ESPAÑOL: PÁGINA 15 FRANÇAISE : PAGE 29 Instruction manual Double Insulated Portable Electric Drills MODEL 2610 3/8" Keyless Drill MODEL 2611 3/8" Drill MODEL 2614 1/2" Keyless Drill MODEL 2615 1/2" Drill To learn more about Porter-Cable visit our website at: http://www.porter-cable.com IMPORTANT Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations. The Model and Serial No.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 GENERAL SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ADDITIONAL SPECIFIC SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . .6 CARTON CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 FUNCTIONAL DESCRIPTION . . . . . . . . .
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided,could result in death or serious injury.
GENERAL SAFETY RULES Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
GENERAL SAFETY RULES continued d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
ADDITIONAL SPECIFIC SAFETY RULES 1. 2. 3. 4. 5. 6. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2N 3 3N ........................ two-phase alternating current with neutral ........................ three-phase alternating current ........................ three-phase alternating current with neutral ........................ rated current of the appropriate fuse-link in amperes ........................ time-lag miniature fuse-link where X is the symbol for the time/current characteristic, as given in IEC 60127 ........................ protective earth ........................ class II tool .............
CARTON CONTENTS Carton contents include the drill, an auxiliary handle for models 2614 and 2615 only, an instruction manual, and a parts list. FUNCTIONAL DESCRIPTION FOREWORD Porter-Cable drills are designed to drill holes of various sizes in wood and metal as indicated in the following chart: MODEL # OF DRILL 2610 TYPE OF BIT Twist Drill MAX. DIA.
ATTACHING THE AUXILIARY HANDLE Hold the auxiliary handle as illustrated in Fig. 6. This grip helps you resist the rotational force and prevents accidental electrical shock, should you accidentally drill into a live wire. Use the auxiliary handle during all drilling operations. Disconnect tool from power source. 1. 2. 3. 4. 5. 6. Insert the square nut (A) Fig. 3 into the Fig. 3 A recess in the auxiliary handle (B).
3. Your tool will operate in either the forward direction (clockwise rotation) for drilling holes, or the reverse direction (counter-clockwise rotation) for releasing jammed drill bits. For counter-clockwise rotation, stop the motor by releasing the trigger switch. Push the reversing switch (C) Fig. 4 for counter-clockwise rotation, release the jam, then return to the switch to clockwise rotation for drilling. NOTE: Never attempt to change the direction of rotation while the switch is “ON”.
6. If the drill stalls or the bit becomes jammed in the hole, release the trigger immediately. Remove the drill bit from work and determine the cause of stalling or jamming. Do not squeeze the trigger “ON” AND “OFF” to free a stalled drill or jammed bit. This will damage the motor. You can reverse the direction of rotation to help free a jammed bit. Reset the direction of rotation before drilling. 7.
4. 5. 6. INSTALL THE CHUCK: Open the jaws of the replacement chuck as wide as possible. Thread the chuck on the spindle by turning the chuck clockwise. Hand tighten. Place a hex wrench (A) Fig. 8 in the chuck (B), and a 9/16" wrench (C) on the flats of the spindle. Tighten firmly by turning the chuck clockwise. Remove the hex wrench from the chuck. INSTALL THE CHUCK RETAINING SCREW: Turn the screw counterclockwise.Tighten securely. B A A C Fig. 7 Fig.
MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. Wear ANSI Z87.1 safety glasses while using compressed air. FAILURE TO START Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet.
ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier. Since accessories other than those offered by Porter-Cable•Delta have not been tested with this product, use of such accessories could be hazardous.
PORTER-CABLE • DELTA SERVICE CENTERS (CENTROS DE SERVICIO DE PORTER-CABLE • DELTA) (CENTRE DE SERVICE PORTER-CABLE • DELTA) Parts and Repair Service for Porter-Cable • Delta Power Tools are Available at These Locations (Obtenga Refaccion de Partes o Servicio para su Herramienta en los Siguientes Centros de Porter-Cable • Delta) (Locations où vous trouverez les pièces de rechange nécessaires ainsi qu’un service d’entretien) ARIZONA Tempe 85282 (Phoenix) 2400 West Southern Avenue Suite 105 Phone: (602) 437-12