ESPAÑOL: PÁGINA 15 FRANÇAISE : PAGE 29 Instruction manual Power Tool-Triggered Wet/Dry Vac MODEL 7812/7814 To learn more about Porter-Cable visit our website at: http://www.porter-cable.com IMPORTANT Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations. The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 GENERAL SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 CARTON CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 ASSEMBLY . . . . . . . . . . . .
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided,could result in death or serious injury.
GENERAL SAFETY RULES Read all instructions Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. NOTE: This vacuum is intended for commercial use. SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This Appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
GENERAL SAFETY RULES continued IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When using electric appliances, always follow basic safety precautions to reduce the risk of fire, electric shock and personal injury, including the following: BEFORE USING THIS APPLIANCE, READ AND FOLLOW ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Connect to a properly grounded outlet only (See Grounding Instructions).
MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C. current only. Refer to the specification plate on your tool for proper voltage and current rating. Do not operate your tool on a current on which the voltage is not within correct limits. Do not operate tools rated A.C. only on D.C. current.
FUNCTIONAL DESCRIPTION FOREWORD Porter-Cable Model 7812/7814 Wet/Dry Vacuum delivers 99.85% filtration efficiency which is great for fine particulate pick-up, like drywall or surface dust.
5. Set container upright, on its wheels. NOTE: If the Vacuum Cleaner is to be used to pick-up liquid or wet material, skip step 6. 6. Install the paper filter bag. Please note that the mounting hole is offset in the bag. The hole is closest to the top side of the bag. Position the bag (into the container), with its top side up, and seat mounting hole onto the container’s intake port. NOTE: Press only on the bag’s protective card. Be careful to not tear the bag. 7.
B A Fig. 4A C B Fig. 4B OPERATION The Porter-Cable Power Tool-Triggered Wet/Dry Vac is designed for use as a general purpose shop vacuum, or for use connected to various power tools. With the dust bag removed, it can be used to pick up water and other wet materials. A power outlet is provided that allows a power tool to be connected to the Vacuum Cleaner.
PARKING BRAKE Both models are equipped with a Parking Brake. The parking brake will lock one wheel to prevent the vacuum from rolling. To engage parking brake, use your toe to depress the brake button. The brake will snap into the locked position. To disengage parking brake, use your toe to pull up on the brake button until it snaps into the unlocked position. TOP FILTER Both models are equipped with a top filter. If vacuum efficiency is reduced (indicating a clogged filter), proceed as follows: 1.
NOTE: A small sponge filter is located next to the top filter. This filter helps to cool the motor. Check the filter on a regular basis. If it is dirty, clean it by blowing dry compressed air through it. DRY PICK-UP Do not pick up anything that is burning, smoldering, or smoking such as matches, cigarettes, or hot ashes. Do not use to vacuum combustible explosive materials, such as coal, grain, or other finely divided combustible material.
TROUBLESHOOTING For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Porter-Cable help line at 1-800-487-8665. MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. Wear ANSI Z87.1 safety glasses while using compressed air.
SERVICE REPLACEMENT PARTS When servicing use only identical replacement parts. For a service parts list or to learn more about Porter-Cable visit our website at www.porter-cable.com SERVICE AND REPAIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use. For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Customer Care Department at 1-800-487-8665.
WARRANTY PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
PORTER-CABLE • DELTA SERVICE CENTERS (CENTROS DE SERVICIO DE PORTER-CABLE • DELTA) (CENTRE DE SERVICE PORTER-CABLE • DELTA) Parts and Repair Service for Porter-Cable • Delta Power Tools are Available at These Locations (Obtenga Refaccion de Partes o Servicio para su Herramienta en los Siguientes Centros de Porter-Cable • Delta) (Locations où vous trouverez les pièces de rechange nécessaires ainsi qu’un service d’entretien) ARIZONA Tempe 85282 (Phoenix) 2400 West Southern Avenue Suite 105 Phone: (602) 437-12
