Quick Start Guide

31
3.2 Setting up the laptop
i
ADVICE
Do not open the display farther than  ° and/or to a noticeable resistance,
otherwise the device may be damaged.
You can now customize the settings of your laptop. You can change any of
the settings and preferences you configure now in the future.
For more information, see "Setting Up and Customizing the laptop" in the
user’s manual.
. Press the on/off button for approximately two to three seconds to
switch on the laptop.
. Windows now boots up and guides you through the setup process.
Go step-by-step through the setup assistant to configure your laptop.
i
ADVICE
During the setup process, you will be prompted to sign in with your
Microsoft account. If you do not yet have a Microsoft account, please set
one up at this point.
. Once you have fully completed the setup process, your device will be
configured according to the settings you made and is ready for use.
i
ADVICE
This process may take a while. Be patient and do not turn off the device
until the configuration process is complete.
. Once your device is ready for use after the setup process is complete,
you will be shown the lock screen. Drag the lock screen on the touch
display upwards with your fingertip or left-click. on the touchpad to
unlock the screen.
i
ADVICE
If your device is password-protected, you must then enter the password.
For more information on securing your device, see "Protecting Personal Data"
in the user’s manual.
QG-PD-V1-20-DE-US_EN-190924.indd 31 24.09.2019 15:40:34