Manualshelf

Product Info

ManualsBrandsPopSockets ManualsElectronicsQi-Certified 15W Wireless Charger
12
VP Creative:
John Kieselhorst
Design Director:
Justin Fuller
Packaging Coordinator:
Natalie Waller
VP Design:
Randy Chiang
Mary LaMacchia
Packaging Engineer:
Christina Holmes
Product Manager:
Tung Wing Ho
Tung Wing Ho
Product Manager:
Alexis Hanczaryk
Alexis Hanczaryk
R
e
v:
A
Studio Artist:
Anh Truong
Date Modified:
10/14/19
PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING PROPRIETARY
AND SHALL NOT BE REPRODUCED, DISCLOSED TO OTHERS, OR USED FOR MANUFACTURING OR ANY
OTHER PURPOSE WITHOUT THE WRITTEN PERMISSION OF POPSOCKETS LLC.
PACKAGING
T
e
TeT
c
h
N
o
te
s:
Substrate:
Paper
Packaging Part:
16-000642
Print Graphic:
15-000510_A
Packaging Engineering:
16-000664_A
M
e
c
h
an
i
c
a
l:
Element:
Double sided foldable insert
Dimensions:
660.0 x 60.0 mm.
Bleed:
none
Safe:
3.5 mm.
Build Scale:
100%
Proof Printed:
100%
Color Mode:
2 SPOTS
Resolution:
300 dpi
S
p
p
o
t
C
o
lo
r
s:
Cut
PMS 296C
PMS 801 Neon
C
o
a
t
i
n
g:
g:
15-000510_A-PopPower-QuickStartGuide — Two Sided Foldable Insert
READ THE FOLLOWING SAFETY PRECAUTIONS BEFORE USING YOUR WIRELESS CHARGER
1 Foreign objects: Do not place metal containing items, such as keys, magnets, coins, batteries, or jewelry, between the wireless charger and a mobile device. Detach
from the mobile device PopSockets PopTops containing metal (including, but not limited to, Enamel, Aluminum, Backspin, Pressed Flower, Glitter, and metal rimmed
premium PopTops). These objects will prevent the wireless charger from operating and may overheat. Materials with magnetic strips or radio-frequency identifi cation
(RFID), such as credit cards, entry keycards, passports, and driver’s licenses, should not be placed between the wireless charger and a mobile device. These items
may be damaged by the magnetic fi eld generated by the wireless charger. Accessory wallets, including the PopSockets PopWallet, must be detached from mobile
devices prior to charging. Cosmetics and wax products, such as makeup, lip balm, and candles, should not be placed on the wireless charger during or after charging.
Normal charging temperatures may cause these materials to melt.
2 Environment: Use indoors, out of direct sunlight, in a dry and ventilated location. It is recommended to use your wireless charger on a hard, fl at surface such as a
countertop, table, or desk. Do not place the wireless charger or power adapter under blankets, pillows, or other insulating materials while connected to power. This
may cause the device to overheat. Do not use the wireless charger in an explosive environment where high concentrations of fl ammable dust, powder, gas, vapors,
particles, or liquid droplets are in the air.
3 Water and conductive materials: Do not expose the wireless charger or power adapter to moisture or conductive materials, such as liquids, metal dust, or pencil
shavings. Keep power ports free of foreign metal objects. Do not use the wireless charger or power adapter near sinks, showers, or bathtubs, and do not operate with
wet hands. Exposure to water or conductive materials may result in electric shock, injury, fi re, or damage to the device or other property.
4 Handling: Your wireless charger has internal components that may be damaged if the device or its accessories are roughly handled, compressed, punctured, subjected
to high impacts, or exposed to liquids. Handle with care. Keep out of reach of small children and animals. This product is intended for adult use only. Handling by small
children or animals may cause device damage or personal injury. If you experience problems with your wireless charger or suspect damage, immediately discontinue
product use. Misuse can cause electric shock.
5 Power adapter: Your wireless charger is intended to be used with the original high-wattage power adapter (19VDC 1.5A) you received with the product. Failure to use
the PopSockets power adapter may result in a safety hazard or damage to the device. For safe operation, plug the power adapter into a nearby power outlet that is
easily unplugged. Immediately discontinue product use if there is damage to the power adapter prongs or barrel connector, if the cord becomes cut, deformed, or
frayed, if the power adapter has been dropped or damaged, or if liquid is spilled or otherwise exposed to the power adapter.
6 Modifi cation: Do not disassemble the wireless charger or power adapter. Do not modify or attempt to re-purpose the device. Do not service the device or replace any
components.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(
1
)
This device may not cause harmful interference.
(
2
)
This device must accept any interference received, including interference that may cause undesirable operation.
Warning: Any changes or modifi cation to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
INNOVATION, SCIENCE, AND ECONOMIC DEVELOPMENT CANADA CAUTION STATEMENT:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(
1
)
This device may not cause interference, and
(
2
)
This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur / récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(
1
)
L’appareil ne doit pas produire de brouillage, et
(
2
)
L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
DECLARATION OF CONFORMITY
Hereby, PopSockets, LLC declares that product type PW15A is in compliance with the essential requirements and the other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.popsockets.com/declaration-conformity
Transmit Frequency: Wireless Charging (217kHz); Maximum RF Output Power: 41.8 dBm
QI WIRELESS RECEIVER COMPATIBILITY
This charger is not suitable for charging Qi receivers smaller than 50 mm across. However, as this charger is capable of properly charging any Qi device, to charge
smaller Qi devices, the central cavity should be covered to create a fl at charging surface.
READ THE FOLLOWING SAFETY PRECAUTIONS BEFORE USING YOUR WIRELESS CHARGER
1 Foreign objects: Do not place metal containing items, such as keys, magnets, coins, batteries, or jewelry, between the wireless charger and a mobile device. Detach
from the mobile device PopSockets PopTops containing metal (including, but not limited to, Enamel, Aluminum, Backspin, Pressed Flower, Glitter, and metal rimmed
premium PopTops). These objects will prevent the wireless charger from operating and may overheat. Materials with magnetic strips or radio-frequency identifi cation
(RFID), such as credit cards, entry keycards, passports, and driver’s licenses, should not be placed between the wireless charger and a mobile device. These items
may be damaged by the magnetic fi eld generated by the wireless charger. Accessory wallets, including the PopSockets PopWallet, must be detached from mobile
devices prior to charging. Cosmetics and wax products, such as makeup, lip balm, and candles, should not be placed on the wireless charger during or after charging.
Normal charging temperatures may cause these materials to melt.
2 Environment: Use indoors, out of direct sunlight, in a dry and ventilated location. It is recommended to use your wireless charger on a hard, fl at surface such as a
countertop, table, or desk. Do not place the wireless charger or power adapter under blankets, pillows, or other insulating materials while connected to power. This
may cause the device to overheat. Do not use the wireless charger in an explosive environment where high concentrations of fl ammable dust, powder, gas, vapors,
particles, or liquid droplets are in the air.
3 Water and conductive materials: Do not expose the wireless charger or power adapter to moisture or conductive materials, such as liquids, metal dust, or pencil
shavings. Keep power ports free of foreign metal objects. Do not use the wireless charger or power adapter near sinks, showers, or bathtubs, and do not operate with
wet hands. Exposure to water or conductive materials may result in electric shock, injury, fi re, or damage to the device or other property.
4 Handling: Your wireless charger has internal components that may be damaged if the device or its accessories are roughly handled, compressed, punctured, subjected
to high impacts, or exposed to liquids. Handle with care. Keep out of reach of small children and animals. This product is intended for adult use only. Handling by small
children or animals may cause device damage or personal injury. If you experience problems with your wireless charger or suspect damage, immediately discontinue
product use. Misuse can cause electric shock.
5 Power adapter: Your wireless charger is intended to be used with the original high-wattage power adapter (19VDC 1.5A) you received with the product. Failure to use
the PopSockets power adapter may result in a safety hazard or damage to the device. For safe operation, plug the power adapter into a nearby power outlet that is
easily unplugged. Immediately discontinue product use if there is damage to the power adapter prongs or barrel connector, if the cord becomes cut, deformed, or
frayed, if the power adapter has been dropped or damaged, or if liquid is spilled or otherwise exposed to the power adapter.
6 Modifi cation: Do not disassemble the wireless charger or power adapter. Do not modify or attempt to re-purpose the device. Do not service the device or replace any
components.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(
1
)
This device may not cause harmful interference.
(
2
)
This device must accept any interference received, including interference that may cause undesirable operation.
Warning: Any changes or modifi cation to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
INNOVATION, SCIENCE, AND ECONOMIC DEVELOPMENT CANADA CAUTION STATEMENT:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(
1
)
This device may not cause interference, and
(
2
)
This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur / récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(
1
)
L’appareil ne doit pas produire de brouillage, et
(
2
)
L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
DECLARATION OF CONFORMITY
Hereby, PopSockets, LLC declares that product type PW15A is in compliance with the essential requirements and the other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.popsockets.com/declaration-conformity
Transmit Frequency: Wireless Charging (217kHz); Maximum RF Output Power: 41.8 dBm
QI WIRELESS RECEIVER COMPATIBILITY
This charger is not suitable for charging Qi receivers smaller than 50 mm across. However, as this charger is capable of properly charging any Qi device, to charge
smaller Qi devices, the central cavity should be covered to create a fl at charging surface.
EN
FR