User manual V3
Page. 2 Contents: Page 3. Brand Name and Model 4. How to operate 5. Install App 6. How to scan 7. Specification 8. Notice 9.
Page.
Page. 4 How to operate: 1. Scan the QR code on the front of the PopTag using an Apple Iphone X camera. Get the code: Example below. 2. Add a description for the PopTag. For example “Tag for car parts” and add the description into a book.
Page. 5 Install an Apple Bluetooth Low Energy App called NRF Connect. Scan for the PopTag10.
Page. 6 Confirm the PopTag information in the scan is the same as the code written down previously.
Page. 7 Operating temperature: -15oC to +65 oC Ingress Protection: IP67 The PopTag transmits its data via Bluetooth Low Energy for example “D8 BF 4C 00 00 16” every 5 to 15 seconds continuously.
Page. 8 Notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page.
