Instruction Manual

ManualsBrandsPortaTree ManualsSports and recreationEliminator 2000 Plus Versions Prior to 3.00

ELIMINATOR 2000 INSTRUCTIONS

Table of Contents

1. PRACTICE

A. “TREE” Key

1. Change Full to Pro Tree

2. Change Tree Speed ( 4 tenths or 5 tenths)

3. Change Rollout Out – Separate Full and Pro Tree

4. Change Preset Time

5. Change Fixed Delay

6. Turn Crossover On / Off

7. Turn Shift Light On / Off

B. “PREF” Key

1. Change Practice Mode – Single User / Dual User

2. Change Reset Mode -- Manual / Auto

3. Turn Random Dial – On / Off

4. Turn Beta Bright Display -- On / Off

5. Turn L.E.D.’s – On / Off

6. Defaults – Reset to Factory Settings

C. “STATS” Key

D. “DIAL” Key

E. “LOG ON” Key

F. “MAIN MENU” Key

G. “DELAY BOX” Keys

H. “RESET” Key

I. “DATE / TIME” Key

J. “STAGE / ENTER” Key

K. “STAGE / ESCAPE” Key

L. “ARROW” Keys

3. TRACK

A. Purpose and How to Use

4. DISPLAY

A. Displays different tree sequences

5. TROUBLESHOOTING

A. Most Common Problems

B. Reinitiate to Factory Settings

C. When to Send to Portatree for Repair

6. BATTERY USE AND CHANGING

A. How to Change and Type to Use

7. WARRANTY

A. Explanation and terms

8. HOLD HARMLESS

A. Using the ELIMINATOR for Test Tracks and Competition Racing

Summary of content (6 pages)

PAGE 1
ELIMINATOR 2000 INSTRUCTIONS Table of Contents 1. PRACTICE A. “TREE” Key 1. Change Full to Pro Tree 2. Change Tree Speed ( 4 tenths or 5 tenths) 3. Change Rollout Out – Separate Full and Pro Tree 4. Change Preset Time 5. Change Fixed Delay 6. Turn Crossover On / Off 7. Turn Shift Light On / Off B. “PREF” Key 1. Change Practice Mode – Single User / Dual User 2. Change Reset Mode -- Manual / Auto 3. Turn Random Dial – On / Off 4. Turn Beta Bright Display -- On / Off 5. Turn L.E.D.’s – On / Off 6.
PAGE 2
PRACTICE MODE If this is your first time using the “ELIMINATOR 2000” this is the place to begin. A rocker switch on the upper left-hand side turns on the ELIMINATOR. On Startup, the Portatree logo appears and each light illuminates on the “ELIMINATOR 2000” in succession faster and faster, and then the Main Menu appears. The display will read “PRACTICE”, “WEATHER” ,”TRACK”, & DISPLAY”.
PAGE 3
reaction time and the “TOP 2 AMBER” lights on the “ELIMINATOR 2000" will illuminate. Depress the external hand switches as quick as you can. The “MIDDLE 2 AMBER” lights will come on next at the Preset Shift 2 Point. Again, depress the hand switch as quickly as possible. Finally the “BOTTOM 2 AMBER” lights come on at the Preset Shift 3 Point. Again, depress the external hand switches as quick as possible. After you have completed the test, the SHIFT LIGHT Reaction Results will be displayed.
PAGE 4
1st Screen -- Number of Wins – Number of Red Lights -- Left & Right Lane 2nd Screen – Best Reaction Time – Average Reaction Time -- Left & Right Lane Note: Average Reaction Time is a running average rd 3 Screen -- Slowest and Fastest Reaction Times – Left & Right Lanes 4th , 5th, 6th, 7th, 8th Screens – History of your results. D. “DIAL” Key At any time when you are in the practice mode at the “STAGE UP” / “STAGE UP” screen, you can depress the “DIAL” Key to set the dial in for both lanes.
PAGE 5
I. “DATE / TIME” Key: This is not functional at this time. J. “STAGE / ENTER” Key: The STAGE / ENTER Key is used to stage up in the right lane, it is used to save and store information, or it is used to step through the different menu items. K. “STAGE / ESCAPE” Key: The STAGE / ESCAPE Key is used to stage up in the left lane, it is used to exit without saving information, or it is used to go back to the practice mode from various menu items. L.
PAGE 6
B) Resetting Factory Settings – You can reset the factory settings by depressing the “PREF” key and then depressing the STAGE/ENTER key until you see DEFAULTS [No]. Use the Up arrow key to change to “Yes” and then depress the STAGE/ENTER Key. This will automatically reset all settings to the original settings set at the factory. C) When to Send the ELIMINATOR to Portatree for Repair . If your unit does not power up it will definitely have to come back for repair.