User's Manual

19
The default settings have been carefully selected to allow you to use your Dash Cam
without the need to change any settings. However, should you wish to change a setting then
please see below:
- Use the touch screen to select a settings submenu
(Video Settings, Setup, Driver Assistance, Communications)
- Once in the submenu, use the touchscreen to select which function to change.
- When swiping through the menu pages, swipe from the middle of the screen, to avoid accidentally
selecting a submenu/function.
Notes:
- Menus are not accessible whilst the Dash Cam is recording.
- Within the Setup Menu there is a ‘Default Settings’ option to allow you to reset the Dash Cam
to the factory defaults, if required.
Menu Tree:
See below for the settings to be found under each submenu:
Video Settings
Video Settings:
- Exposure
- Audio
- Number Plate
- G Sensor
- Time Stamp
- Speed Stamp
- GPS Stamp
- Model Stamp
Setup:
- Screen Saver
- Alerts
- Parking Mode
- Language
- Country
- Time Zone / DST
- Time & Date
- Speed Units
- Device Sounds
- Screen Dimming
- Auto Power Off
- Keep User Settings
- System Info
- Format SD Card
- Default Settings
Driver Assistance:
- Emergency SOS
MyNextbase:
- Setup Phone
- Paired Devices
Press the ‘Menu’ button to enter the Dash Cam’s ‘Video Menu’ system.
Menus
MyNextbase
Exposure
Adjust the exposure level for different lighting conditions.
Options: Values range from -6 to +6
Default: 0
Audio
Turn On/Off the microphone for video recording.
Options: On and Off
Default: On
Number Plate
Input your vehicle’s number plate to add a number plate stamp to your recordings.
Default: Off
G Sensor
Turn off or adjust the sensitivity of the internal G Sensor. The G Sensor detects forces
which will protect the current recording in the event of a collision. The higher the
G Sensor sensitivity, the less force will be needed to trigger automatic file protection.
Options: Off, Low, Medium, High
Default: Medium
Time & Date Stamp
Turn On/Off the time and date stamp shown at the
bottom of the screen on recorded files.
Options: On and Off
Default: On
Speed Stamp
Turn On/Off the speed stamp shown on recorded files.
Options: On and Off
Default: On
GPS Stamp
Turn On/Off the GPS stamp shown on recorded files.
Options: On and Off
Default: On
Model Stamp
Turn On/Off the Dash Cam model stamp shown on recorded files.
Options: On and Off
Default: On
1
2
3
4
7
6
5
8