User Manual
Table of Contents Table of Contents 02 Introduction to your Dash Cam 03 Precautions 04 Product Warnings & Notices 05 FCC Conformity Information 06 Product Information 07 Package Contents & Product Features 08 Camera Parts & Controls 09 MyNextbase Connect™ 10 First Time Use – Dash Cam Screens 11 MyNextbase Connect™ : Uber Account 12 In Vehicle Installation 13 - 16 Positioning Your Dash Cam 17 Mount Attachment 18 Menus & Settings 19 - 20 Emergency SOS 21 - 23 MyNextbase Connect
Introduction to your Dash Cam This range of Nextbase™ Dash Cams has been designed specifically with ease of use in mind; it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Please check the firmware version of the Dash Cam, the version can be found in the Setup menu under System Info. The latest versions are available to download from our website, where you can download and update when necessary. www.nextbase.
Precautions Failure to heed the following precautions could result in personal injury or property damage, or negatively impact the device functionality. Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. Battery Precaution WARNING: CAUTION: LCD: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire.
Product Warnings Notices Failure to heed the following warnings could result in an accident or collision resulting in death or serious injury. G Sensor Notice Distraction Warning This device is intended to enhance the situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. DO NOT seek to access the information stored on the device or change the device settings whilst driving.
FCC Statement FCC - Supplier’s Declaration of Conformity Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Product Specification Declaration of Conformity Declaration of Conformity We, Portable Multimedia Limited. Dorna House Two. 52 Guildford Road, West End, Surrey. GU24 9PW United Kingdom NBDVR323X Power Requirements 5V / 1.5A Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 32mm / 2A Output: 5Vdc Hardwire Kit also available to purchase for a hidden, permanent power supply.
Package Contents Product Features Please check the contents of you Nextbase Dash Cam product. Thank you for purchasing this Nextbase™ Dash Cam product, in this section we will outline some of the features available with this dash cam. HD Recording Capability 1080p HD recording at 60 fps, to record the road ahead.
Camera Parts and Controls 1 See below to identify the parts and controls of your Dash Cam 3 2 4 5 6 2 Speaker Integrated speaker for audio playback 3 Camera Lens Wide angle 140º 4 Power Button Press and hold for 2 seconds to turn the Dash Cam On/Off 8 7 4 1 5 6 9 Dust Cover Mounting point located under the dust cover (Regulation markings can also be found underneath the dust cover) LEDs Top: Blue - The Blue LED will be on while the Dash Cam is charging.
MyNextbase Connect The Nextbase 323GW will only work when connected to the MyNextbase Connect™ app with a valid Uber driver login. MyNextbase Connect is an easy-to-use app that will enable you to effortlessly manage and share your videos. In addition to this, there are features on the Dash Cam that can only be used in conjunction with the app; for example, the Emergency SOS function. Use the QR Codes below to download MyNextbase Connect App from the Apple App Store® or the Google Play Store®.
First Time Use - Dash Cam Screens This menu is used to set your preferred Language, Country (inc. Time Zone) and Speed Units. This menu will appear when: 1. The Dash Cam is first turned on. 2. There has been a Firmware Update applied to the Dash Cam and ‘Keep User Settings’ has been set to OFF. If It is set to ON, your Dash Cam will start normally, with your settings intact. 3. After the Dash Cam’s settings have been reset, by using the ‘Default Settings’ option in the Setup Menu.
MyNextbase Connect: Uber Account (Work In Progress) First Time Use After connecting your mobile device to the Dash Cam, you’ll be asked to connect your Uber account. Your Uber Information More information about your Uber account and pending Video Requests can be found in the Uber section on the homescreen. Enter your Uber account details and allow permissions. Uber Video Requests (work in progress) If an incident has been reported, you may be asked to send your footage to Uber for review. Finish Setup.
In Vehicle Installation Please follow the instruction below for the first-time installation of the Dash Cam. For day to day use, simply remove the camera from the mount as required. 1 Insert MicroSD Card Insert a suitable MicroSD card (U3) in to the Dash Cam, taking care that the gold contacts are facing towards the LCD screen side of the Dash Cam. Push the memory card until it clicks into place. 1 Note: - Use the edge of a small coin (or similar object) to push the memory card in place if required.
In Vehicle Installation (cont.) 4 Connect car power cable Connect the supplied car power cable (1) to the Dash Cam Mount’s USB port. Do NOT connect the power cable to the USB port on the Dash Cam. 4 5 Plug the power cable into the 12-24Vdc outlet of your vehicle The Dash Cam will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on.
In Vehicle Installation (cont.) 6 6 Remove the adhesive cover layer Peel back the red cover layer to expose the adhesive surface, ready to mount on your windscreen. 7 7 Straighten the Dash Cam Ensure that the Dash Cam is horizontal and faces straight out of the windscreen. Ensure that objects on the Dash Cam display appear level, and adjust as required.
MODE MENU MODE MENU In Vehicle Installation (cont.) 9 Adjusting the Dash Cam With the mount attached to the windscreen, ensure that objects on the Dash Cam display are level and adjust as required. Ensure that the road ahead is at the centre of the image, in the central third of the display. If too much of the sky is visible it may risk underexposing details on the road; ensure that the road ahead is clearly visible on the Dash Cam display.
Positioning Your Dash Cam Please read and follow the notes below for the safe operation of your Dash Cam within your vehicle. Notes On Positioning Your Dash Cam - Do NOT mount the Dash Cam in front of the driver, as depicted by the red area in the illustration to the left of this page. - When installing the Dash Cam in a vehicle, always place the device securely against the windscreen and where possible conceal the power cable under trim.
Mount Attachment To attach the mount, align the pins on the mount with the holes on the adhesive attachment and slide firmly to the right until you hear the pieces click into place. To remove the top, simply do the reverse, slide it to the left until you can lift it off of the mounting pins. Ensure the windshield is free of grease and dirt before mounting; if necessary, clean with a warm, clean cloth. Ensure that the Mount and Dash Cam do not obstruct the driver’s view.
Menus Video Settings Press the ‘Menu’ button to enter the Dash Cam’s ‘Video Menu’ system. 1 Exposure Adjust the exposure level for different lighting conditions. Options: Values range from -6 to +6 Default: 0 2 Audio Turn On/Off the microphone for video recording. Options: On and Off Default: On 3 Number Plate Input your vehicle’s number plate to add a number plate stamp to your recordings. Default: Off 4 G Sensor Turn off or adjust the sensitivity of the internal G Sensor.
Setup Settings 9 Screen Saver Turn on the screen saver function to shut down the screen after a chosen period of inactivity. You can also choose for the screensaver to show your current speed. Options: On and Off and Speed Display Default: Off 16 Speed Units Choose between MPH and KMH Options: MPH and KMH Default: MPH 17 Device Sounds Turn On/Off the beep that sounds when the touch panel is pressed. Start up sound is NOT muted.
In the event of an incident Driver Assistance - Emergency SOS Driver Assistance 24 In order for this function to work, you must have the ‘MyNextbase Connect™’ app installed on your smart-phone (or similar device), have an internet connection, and have Bluetooth turned on. ‘MyNexbase Connect™’ can be downloaded from the Apple App Store® or Google Play®. Use the QR codes below, or search for ‘MyNextbase Connect™’ in the relevant store.
Emergency SOS (cont.) The below diagram illustrates how the user’s smart-phone and Dash Cam operate in the event of an incident.
Emergency SOS Frequently Asked Questions The below points are there to answer any further questions you might have about the Emergency SOS system. Question Response If I crash, will you notify the Police? No. The MyNextbase Connect™ app automatically sends your location, medical and vehicle details to the nearest Ambulance or Emergency Response Service only.
MyNextbase Connect™ MyNextbase Setup Phone 25 Paired Devices MyNextbase In order for this function to work, you must have MyNextbase Connect™ installed on your smart-phone (or similar device), have an internet connection, and have Bluetooth turned on. Within this menu, you will be able to manage your connected devices. You will be able to connect and set up new devices (as seen in your Dash Cam’s First Time Use), and manage devices which are already connected.
Video Mode Rear Camera Picture in Picture Your Rear Camera’s cuuurent live view. Tap to expand. tap again to minimise. The key below explains the various information displayed on the screen when your Dash Cam is in Video mode, some icons will only be displayed once the relevant function has been selected within the Video menu, as described below. 1 2 Not Recording 3 4 Recording 5 6 7 8 5 1 Settings Select to open the Dash Cam’s Menu system.
Rear View Display and Screenshots When the Dash Cam is turned on with a Rear View Camera connected, you will see a Picture in Picture (PiP) to the centre left of the screen, showing the attached camera’s view. Tapping on the PiP window opens the Rear View in full screen. Tapping again minimises the Rear View back down to PiP. Screen Capture If a Rear Cam is attached, touch the centre of the Front Facing view (yellow dotted area, left) to take a photo.
Playback Mode - Video The key below explains the various information displayed on the screen when your Dash Cam is in Playback Mode (Protected/Unprotected Video). Preview Mode 1 4 3 2 5 7 6 8 Video Playback 12 10 11 Video Paused 1 Protect Icon If present, the file is protected; if not present, the file is unprotected.
Playback Mode - Video Editing The key below explains the various information displayed on the screen when your Dash Cam is in Playback Mode (Protected/Unprotected Video). Edit Mode 1a 1b 3 2b Trim Start (green) Press to place Start Indicator on the timeline. 1b Trim Start Indicator Start point of your new file. 2a Trim End (Red) Press to place End Indicator on the timeline. 2b Trim End Indicator End point of your new file.
Playback Mode - Protect & Delete The key below explains the various information displayed on the screen when you are protecting and deleting files. Preview Mode - Protect and Delete 1 2 1 Protect Button Press this button to protect/unprotect the file you’re viewing. Delete Button Delete the current video file. If you try to delete a protected file you will see a pop-up telling you to unprotect the file.
MyNextbase Player - Playback Software 4 View, edit, and share your footage on your computer with the new easy to use free PC/Mac software. The software also allows you to view in-depth analysis of your journeys, including information on dates and times, speed, GPS location, and more. Connect your Dash Cam via USB (see ‘PC Connection’, page 38) or use an SD card reader (integrated or external).
MyNextbase Player - Editing Videos To use MyNextbase Player™ to edit your recorded files, you need to ensure that the file you wish to edit is currently playing in the Playback Window. You can do this by double clicking the file as it appears in the File List window. When the file is playing, click on the ‘Edit’ button to begin the 6 step editing process. 1. Join Videos (Optional) The first step allows you to join multiple videos together.
MyNextbase Cloud™ MyNextbase Cloud™ is our free online video sharing service where you can safely and securely store your Dash Cam files. Upload your file to the Nextbase™ Server using the ‘Share Video’ function on either MyNextbase Player™, or the MyNextbase Connect™ app. Please note finished uploading you will be given a secure link to watch your video online and/or download it to your computer/device. This link can be shared with others (including your insurer) to view/download the video.
PC Connection Firmware Update Information Use the supplied USB cable to connect the Dash Cam directly to your PC via the socket; do NOT connect the USB cable to the Powered Mount. Once connected the Dash Cam will turn on with three options available; ‘Access Files’, ‘Power On’, and ‘Update Firmware’, as described below. Firmware Update information can be found on the next page. Access Files (Windows) When this option is selected, the Dash Cam will function as a card reader for your PC.
Nextbase™ SD Cards For best results, we recommend using our Nextbase™ branded SD cards with your Dash Cam, available to purchase online from nextbase.com, or your nearest retailer. 32GB Approx 4 hours footage. 64GB Approx 8 hours footage. 128GB Approx 16 hours footage. We recommend formatting your SD Card every 2 weeks to ensure that there is enough space to record and store new footage. When formatting, protected files WILL be deleted.
Frequently Asked Questions Problem Solution Video Image is blurred. Remove the protective lens cover, clean the lens, make sure the windshield is clean and clear of grease, dirt, and debris. Ensure that the Polarising Filter has been set properly if you have one attached. I cannot insert the MicroSD card. MicroSD cards are very small and require delicate use. Align the card with the diagram shown upon the Dash Cam and insert the card until you feel a slight spring resistance.
CE Mark Information (Conformité Europénne) Software License Agreement The CE (Conformité Européenne) mark is a symbol (below) printed on products to indicates it’s conformity with health, safety, and environmental protection standards for products sold within Europe. It is used on many products across many industries (for example, SD cards) as a mark of compliance with European standards. By using the device, you agree to be bound by the terms and conditions of the following software licence agreement.
Warranty Limited Warranty This limited warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state (or by country or province). Nextbase™ does not exclude, limit or suspend other legal rights you may have under the laws of your state (or country or province). For a full understanding of your rights you should consult the laws of your state, country or province. Nextbase Liability extends to the cost of the Dash Cam alone.
More Nextbase™ Products Dash Cams Eyes on the Road Nextbase™ Services and Software Nextbase™ offers a wide range of Dash Cams to best suit your driving needs. For our full range of Dash Cam’s at www.nextbase.com 622 GW Accessories Ready for the Drive Everything you might need for video storage, Dash Cam protection, and more. MyNextbase.
Dash Cam Functions Overview 622GW Main Resolution 720P @ 30 FPS 1080P @ 30 FPS 1080P @ 60 FPS 1440P @ 30 FPS 1440P @ 30 FPS 4K @ 30 FPS Alexa Built-in Alexa Built-in Alexa Built-in Screen Viewing Angle GPS Wi-Fi Bluetooth Polarising Filter Alexa Built-in Parking Mode Nextbase Emergency Response Nextbase Module Cam Compatible (Cabin View, Rear Facing, Night Vision) Yes - Front 4K/1440p/1080p Rear - 1080p Nextbase Cloud™ Storage MyNextbase Player™ MyNextbase Connect™ 39
NBDVR323GW-ENG-R1 40