fuel tank and emissions system.
Checking Things Under the Hood { WARNING: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. 6-14 { WARNING: Things that burn can get on hot engine parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and plastic or rubber. You or others could be burned. Be careful not to drop or spill things that will burn onto a hot engine.
Hood Release To open the hood: 1. Pull the handle with this symbol on it. It is located under the instrument panel on the driver side of the vehicle. 2. Then go to the front of the vehicle and push the secondary hood release lever to the right. 3. Lift the hood, release the hood prop rod from its retainer, and put the hood prop into the slot in the hood marked with an arrow. Before closing the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on the hood prop.
Engine Compartment Overview When the hood on the 2.
A. Engine Air Cleaner/Filter on page 6-26. B. Engine Cooling Fan. See Cooling System on page 6-30. C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 6-21. D. Engine Oil Dipstick (Out of View). See “Checking Engine Oil” under Engine Oil on page 6-21. E. Engine Coolant Surge Tank. See Engine Coolant on page 6-31. F. Pressure Cap. See Cooling System on page 6-30. G. Brake Master Cylinder Reservoir. See “Brake Fluid” under Brakes on page 6-39. H. Battery on page 6-42. I.
When the hood on the 3.5 L V6 engine (3.
A. Engine Air Cleaner/Filter on page 6-26. B. Power Steering Fluid on page 6-37. C. Engine Cooling Fan. See Cooling System on page 6-30. D. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 6-21. E. Engine Oil Dipstick. See “Checking Engine Oil” under Engine Oil on page 6-21. F. Engine Coolant Surge Tank. See Engine Coolant on page 6-31. G. Pressure Cap. See Cooling System on page 6-30. H. Brake Master Cylinder Reservoir. See “Brake Fluid” under Brakes on page 6-39. I.
When the hood on the 3.
A. Engine Air Cleaner/Filter on page 6-26. B. Power Steering Fluid on page 6-37. C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 6-21. D. Engine Oil Dipstick. See “Checking Engine Oil” under Engine Oil on page 6-21. E. Electric Engine Cooling Fans (Out of View). See Cooling System on page 6-30. F. Engine Coolant Surge Tank. See Engine Coolant on page 6-31. G. Pressure Cap. See Cooling System on page 6-30. H. Brake Master Cylinder Reservoir.
When to Add Engine Oil Notice: Do not add too much oil. If the engine has so much oil that the oil level gets above the upper mark that shows the proper operating range, the engine could be damaged. See Engine Compartment Overview on page 6-16 for the location of the engine oil fill cap. L4 Engine V6 Engine If the oil is below the MIN mark for the L4 engine or below the cross-hatched area at the tip of the dipstick for the V6 engine, add at least one quart/liter of the recommended oil.
What Kind of Engine Oil to Use Look for three things: • American Petroleum Institute (API) starburst symbol Oils meeting these requirements should have the starburst symbol on the container. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). Notice: Use only engine oil identified as meeting GM Standard GM6094M and showing the American Petroleum Institute Certified For Gasoline Engines starburst symbol.
Engine Oil Additives / Engine Oil Flushes Do not add anything to the oil. The recommended oils with the starburst symbol that meet GM Standard GM6094M are all that is needed for good performance and engine protection. Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty. Engine Oil Life System When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter.
How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE OIL SOON message being turned on, reset the system. After changing the engine oil and filter, the system must be reset. To reset the oil life system: 1.
Engine Air Cleaner/Filter When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 80 000 km (50,000 mile) interval. See Scheduled Maintenance on page 7-3 for more information. If you are driving in dusty/dirty conditions, inspect the filter at each engine oil change. How to Inspect the Engine Air Cleaner/Filter See Engine Compartment Overview on page 6-16 for the location of the engine air cleaner/filter.
{ WARNING: Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. If it is not there and the engine backfires, you could be burned. Do not drive with it off, and be careful working on the engine with the air cleaner/filter off. Notice: If the air cleaner/filter is off, a backfire can cause a damaging engine fire. And, dirt can easily get into the engine, which will damage it.
Automatic Transmission Fluid (3.9L V6 Engine) When to Check and Change Automatic Transmission Fluid A good time to check the automatic transmission fluid level is when the engine oil is changed. Change the fluid and filter at the intervals listed in Scheduled Maintenance on page 7-3 and be sure to use the transmission fluid listed in Recommended Fluids and Lubricants on page 7-10.
Checking the Fluid Level Prepare the vehicle as follows: 3. Reinstall it back in all the way, wait three seconds, and then pull it back out again. 1. Park the vehicle on a level place. Keep the engine running. 2. With the parking brake applied, place the shift lever in P (Park). 3. With your foot on the brake pedal, move the shift lever through each gear, pausing for about three seconds in each one. Then, position the shift lever in P (Park). 4. Let the engine run at idle for three to five minutes.
How to Add Automatic Transmission Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. See Recommended Fluids and Lubricants on page 7-10. Cooling System The cooling system allows the engine to maintain the correct working temperature. If the fluid level is low, add only enough of the proper fluid to bring the level into the crosshatched area on the dipstick. 1. Remove the dipstick. 2.
{ WARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. Notice: Using coolant other than DEX-COOL® can cause premature engine, heater core, or radiator corrosion. In addition, the engine coolant could require changing sooner, at 50 000 km (30,000 miles) or 24 months, whichever occurs first. Any repairs would not be covered by the vehicle warranty.
What to Use { WARNING: Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned. Use a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant.
How to Add Coolant to the Coolant Surge Tank { WARNING: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged.
2. Keep turning the pressure cap slowly and remove it. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. By this time, the coolant level inside the coolant surge tank might be lower. If the level is lower than the FULL COLD mark, add more of the proper mixture to the coolant surge tank until the level reaches the FULL COLD mark. 5. Replace the pressure cap.
Engine Overheating The vehicle has an indicator to warn of engine overheating. If Steam Is Coming From The Engine Compartment There is an engine coolant temperature gage on the instrument panel cluster. See Engine Coolant Temperature Gage on page 4-33. { WARNING: You may decide not to lift the hood when this warning appears, but instead get service help right away. See Roadside Assistance Program on page 8-7. Steam from an overheated engine can burn you badly, even if you just open the hood.
If No Steam Is Coming From The Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: • • • • Climbs a long hill on a hot day. Stops after high-speed driving. Idles for long periods in traffic. Tows a trailer. If the overheat warning is displayed with no sign of steam: 1. Turn the air conditioning off. 2.
Overheated Engine Protection Operating Mode This emergency operating mode lets the vehicle be driven to a safe place in an emergency situation. If an overheated engine condition exists, an overheat protection mode which alternates firing groups of cylinders helps prevent engine damage. In this mode, there is a significant loss in power and engine performance. The temperature gage indicates an overheat condition exists.
How to Check Power Steering Fluid Windshield Washer Fluid To check the power steering fluid: What to Use 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. 3. Unscrew the cap and wipe the dipstick with a clean rag. 4. Replace the cap and completely tighten it. 5. Remove the cap again and look at the fluid level on the dipstick The fluid level should be within the crosshatched area on the dipstick.
Notice: • When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. • Do not mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system. Also, water does not clean as well as washer fluid. • Fill the washer fluid tank only three-quarters Brakes Brake Fluid The brake master cylinder reservoir is filled with DOT 3 brake fluid.
Do not top off the brake fluid. Adding fluid does not correct a leak. If fluid is added when the linings are worn, there will be too much fluid when new brake linings are installed. Add or remove brake fluid, as necessary, only when work is done on the brake hydraulic system. What to Add Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 7-10. Always clean the brake fluid reservoir cap and the area around the cap before removing it.
Brake Wear This vehicle has disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or be heard all the time the vehicle is moving, except when applying the brake pedal firmly. { WARNING: The brake wear warning sound means that soon the brakes will not work well. That could lead to an accident. When the brake wear warning sound is heard, have the vehicle serviced.
Battery Refer to the replacement number on the original battery label when a new battery is needed. See Engine Compartment Overview on page 6-16 for battery location. { DANGER: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. Vehicle Storage { WARNING: Batteries have acid that can burn you and gas that can explode. You can be badly hurt if you are not careful.
Jump Starting If the vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. { WARNING: Batteries can hurt you. They can be dangerous because: • They contain acid that can burn you. • They contain gas that can explode or ignite. • They contain enough electricity to burn you. If you do not follow these steps exactly, some or all of these things can hurt you.
Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty. Always turn off the radio and other accessories when jump starting the vehicle. 3. Turn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lighter or the accessory power outlet. Turn off the radio and all lamps that are not needed. This will avoid sparks and help save both batteries.
5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one. Negative (−) will go to a heavy, unpainted metal engine part or to a remote negative (−) terminal if the vehicle has one.
8. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery. It goes to a heavy, unpainted metal engine part or to a remote negative (−) terminal on the vehicle with the dead battery.
To disconnect the jumper cables from both vehicles, do the following: Bulb Replacement 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. For the proper type of replacement bulbs, see Replacement Bulbs on page 6-54. 2. Disconnect the black negative (−) cable from the vehicle with the good battery. For any bulb changing procedure not listed in this section, contact your dealer/retailer. 3. Disconnect the red positive (+) cable from the vehicle with the good battery.
Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps A. Front Sidemarker B. Front Turn Signal/ Parking Lamp C. Low-Beam Headlamp D. High-Beam Headlamp To replace one of these bulbs: 1. Remove the two screws that secure the headlamp assembly. 2. Remove the fasteners of the front facia by lifting under them. 3. Pull the front facia back and then pull the headlamp assembly out of the vehicle. Assistance may be needed with this step to avoid possible damage to the vehicle. 4.
5. Remove the bulb access cover by turning it counterclockwise. 6. Turn the bulb socket counterclockwise and pull out the bulb assembly. 7. Disconnect the bulb socket from the wiring harness for headlamps. For the front turn signal/parking or sidemarker bulbs, unclip the bulb from the socket. 8. Install a new bulb. Center High-Mounted Stoplamp (CHMSL) (Sedan) To replace a center high-mounted stoplamp (CHMSL) bulb: 1. Open the trunk. See Trunk on page 3-11. 2.
5. Remove the bulb by turning it counterclockwise. 6. Turn the bulb clockwise to install it. 7. Reinstall the cover and reconnect the wiring harness. Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps (Sedan) Center High-Mounted Stoplamp (CHMSL) (Retractable Hardtop and Coupe) If your vehicle has this component and it needs replacement, it is recommended that it be replaced as a unit by your dealer/retailer. A. Stoplamp/Taillamp/Turn Signal B. Sidemarker Lamp C.
Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps (Coupe) 4. Remove the two nuts that hold the taillamp assembly. 5. Remove the taillamp assembly. 6. Turn the bulb socket counterclockwise to remove. 7. Pull the bulb straight out of the socket. 8. Push the new bulb straight in until it clicks. 9. Turn the bulb socket clockwise to reinstall. A. Sidemarker Lamp B. Stoplamp/Taillamp/Turn Signal Lamp C. Back-up Lamp 10.
To replace one of these bulbs: 1. Open the trunk. See Trunk on page 3-11. 2. Remove the convenience net. 4. Remove the three hex nuts retaining the taillamp assembly. 5. Pull the assembly off to the side to release it from the rear of the vehicle. 6. Turn the bulb socket counterclockwise to remove from the taillamp assembly. 7. Pull the bulb from the socket. 8. Push the new bulb into the socket until it clicks. 9. Turn the bulb socket clockwise to reinstall into the taillamp assembly. 10.
Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps (Retractable Hardtop) To replace one of these bulbs: 1. Open the trunk. See Trunk on page 3-11. 2. Locate the three rubber covers in the trunk trim, near the taillamp assembly and remove them. 3. Remove the two nuts and one bolt retaining the taillamp assembly. 4. Pull off the taillamp assembly to the side to release it from the vehicle. 5. Turn the bulb socket counterclockwise to remove. 6. Pull the bulb from the bulb socket. 7.
License Plate Lamp To replace the license plate lamp bulb: 1. Remove the license plate assembly by turning the two screws counterclockwise. 2. Turn and pull the license plate lamp forward through the fascia opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Push the new bulb in and turn it clockwise to install. 5. Replace the license plate lamp by pushing it through the fascia opening. 6.
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 7-3 for more information on wiper blade inspection. Replacement blades come in different types and are removed in different ways. Here is how to remove the wiper blade: 1. Pull the windshield wiper arm connector away from the windshield. 3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.
Tires WARNING: Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer. { WARNING: • Poorly maintained and improperly used tires are dangerous. • Overloading your tires can cause overheating as a result of too much flexing. You could have an air-out and a serious accident.
Low-Profile Performance Tire Winter Tires If your vehicle has P225/50R18 or P225/50R17 size tires, they are classified as low-profile performance tires. These tires are designed for very responsive driving on wet or dry pavement. You may also notice more road noise with low-profile performance tires and that they tend to wear faster. If your vehicle has P225/50R18 size tires, they are classified as low-profile performance tires. These tires are designed for very responsive driving on wet or dry pavement.
If you choose to use winter tires: • Use tires of the same brand and tread type on all four wheel positions. • Use only radial ply tires of the same size, load range, and speed rating as your original equipment tires. Winter tires with the same speed rating as your original equipment tires may not be available for H, V, W and ZR speed rated tires. If you choose winter tires with a lower speed rating, never exceed the tire’s maximum speed capability.
(B) TPC Spec (Tire Performance Criteria Specification): Original equipment tires designed to GM’s specific tire performance criteria have a TPC specification code molded onto the sidewall. GM’s TPC specifications meet or exceed all federal safety guidelines. (G) Maximum Cold Inflation Load Limit: Maximum load that can be carried and the maximum pressure needed to support that load.
If your vehicle has a compact spare tire, see Compact Spare Tire on page 6-106 and If a Tire Goes Flat on page 6-81. (B) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (C) Tire Identification Number (TIN): The letters and numbers following the DOT (Department of Transportation) code is the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured.
Tire Terminology and Definitions (C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 60, as shown in item C of the illustration, it would mean that the tire’s sidewall is 60 percent as high as it is wide. Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa).
Bias Ply Tire: A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread. Cold Tire Pressure: The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving. See Inflation - Tire Pressure on page 6-64.
Maximum Load Rating: The load rating for a tire at the maximum permissible inflation pressure for that tire. Maximum Loaded Vehicle Weight: The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight: The number of occupants a vehicle is designed to seat multiplied by 150 lbs (68 kg). See Loading the Vehicle on page 5-18. Recommended Inflation Pressure: Vehicle manufacturer’s recommended tire inflation pressure as shown on the tire placard.
UTQGS (Uniform Tire Quality Grading Standards): A tire information system that provides consumers with ratings for a tire’s traction, temperature, and treadwear. Ratings are determined by tire manufacturers using government testing procedures. The ratings are molded into the sidewall of the tire. See -74318Uniform Tire Quality Grading on page 6-78. Vehicle Capacity Weight: The number of designated seating positions multiplied by 150 lbs (68 kg) plus the rated cargo load.
A vehicle specific Tire and Loading Information label is attached to your vehicle. This label shows your vehicle’s original equipment tires and the correct inflation pressures for your tires when they are cold. The recommended cold tire inflation pressure, shown on the label, is the minimum amount of air pressure needed to support your vehicle’s maximum load carrying capacity.
High-Speed Operation { WARNING: Driving at high speeds, 160 km/h (100 mph) or higher, puts an additional strain on tires. Sustained high-speed driving causes excessive heat build up and can cause sudden tire failure. You could have a crash and you or others could be killed. Some high-speed rated tires require inflation pressure adjustment for high speed operation.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale.
At the same time a message to check the pressure in a specific tire appears on the Driver Information Center (DIC) display. The low tire pressure warning light and the DIC warning message come on at each ignition cycle until the tires are inflated to the correct inflation pressure. Using the DIC, tire pressure levels can be viewed by the driver. For additional information and details about the DIC operation and displays see DIC Operation and Displays on page 4-40 and DIC Warnings and Messages on page 4-42.
TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message is also displayed. The low tire warning light and DIC warning message come on at each ignition cycle until the problem is corrected.
TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. Any time you replace one or more of the TPMS sensors or rotate the vehicle’s tires, the identification codes need to be matched to the new tire/wheel location. The sensors are matched, to the tire/wheel locations, in the following order: driver side front tire, passenger side front tire, passenger side rear tire, and driver side rear tire using a TPMS diagnostic tool. See your dealer/retailer for service.
6. The passenger side front turn signal comes on to indicate that corner sensor is ready to be learned. Proceed to the passenger side front tire and repeat the procedure in Step 5. 7. The passenger side rear turn signal comes on to indicate that corner sensor is ready to be learned. Proceed to the passenger side rear tire and repeat the procedure in Step 5. 8. The driver side rear turn signal comes on to indicate that corner sensor is ready to be learned.
6. Remove the valve cap from the tire’s valve stem. Activate the TPMS sensor by increasing or decreasing the tire’s air pressure for about eight seconds. The horn chirp, can take up to 30 seconds to sound. It chirps one time and then all the turn signals flash one time to confirm the sensor identification code has been matched to the tire/wheel position. 7. The passenger side front turn signal comes on to indicate that corner sensor is ready to be learned.
Tire Inspection and Rotation We recommend that you regularly inspect your vehicle’s tires, including the spare tire, for signs of wear or damage. See When It Is Time for New Tires on page 6-74 for more information. Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). See Scheduled Maintenance on page 7-3. The purpose of a regular tire rotation is to achieve a uniform wear for all tires on the vehicle.
Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation on page 6-67. Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Specifications on page 6-125. { WARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
You need new tires if any of the following statements are true: • You can see the indicators at three or more places around the tire. • You can see cord or fabric showing through the tire’s rubber. • The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric. • The tire has a bump, bulge, or split. • The tire has a puncture, cut, or other damage that cannot be repaired well because of the size or location of the damage.
GM recommends replacing tires in sets of four. This is because uniform tread depth on all tires will help keep your vehicle performing most like it did when the tires were new. Replacing less than a full set of tires can affect the braking and handling performance of your vehicle. See Tire Inspection and Rotation on page 6-73 for information on proper tire rotation. { WARNING: Mixing tires could cause you to lose control while driving.
Your vehicle’s original equipment tires are listed on the Tire and Loading Information Label. See Loading the Vehicle on page 5-18, for more information about the Tire and Loading Information Label and its location on your vehicle. Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, including its braking, ride and handling characteristics, stability, and resistance to rollover.
Uniform Tire Quality Grading Treadwear Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1.5) times as well on the government course as a tire graded 100.
Temperature – A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
If you need to replace any of your wheels, wheel bolts, wheel nuts, or Tire Pressure Monitor System (TPMS) sensors, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts, wheel nuts, and TPMS sensors for your vehicle. { WARNING: Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle can be dangerous. It could affect the braking and handling of your vehicle, make your tires lose air and make you lose control.
Tire Chains { WARNING: Do not use tire chains, there is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others may be injured in a crash. Use another type of traction device only if its manufacturer recommends it for use on your vehicle and tire size combination and road conditions.
It may be very bumpy and noisy, but you can still steer. Gently brake to a stop, well off the road if possible. Tire Sealant and Compressor Kit { WARNING: { WARNING: Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack.
The kit includes: { WARNING: Storing the tire sealant and compressor kit or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store the tire sealant and compressor kit in its original location. If this vehicle has a tire sealant and compressor kit, there may not be a spare tire, tire changing equipment, and on some vehicles there may not be a place to store a tire.
Tire Sealant Read and follow the safe handling instructions on the label adhered to the compressor. Check the tire sealant expiration date on the sealant canister. The sealant canister should be replaced before its expiration date. Replacement sealant canisters are available at your local dealer/retailer. See “Removal and Installation of the Sealant Canister” following.
Always do a safety check first. See If a Tire Goes Flat on page 6-81. Do not remove any objects that have penetrated the tire. 1. Remove the tire sealant and compressor kit from its storage location. See Tire Sealant and Compressor Kit Storage on page 6-89. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window. 2.
10. Inflate the tire to the recommended inflation pressure using the pressure gage (D). The recommended inflation pressure can be found on the Tire and Loading Information label. See Inflation - Tire Pressure on page 6-64. The pressure gage (D) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate pressure reading. The compressor may be turned on/off until the correct pressure is reached.
19. Stop at a safe location and check the tire pressure. Refer to Steps 1 through 11 under “Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured).” If the tire pressure has fallen more than 10 psi (68 kPa) below the recommended inflation pressure, stop driving the vehicle. The tire is too severely damaged and the tire sealant cannot seal the tire. See Roadside Assistance Program on page 8-7.
3. Place the kit on the ground. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 4. Remove the tire valve stem cap from the flat tire by turning it counterclockwise. 5. Attach the air only hose (E) onto the tire valve stem by turning it clockwise until it is tight. 6. Plug the power plug (G) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Accessory Power Outlet(s) on page 4-15.
Removal and Installation of the Sealant Canister Tire Sealant and Compressor Kit Storage To remove the sealant canister: The tire sealant and compressor kit is located in the trunk. 1. Open the trunk. See Trunk on page 3-11. 2. Lift the cover. 1. 2. 3. 4. Remove the plastic cover. Unscrew the connector (B) from the canister (A). Pull up on the canister (A) to remove it. Replace with a new canister which is available from your dealer/retailer. 5. Push the new canister into place. 6.
Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 4-3. (Continued) 3. Turn off the engine and do not restart while the vehicle is raised. 4. Do not allow passengers to remain in the vehicle. { WARNING: Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people. You and they could be badly injured or even killed.
3. If you have a sedan or coupe model, remove the spare tire cover. If you have a retractable hardtop model, unlatch the trunk cargo cover so that it is in the open position. Then remove the cover from the spare tire. A. Wheel Block B. Flat Tire The following information explains how to use the jack and change a tire. Removing the Spare Tire and Tools The equipment you will need is located in the trunk. 1. If you have a retractable hardtop model, make sure the hardtop is in the up position. 2.
The tools you will be using include the wheel wrench (A) and jack (B). 1. Turn the plastic wing nut counterclockwise to loosen the wheel wrench. 2. Unhook the wheel wrench from the jack.
Removing the Flat Tire and Installing the Spare Tire 1. It is recommended a safety check is done before proceeding. See Changing a Flat Tire on page 6-90 for more information. 2. If your vehicle has a wheel cover or hubcap that has plastic wheel nut caps, then loosen the plastic nut caps. You may need to use the wheel wrench to loosen them. Do not pry off wheel covers or center caps that have plastic wheel nut caps. 3.
4. Use the wheel wrench to loosen all the wheel nuts. Do not remove them yet. 5. Position the lift head at the jack location nearest the flat tire. Make sure all of the jack lift head is touching the jacking flange under the body. Do not place the jack under a body panel. The lower body panel has an arrow to aid in locating the jacking location. 6. Put the compact spare tire near the flat tire being changed.
{ WARNING: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. { WARNING: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle. 7.
10. Remove any rust or dirt from the wheel bolts, mounting surfaces, and spare wheel. 8. Remove all of the wheel nuts. 9. Remove the flat tire. { WARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
11. Install the compact spare tire. 12. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. Tighten each nut by hand until the wheel is held against the hub. { WARNING: Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle’s wheel could fall off, causing a crash. 13. Lower the vehicle by turning the wheel wrench counterclockwise. Lower the jack completely.
14. Tighten the wheel nuts firmly in a crisscross sequence, as shown, with the wheel wrench. Notice: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. See Capacities and Specifications on page 6-125 for the wheel nut torque specification. Do not try to put a wheel cover on your compact spare tire. It will not fit.
Storing a Flat or Spare Tire and Tools Storing a Flat Tire and Tools — All Models Except GXP and Retractable Hardtop { WARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. 3. Collapse the wrench using the same button used to extend it. To store the flat tire and jack in the compact spare tire compartment: 4.
5. Raise the jack to the height shown and lock the wrench onto the jack. 7. With the valve stem up, place the tire on the compartment floor with the rear of the tire under the trim panel. The tire may not lay completely flat. 8. Line up the bolt with the wheel center. 9. With the yellow cap in place to prevent the wheel from being scratched, screw the bolt extension onto the bolt through the wheel center hole. 10. Remove the yellow cap from the bolt extension. 11.
A. B. C. D. E. F. G. Cover Wing Nut Extension Flat Tire (valve stem up) Nut Jack Bolt The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. See Compact Spare Tire on page 6-106. Storing a Flat Tire and Tools — GXP and Retractable Hardtop Models To store the flat tire and jack in the compact spare tire compartment: 1. Make sure the retractable hardtop is in the up position. 2. Open the trunk. See Trunk on page 3-11. 3.
7. Raise the jack to the height shown and lock the wrench onto the jack. 5. Collapse the wrench using the same button used to extend it. 6. Attach the wrench to the jack by placing the tab on the wrench into the hole on the side of the jack. Then place the wrench handle over the tab on the side of the jack. 8. Place the jack over the bolt (B) on the floor, making sure it contacts the bolt.
9. Place the extension bolt (A) onto the bolt (B). 10. Thread the jack retainer nut (C) until it is at or near the end of the threads. 11. While placing the flat tire in the wheel tub, reach under the wheel and lift the extension bolt so the threaded end of the bolt passes through the center hole of the wheel. 12. Remove the yellow cap. 13. Secure the tire and wheel with the larger wing nut. 14. Replace the cover. A. Cover B. Retainer C. Flat Tire (Valve Stem Up) D. Nut E. Bolt Extension F.
Storing the Spare Tire and Tools — All Models Except Retractable Hardtop { WARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. 1. Open the trunk. See Trunk on page 3-11. 2. Collapse the wrench using the same button used to extend it. 3. Attach the wrench to the jack by placing the tab on the wrench into the hole on the side of the jack.
4. Raise the jack to the height shown and lock the wrench onto the jack. 5. Place the jack in the spare tire well. Make sure the stow bolt goes through the hole in the center of the wrench on the jack, with the base of the jack towards the front of the vehicle. Turn the jack retainer nut until it firmly contacts the wrench. Do not over tighten. 6. Place the compact spare into the tire compartment with the stow bolt going through the center hole of the wheel.
Compact Spare Tire { WARNING: Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time. 3,000 miles (5 000 km), so you can finish your trip and have the full-size tire repaired or replaced at your convenience. Of course, it is best to replace the spare with a full-size tire as soon as possible.
Appearance Care Interior Cleaning The vehicle’s interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on the upholstery. Dirt can damage carpet, fabric, leather, and plastic surfaces. Regular vacuuming is recommended to remove particles from the upholstery. It is important to keep the upholstery from becoming and remaining heavily soiled. Soils should be removed as quickly as possible.
Do not clean the vehicle using: • A knife or any other sharp object to remove a soil from any interior surface. • A stiff brush. It can cause damage to the vehicle’s interior surfaces. • Heavy pressure or aggressive rubbing with a cleaning cloth. Use of heavy pressure can damage the interior and does not improve the effectiveness of soil removal. • Laundry detergents or dishwashing soaps with degreasers can leave residue that streaks and attracts dirt. For liquid cleaners, about 20 drops per gallon (3.
If any of the soil remains, a commercial fabric cleaner or spot lifter may be necessary. When a commercial upholstery cleaner or spot lifter is to be used, test a small hidden area for colorfastness first. If the locally cleaned area gives any impression that a ring formation may result, clean the entire surface. After the cleaning process has been completed, a paper towel can be used to blot excess moisture from the fabric or carpet. Leather A soft cloth dampened with water can be used to remove dust.
Care of Safety Belts Washing Your Vehicle Keep belts clean and dry. The best way to preserve the vehicle’s finish is to keep it clean by washing it often. { WARNING: Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Weatherstrips Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak.
Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. High pressure car washes may cause water to enter the vehicle. Avoid using high pressure washes closer than 12 inches (30 cm) to the surface of the vehicle. Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses.
Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean the rubber blades using a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged.
Tires Finish Damage To clean the tires, use a stiff brush with tire cleaner. Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense. Notice: Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle.
At least every spring, flush these materials from the underbody with plain water. Clean any areas where mud and debris can collect. Dirt packed in close areas of the frame should be loosened before being flushed. Your dealer/retailer or an underbody car washing system can do this. Vehicle Identification Vehicle Identification Number (VIN) Chemical Paint Spotting Some weather and atmospheric conditions can create a chemical fallout.
Service Parts Identification Label Add-on equipment can drain the vehicle battery, even if the vehicle is not operating. This label, on the inside of the glove box, has the following information: The vehicle has an airbag system. Before attempting to add anything electrical to the vehicle, see Servicing Your Airbag-Equipped Vehicle on page 2-72 and Adding Equipment to Your Airbag-Equipped Vehicle on page 2-72.
Fuses The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible links. This greatly reduces the chance of damage caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a new one of the identical size and rating.
Fuses Usage AIRBAG (BATT) Airbag (Battery) AIRBAG (IGN) Airbag (Ignition) Fuses Usage CLUSTER/ THEFT Instrument Panel Cluster, Theft Deterrent System DOOR LOCK Door Locks 6-117
Fuses Usage EPS Electronic Power Steering FUSE PULLER Fuse Puller HVAC BLOWER Heating Ventilation Air Conditioning Blower Switch HVAC Heating Ventilation Air Conditioning BLOWER HIGH Blower - High Speed Relay HVAC CTRL (BATT) Heating Ventilation Air Conditioning Control Diagnostic Link Connector (Battery) HVAC CTRL (IGN) Heating Ventilation Air Conditioning Control (Ignition) IGN SENSOR Ignition Switch INTERIOR LIGHTS Interior Lamps NOT INSTALLED Not Used NOT INSTALLED Not Used 6-118 Fu
Fuses Usage Engine Compartment Fuse Block SPARE FUSE HOLDER Spare Fuse Holder The vehicle may not be equipped with all the fuses and features listed. SPARE FUSE HOLDER Spare Fuse Holder The engine compartment fuse block is located on the driver side of the engine compartment, near the battery. SPARE FUSE HOLDER Spare Fuse Holder SPARE FUSE HOLDER Notice: Spilling liquid on any electrical components on the vehicle may damage it. Always keep the covers on any electrical component.
Fuses 6-120 Usage 1 Air Conditioner Clutch 2 Electronic Throttle Control 3 Not Used Fuses Usage 4 Transmission Control Module Ignition 1 5 Mass Airflow Sensor (LY7) 6 Emission
Fuses Usage Fuses Usage 7 Left Headlamp Low Beam 26 Starter 8 Horn 41 Electric Power Steering 42 Transmission Control Module Battery 43 Ignition Module (LE5, LE9, LZ4, LZE, LZ9), Odd Cylinder Injectors/Ignition Coils (LY7) 44 Injectors (LE5, LE9, LZ4, LZE, LZ9), Even Cylinder Injectors/Ignition Coils (LY7) 45 Rear Oxygen Sensors (LZ4, LZE, LZ9, LY7) 9 Right Headlamp Low Beam 10 Front Fog Lamps 11 Left Headlamp High Beam 12 Right Headlamp High Beam 13 Engine Control Module (Batte
Relays 6-122 Usage 28 Cooling Fan 1 29 Cooling Fan Series/Parallel 30 Cooling Fan 2 31 Starter 32 Run/Crank, Ignition 33 Powertrain 34 Air Conditioning Clutch 35 High Beam 36 Front Fog Lamps 37 Horn 38 Low Beam 39 Windshield Wiper 1 40 Windshield Wiper 2 48 Daytime Running Lamps 49 Center High-Mounted Stoplamp 53 AIR Solenoid Diodes 27 Usage Wiper Rear Compartment Fuse Block The rear compartment fuse block is located in the trunk of the vehicle.
Fuses Usage 1 Rear Quarter Windows (Retractable Hardtop Only) 2 Driver Seat Controls Fuses Usage 3 Retractable Hardtop 4 Not Used 5 Emission 2, Canister Vent Solenoid 6-123
Fuses 6-124 Usage Fuses Usage 6 Park Lamps, Instrument Panel Dimming 23 Rear Defog 7 Not Used 24 Not Used 25 8 Not Used Fuel Pump 9 Not Used 10 Sunroof Controls 26 Rear Window Defogger 11 Not Used 27 Park Lamps 12 Retractable Hardtop Controller 28 Not Used 13 Audio Amplifier 29 Not Used 14 Heated Seat Controls 30 Not Used 15 Not Used Remote Keyless Entry System, XM Satellite Radio 31 Not Used 16 32 Not Used 17 Back-up Lamps 33 Back-up Lamps 18 Not Used 34
Capacities and Specifications The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 7-10 for more information. Capacities Application Air Conditioning Refrigerant R134a Metric English For the air conditioning system refrigerant charge amount, see the refrigerant caution label located under the hood. See your dealer/retailer for more information. Automatic Transmission* Automatic 4-Speed 4T65 Transmission (Bottom Pan Removal) 7.
Capacities Application Metric English 2.4L L4 Engine 7.1 L 7.5 qt 3.5L, 3.6L, 3.9L V6 Engines 9.2 L 9.7 qt 2.4L L4 Engine 4.7 L 5.0 qt 3.5L and 3.9L V6 Engines 3.8 L 4.0 qt 3.6L V6 Engine 5.2 L 5.5 qt 61.7 L 16.3 gal 140 Y 100 lb ft Cooling System Engine Oil with Filter Fuel Tank Wheel Nut Torque *Transmission fluid capacity is approximate. See Automatic Transmission Fluid (2.4L L4, 3.5L V6 and 3.6L V6 Engines) on page 6-27 or Automatic Transmission Fluid (3.
Engine Specifications VIN Code Transmission Spark Plug Gap 2.4L L4 Engine Engine B Automatic 1.01 mm (0.040 in) 2.4L L4 Engine 0 Automatic 1.01 mm (0.040 in) 3.5L V6 Engine K Automatic 1.01 mm (0.040 in) 3.5L V6 Engine N Automatic 1.01 mm (0.040 in) 3.6L V6 Engine 7 Automatic 1.01 mm (0.040 in) 3.9L V6 Engine 1 Automatic 1.01 mm (0.
✍ NOTES 6-128
Section 7 Maintenance Schedule Maintenance Schedule ......................................7-2 Introduction ...................................................7-2 Scheduled Maintenance ...................................7-3 Owner Checks and Services ............................7-8 Recommended Fluids and Lubricants ...............7-10 Maintenance Replacement Parts .....................7-11 Engine Drive Belt Routing ..............................7-12 Maintenance Record .....................................
Maintenance Schedule { WARNING: Introduction Notice: Maintenance intervals, checks, inspections, recommended fluids, and lubricants are necessary to keep this vehicle in good working condition. Damage caused by failure to follow scheduled maintenance might not be covered by the vehicle warranty. Proper vehicle maintenance helps to keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions for better air quality.
Rotation of New Tires To maintain ride, handling, and performance of the vehicle, it is important that the first rotation service for new tires be performed when they have 8 000 to 13 000 km (5,000 to 8,000 miles). See Tire Inspection and Rotation on page 6-73. When the Change Oil Soon message displays, certain services, checks, and inspections are required. The services described for Maintenance I should be performed at every engine oil change.
• Fluids visual leak check (or every 12 months, whichever occurs first). A leak in any system must be repaired and the fluid level checked. • Engine air cleaner filter inspection (vehicles driven in dusty conditions only). See Engine Air Cleaner/ Filter on page 6-26. • Brake system inspection (or every 12 months, whichever occurs first). Maintenance II • Perform all services described in Maintenance I. • Steering and suspension inspection.
Once a Month • Tire inflation check. See Inflation - Tire Pressure on page 6-64. • Tire wear inspection. See Tire Inspection and Rotation on page 6-73. Once a Year • Starter switch check. See Owner Checks and Services on page 7-8. • Parking brake and automatic transmission P (Park) mechanism check. See Owner Checks and Services on page 7-8. • Automatic transmission shiftlock control system • Ignition transmission lock check. See Owner Checks and Services on page 7-8.
First Engine Oil Change After Every 40 000 km/25,000 Miles • Fuel system inspection for damage or leaks. First Engine Oil Change After Every 80 000 km/50,000 Miles • Engine air cleaner filter replacement. See Engine Air Cleaner/Filter on page 6-26. • Automatic transmission fluid change (severe service) for vehicles mainly driven in heavy city traffic in hot weather, in hilly or mountainous terrain, when frequently towing a trailer, or used for taxi, police, or delivery service.
Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and filter. Reset oil life system. • • Engine coolant level check. • • Windshield washer fluid level check. • • Tire inflation pressures check. • • Tire wear inspection. • • Rotate tires. • • Fluids visual leak check. • • Engine air cleaner filter inspection (vehicles driven in dusty conditions only). • • Brake system inspection. • • Steering and suspension inspection.
Owner Checks and Services Starter Switch Check { WARNING: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. Automatic Transmission Shift Lock Control System Check { WARNING: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 1.
Ignition Transmission Lock Check While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. • The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). • The ignition key should come out only in LOCK/OFF. Contact your dealer/retailer if service is required. Parking Brake and Automatic Transmission P (Park) Mechanism Check Park on a fairly steep hill, with the vehicle facing downhill.
Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number, or specification can be obtained from your dealer/retailer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines Engine Oil starburst symbol. To determine the proper viscosity for your vehicle’s engine, see Engine Oil on page 6-21. 50/50 mixture of clean, drinkable ® Engine Coolant water and use only DEX-COOL Coolant.
Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer/retailer. Part Engine Air Cleaner/Filter 2.4L L4 and 3.6L V6 Engines 3.5L V6 Engine 3.9L V6 Engine Engine Oil Filter 2.4L L4 Engine 3.5L V6, 3.9L V6 Engines 3.6L V6 Engine Spark Plugs 2.4L L4 Engine 3.5L V6, 3.9L V6 Engines 3.6L V6 Engine Wiper Blades Driver Side — 60.0 cm (24.0 in) Passenger Side — 53.0 cm (21.
Engine Drive Belt Routing 3.5L V6 Engine and 3.9L V6 Engine 2.
3.
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts.
Maintenance Record (cont’d) Date Odometer Reading Serviced By Services Performed 7-15
Maintenance Record (cont’d) Date 7-16 Odometer Reading Serviced By Services Performed
Section 8 Customer Assistance Information Customer Assistance and Information ...............8-2 Customer Satisfaction Procedure ......................8-2 Online Owner Center ......................................8-5 Customer Assistance for Text Telephone (TTY) Users ...............................................8-6 Customer Assistance Offices ............................8-6 GM Mobility Reimbursement Program ................8-7 Roadside Assistance Program ..........................
Customer Assistance and Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Pontiac. Normally, any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
STEP THREE — U.S. Owners: Both General Motors and your dealer are committed to making sure you are completely satisfied with your new vehicle. However, if you continue to remain unsatisfied after following the procedure outlined in Steps One and Two, you can file with the BBB Auto Line Program to enforce your rights.
STEP THREE — Canadian Owners: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps One and Two, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/Arbitration Program. General Motors of Canada Limited has committed to binding arbitration of owner disputes involving factory-related vehicle service claims.
Online Owner Center My GM Canada (Canada) — www.gm.ca Online Owner Center (U.S.) — www.gmownercenter.com/pontiac My GM Canada is a password-protected section of www.gm.ca where you can save information on GM vehicles, get personalized offers, and use handy tools and forms with greater ease. Information and services customized for your specific vehicle — all in one convenient place.
Customer Assistance for Text Telephone (TTY) Users To assist customers who are deaf, hard of hearing, or speech-impaired and who use Text Telephones (TTYs), Pontiac has TTY equipment available at its Customer Assistance Center. Any TTY user in the U.S. can communicate with Pontiac by dialing: 1-800-833-PONT (7668). (TTY users in Canada can dial 1-800-263-3830.) Customer Assistance Offices Pontiac encourages customers to call the toll-free number for assistance.
GM Mobility Reimbursement Program Roadside Assistance Program For U.S. purchased vehicles, call 1-800-ROADSIDE (762-3743); (Text telephone (TTY): 1-888-889-2438). For Canadian purchased vehicles, call 1-800-268-6800. Service is available 24 hours a day, 365 days a year.
Coverage Services are provided up to 5 years/100,000 miles (160 000 km), whichever comes first. In the U.S., anyone driving the vehicle is covered. In Canada, a person driving the vehicle without permission from the owner is not covered. Roadside Assistance is not a part of the New Vehicle Limited Warranty. Pontiac and General Motors of Canada Limited reserve the right to make any changes or discontinue the Roadside Assistance program at any time without notification.
Services Not Included in Roadside Assistance • Impound towing caused by violation of any laws. • Legal fines. • Mounting, dismounting or changing of snow tires, chains, or other traction devices. • Towing or services for vehicles driven on a non-public road or highway. Services Specific to Canadian Purchased Vehicles • Fuel delivery: Reimbursement is approximately $5 Canadian. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service.
Scheduling Service Appointments When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer/retailer can help minimize your inconvenience. If your vehicle cannot be scheduled into the service department immediately, keep driving it until it can be scheduled for service, unless, of course, the problem is safety-related.
In addition, for U.S. customers, should you arrange transportation through a friend or relative, limited reimbursement for reasonable fuel expenses may be available. Claim amounts should reflect actual costs and be supported by original receipts. See your dealer for information regarding the allowance amounts for reimbursement of fuel or other transportation costs.
Collision Parts Repair Facility Genuine GM Collision parts are new parts made with the same materials and construction methods as the parts with which your vehicle was originally built. Genuine GM Collision parts are your best choice to ensure that your vehicle’s designed appearance, durability, and safety are preserved. The use of Genuine GM parts can help maintain your GM New Vehicle Warranty.
If a Crash Occurs Here is what to do if you are involved in a crash. • Check to make sure that you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured. • If there has been an injury, call emergency services for help. Do not leave the scene of a crash until all matters have been taken care of. Move your vehicle only if its position puts you in danger or you are instructed to move it by a police officer.
Managing the Vehicle Damage Repair Process Reporting Safety Defects In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there. Specify to the facility that any required replacement collision parts be original equipment parts, either new Genuine GM parts or recycled original GM parts.
Reporting Safety Defects to the Canadian Government Service Publications Ordering Information If you live in Canada, and you believe that your vehicle has a safety defect, notify Transport Canada immediately, in addition to notifying General Motors of Canada Limited.
Current and Past Model Order Forms Technical Service Bulletins and Manuals are available for current and past model GM vehicles. To request an order form, specify year and model name of the vehicle. ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc. on the World Wide Web at: helminc.com Or you can write to: Helm, Incorporated P.O.
Event Data Recorders This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
OnStar® Radio Frequency Statement If the vehicle has OnStar and you subscribe to the OnStar services, please refer to the OnStar Terms and Conditions for information on data collection and use. This vehicle has systems that operate on a radio frequency that comply with Part 15 of the Federal Communications Commission (FCC) Rules and with RSS-210/211 of Industry and Science Canada.
A Accessories and Modifications ............................ 6-4 Accessory Power ............................................ 3-21 Accessory Power Outlets ................................. 4-15 Adding Washer Fluid ....................................... 6-38 Additional Factors Affecting System Operation ..... 2-71 Additional Program Information ......................... 8-11 Additional Required Services .............................. 7-4 Additives, Fuel .................................................
Audio System ......................................... 4-53, 4-72 Audio Steering Wheel Controls ........................................ 4-82 Radio Reception .......................................... 4-83 Setting the Clock ......................................... 4-53 Theft-Deterrent Feature ................................ 4-81 XM™ Satellite Radio Antenna System ............ 4-84 Audio System(s) ............................................. 4-54 Automatic Climate Control System .....................
C Calibration ..................................................... 3-35 California Perchlorate Materials Requirements ................. 6-5 Warning ....................................................... 6-5 California Fuel .................................................. 6-7 Call Waiting ................................................... 4-78 Calling for Assistance ........................................ 8-7 Canada — Customer Assistance ......................... 8-6 Canadian Owners ...................
Cleaning (cont.) Underbody Maintenance ............................. 6-113 Washing Your Vehicle ................................. 6-110 Weatherstrips ............................................ 6-110 Windshield and Wiper Blades ...................... 6-112 Clearing the System ........................................ 4-81 Climate Control System ................................... 4-16 Outlet Adjustment ........................................ 4-24 Climate Control Systems Automatic ..........................
Delayed Locking ............................................... 3-9 Deleting Name Tags ........................................ 4-76 Dinghy Towing From the Front .......................... 5-24 Dinghy Towing From the Rear .......................... 5-25 Disarming the System ..................................... 3-17 Disc, MP3 ...................................................... 4-63 Doing Your Own Service Work ........................... 6-5 Dolly Towing From the Front ............................
Electrical System (cont.) Electronic Immobilizer PASS-Key® III+ ........................................... 3-18 Electronic Immobilizer Operation PASS-Key® III+ ........................................... 3-18 Electronic Stability Control ................................. 5-5 Electronic Stability Control Indicator/Warning OFF Light ................................................... 4-32 Emergency Trunk Release Handle ..................... 3-12 Emissions Inspection and Maintenance Programs .................
Flash-to-Pass ................................................... 4-5 Flat Tire ........................................................ 6-81 Flat Tire, Changing ......................................... 6-90 Flat Tire, Storing ............................................. 6-99 Fluid Automatic Transmission ........................ 6-27, 6-28 Power Steering ........................................... 6-37 Windshield Washer ...................................... 6-38 FM Stereo ................................
H Halogen Bulbs ................................................ 6-47 Hazard Warning Flashers ................................... 4-3 Head Restraints ............................................... 2-2 Headlamps .................................................... 4-10 Aiming ....................................................... 6-47 Bulb Replacement ....................................... 6-47 Daytime Running Lamps (DRL) ..................... 4-11 Delayed .................................................
If the On Indicator is Lit for a Child Restraint ...... 2-69 Ignition Positions ............................................. 3-20 Ignition Transmission Lock Check ....................... 7-9 Infants and Young Children, Restraints ............... 2-39 Inflation - Tire Pressure ................................... 6-64 Information Modes .......................................... 4-40 Instrument Panel Brightness .................................................. 4-13 Cluster ...................................
Lights (cont.) High/Low Beam Changer ................................ 4-5 Low Fuel Warning ....................................... 4-39 Oil Pressure ............................................... 4-37 On Reminder .............................................. 4-10 Passenger Airbag Status Indicator .................. 4-29 Safety Belt Reminders .................................. 4-27 Security ..................................................... 4-37 Tire Pressure ............................................
Mirrors Automatic Dimming Rearview ........................ 3-34 Manual Rearview ......................................... 3-34 Outside Convex Mirror ................................. 3-36 Outside Power Mirrors .................................. 3-36 MP3 ............................................................. 4-63 Muting a Call ................................................. 4-79 My GM Canada (Canada) — www.gm.ca ............. 8-5 N Net, Convenience ...........................................
Parking Brake and Automatic Transmission P (Park) Mechanism Check .............................. 7-9 Parking on Hills .............................................. 5-32 Passenger Airbag Status Indicator ..................... 4-29 Passenger Safety Belt Reminder Light ............... 4-27 Passenger Sensing System .............................. 2-67 Passing ................................................. 5-10, 5-31 PASS-Key® III+ Electronic Immobilizer ...............
Radios Reception ................................................... 4-83 Setting the Clock ......................................... 4-53 Theft-Deterrent ............................................ 4-81 Raising the Retractable Hardtop ........................ 3-41 Reading Lamps .............................................. 4-14 Rear Door Security Locks ................................ 3-10 Rear Safety Belt Comfort Guides (Sedan and Coupe Only) ...............................................
Safety Belts (cont.) Lap-Shoulder Belt ........................................ 2-28 Reminders .................................................. 4-27 Safety Belts Are for Everyone ....................... 2-14 Use During Pregnancy ................................. 2-35 Safety Chains ................................................. 5-30 Safety Defects Reporting Canadian Government .................................. 8-15 General Motors ........................................... 8-15 U.S. Government ........
Spare Tire Compact ................................................... 6-106 Installing .................................................... 6-93 Removing ................................................... 6-91 Storing ....................................................... 6-99 Specifications and Capacities .......................... 6-125 Speedometer .................................................. 4-26 Split Bench Seat (60/40) ..................................
Tire and Loading Information Label .................... 5-19 Tire Sealant ................................................... 6-84 Tires ............................................................. 6-56 Aluminum Wheels, Cleaning ........................ 6-112 Buying New Tires ........................................ 6-75 Chains ....................................................... 6-81 Changing a Flat Tire .................................... 6-90 Cleaning ................................................
Turn and Lane-Change Signals .......................... 4-4 Turn Signal/Multifunction Lever ........................... 4-4 Turn Signals When Towing a Trailer .................. 5-32 2 (Second)/3 (Third) Gear Start Feature .............. 3-28 U Uniform Tire Quality Grading ............................ 6-78 United States — Customer Assistance ................. 8-6 Used Replacement Wheels .............................. 6-80 Using ABS .......................................................
W Warning Lights, Gages, and Indicators ............... 4-24 Warnings DIC Warnings and Messages ........................ 4-42 Hazard Flashers ............................................ 4-3 Safety and Symbols ......................................... iv Weight of the Trailer ........................................ 5-28 Weight of the Trailer Tongue ............................. 5-29 What Kind of Engine Oil to Use ........................ 6-23 What to Do with Used Oil ................................
