Use and Care Manual
Remove product from packaging Position on level surface
Fill tank or attach water hose
1 2 3
QUICK SETUP
Plug into appropriate outlet
Fill the tank, then turn on the pump switch and the fan
For setup, KUUL
Comfort
TM
evaporative media should
appear wet before starting the fan. Check the water
gauge to monitor water level in tank. The water
adjustment valve on each portable evaporative cooler
is set at max ow. However, ensure the knob is turned
completely to the right before use. Turn to the left to
increase water ow. If entrainment occurs - water is
spitting from the front of the product - use the valve to
decrease the water ow until entrainment ceases.
4
5
Your Portacool portable evaporative cooler is meant to
be used in an open-air environment, such as a patio.
If you plan to use your evaporative cooler in a more
closed environment – such as a garage, sunroom or
barn – you must provide adequate ambient airow to
ensure your evaporative cooler works at its highest
efciency. When using in a semi-closed environment,
be sure to leave a door or window open to allow for the
proper amount of airow.
6
Ensure proper airflow is available