User guide

Parts List
Assembly
A. 1 Spray Head
B. 1 Riser
C. 1 Elbow Connector
D. 1 Inlet Connector
1. Attach Elbow Connector (C) to Inlet Connector (D).
Rotate ring until tight.
2. With parts C and D connected, attach this assembly
to pool inlet by rotating until threads fully engage.
Rotate ring until it makes contact with pool wall and
then tighten for a firm connection.
3. Attach Spray Head (A) to Riser (B).
4. With parts A and B connected, attach this assembly
to previously connected parts (C and D).
1.
2.
3.
4.
pool wallpool wall
pool edge
Height of waterfall can be
adjusted by turning sleeve
on Part D to make opening
larger or smaller.
Note: the smaller the opening,
the higher the waterfall.
pool wall
pool inlet
Rotate
Ring
Rotate
Ring
385-1TC
inlet
P. O. Box 340308
Sacramento, CA 95834-0308
POOL & SPA
WATERFALL FOUNTAIN NO. 54507
ASSEMBLY INSTRUCTIONS
NEED ASSISTANCE?
Call our Consumer Service Line
800-854-1492
See our web page @ http:/www.poolmaster.net
e-mail address:[e-mail]
© POOLMASTER , INC.
3/04