User Guide

5
1. With the headphones OFF, long press the right headsets
“ ” for 5 seconds to enter Bluetooth Pairing Mode, open
the Bluetooth menu on phone and select the headset name
"POP" to connect .
While charging, long press the “volume up” button for 5
seconds until the indicator flashes blue 3 times, the pairing
information of the headset will be cleared (Reset).
When a phone call comes, the headset sends out a beep, or
ringtone. Short press the “ ” once to answer the call, or
just answer normally from your phone.
When there is an incoming call, long press “ ” for 1 second.
During phone call, short click the “ ”once
or use the key on the phone to hang up the call.
When on a call, double press “ ”
Hang Up
Gently push the earbud into your ear and adjust for a comfortable fit.
Earbuds should fit snug in the ear for best sound quality.
To change ear bud sizes, simply pull earbud from headphones and
replace with desired size. Twist new earbud onto headphone, may
require rotation and applied pressure.
Slide into ear as pictured and wrap lock-bar behind the earlobe.
Fitting and Wiring
charging
Charge the Headphones with any micro-usb cable (included). Plug
cable into USB port for charging. The indicator will glow red when
it is charging, and turn blue when the battery is full.
MICRO USB
When playing music , long press Vol+/- for 1 second
When playing music, short press Vol+/- once
Bluetooth version: V4.1 Chipse: CSR
Charging Time: 1-2 hours Range: 30ft Range / 10m
Standby Time: 240 hrs Charging Voltage：DC 5V
Operating Time: Up to 8 hours
Bluetooth protocols： HFP, HSP, A2DP, AVRCP
Notes: Playtime varies according to volume level and audio
content
V4.1 Bluetooth version, compatible with over
99% of mobile phones and tablets.
Please do not return to Amazon, if you have any questions or need
help with installation please contact us at
[e-mail] We will happily answer your email and
take you thru a step by step installation.
Warranty Information: Pop Design Products warrants to the original
purchaser of this product that for a period of one (1) year from the
date of purchase from Amazon, the product shall be free of defects in
materials or workmanship, and will repair or replace, at its sole
option, any defective product at no charge.
In the event Pop Design Products chooses to replace the product,
such replacement product may be a different model than the one
originally purchased, but will be equal or better model. This warranty
shall not cover any damage arising from improper use of the product,
accident, tampering, negligence, or product abuse. This warranty
does not cover damages caused by alteration of parts, removal of
parts tampering or disassembling. This warrtanty does not cover
damages caused by neglect or improper use.
Q、I have established connection with my smartphone, but I am not
hearing any sound?
A、Please make sure that you turn up the volume of both devices.
Some smartphones require you to setup the bluetooth headset as an
audio output device before sound is trasmitted. Please see your
smartphone instructions for details. If you are using a music player or
other bluetooth device, please make sure it supports A2DP stereo
music profile.
Q：Why is the connection unstable and cutting out intermittently?
A：Please make sure your headset is fully charged. Please make sure
there are no objects between the headset and you bluetooth device;
please make sure there is no radio or WIFI interference nearby.
Q：Can I use the headset while it is charging?
A：NO，you cannot use the headset while it is charging.
Q：The headset is not responding no matter what I do.
A：Please try to reset the headset. (see the “reset”section) by
holding down the “volume +” button.
Q：The sound is not very clear/ the caller cannot hear my voice
clearly.
A：Please adjust the volume on you phone and headset. Make sure
the microphone port of the headset is not obstruct and that you are
within range of your smartphone.
1. Before using the headset, please read the manual carefully and
keep it for future referrence.
2. The headset needs to be fully charged prior to your first-time use.
3. If the headset is left unused for over two weeks, please recharge it
for best use.
4. Use only USB chargers made by qualified manufacturers.
5. If the headset cannot be searched by your phone, please check
whether it is in pairing mode ; if left unconnected for extended
periods, the headset will exit pairing mode. Try resetting and
reconnecting with your smartphone from scratch.
1. Never disassemble or modify you headset for any reasons to avoid
any damages and danger.
2. Do not store the headset in extreme temperatures (under 32°F or
over 120°F).
3. Do not use harsh chemicals or strong detergents to clean the
headset.
4. If headset becomes wet, dry it before storage.
waterproof
sports headset
wireless stereo sport headphones
user manual
pop-btip7x
POP
POP
POP
1. Follow the pairing procedure to connect the headset to
Phone 1 and turn off the headset.
2. Longpress “ ”to enter pairing mode again. Activate the
bluetooth function of Phone 2 and search for the headset.
Select “ POP” from the devices list and click it to connect.
POP
POP
POP
POP
POP
When you are already on a call, if there s an incoming call on the
other phone, press “ ” to answer the 2nd call and put the
1st call on hold , you can switch between the two calls by double
pressing MFB.
When playing music, press “ ” once to pause, press again
to resume.
Multiple call handling
Play/Pause
During a call , long press “ ” for 1 second
Transfer voice between headset
and phone
Contact Us
With Any
Questions:
[e-mail]
www.popdesignproducts.com
Questions? [e-mail]
With the headsets off, power them on by long-pressing the
“ ” on both devices simultaneously for 3 seconds till
the indicators glow red and blue for 1 second.
LED
USB