User Manual

20
Anatomy of a PortaFab Building
The solid construction and quality components
found in every PortaFab building are indicated
in this drawing of a 4-wall unit with 3” thick
walls. Most components are interchangeable
with any PortaFab model.
1. 3070 20 Ga. Steel Door -
1 3/4” thick, comes pre-hung in frame;
shown with optional glazing.
2. Cornice Mold - sturdy aluminum
construction, either anodized or
painted; provides handsome
finished appearance.
3. Fixed Window - 1/4” thick tempered
safety glass; comes pre-glazed in
aluminum window frame.
4. Corrugated Steel Dust Cover -
22 ga. ribbed steel is 1 1/2” deep;
painted and cut to length.
5. 2’ x 4’ Light Fixture - includes
4-lamp light fixture with acrylic lens.
(Bulbs not included).
6. Acoustical Lay-in Ceiling -
consists of prepainted metal grid and
lay-in acoustical, noncombustible white
fissured mineral board.
7. Exhaust Fan - powerful exhaust fan
located in ceiling.
8. Air Conditioning Unit - wall-mounted
units provide cool environment for
any size office(available in several BTU
capacities); optional heat available too.
9. Fire & Sound Panels - see pages
22-23 for specifications.
10. Hardboard w/Honeycomb panel -
includes 1/8” vinyl hardboard laminated
to both sides of kraft honeycomb core.
2.
4.
1.
8.
7.
6.
5.
3.
12.
11.
9.
10.
13.
14.
16.
15.
11. Thermal Panel - includes 1/8” vinyl
hardboard laminated to both sides of
polystyrene insulating core.
12. Steel Floor Track - sturdy channel
holds walls securely in place.
13. Corner Post
14. Duplex Receptacle -
can be located
in any wiring stud.
15. Wiring Stud - permits the installation
of electrical service vertically and
accepts standard electrical boxes.
16. Brown Vinyl Base - screw-on type
is easily removable with no exposed
screws or fasteners.