Installation Guide

8
INSTALLATION AND REMOVAL OF THE BATTERY PACK
TO INSTALL BATTERY PACK: Insertbatterypackintotheflashlightuntilanaudibleclick
is heard (Figure B).Makesurebatterypackisfullyseatedandfullylatchedintoposition.
TO REMOVE BATTERY PACK: Depressthebatteryreleasebutton(3)asshowninFigure
C andpullbatterypackoutoftheflashlight.
OPERATING INSTRUCTIONS
On/Off Button
1. To turn the light on, presstheon/offbutton(1)asshowninFigure D.
2. To turn the light off, press the button again.
PIVOTING THE LED LIGHT HOUSING - FIGURE E
1. The LED light housing (2) can be pivoted by rasing and lowering it to different positions
withinthe180degreepivotrange.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
•Lightwillnotilluminate. •Batterypacknotinstalledproperly. •Checkbatterypack 
installation.
    •Batterypacknotcharged.  •Checkbatterypack
        chargingrequirements.
•Batterypackwillnotcharge.•Batterypacknotinsertedintocharger.•Insertbatterypackinto
charger until LED illuminates.
    •Chargernotpluggedin.  •Plugchargerintoa
        workingoutlet.Referto
“Important Charging Notes”
for more details.
    •Surroundingairtemperature •Movechargerandbattery
    toohotortoocold.   packtoasurroundingair
temperature of above
       40degreesF(4,5°C)or
below 105 degrees F
        (+40,5°C).
•Unitshutsoffabruptly. •Batterypackhasreachedits •Allowbatterypacktocool
  maximumthermallimit.  down.
  •Outofcharge.(To •Placeonchargerand
maximize the life of the allow to charge.
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
For assistance with your product, visit our website at www.portercable.com for a list of service
centers,orcallthePORTER-CABLECustomerCareCenterat(888)848-5175.
THE RBRC™ SEAL
TheRBRC™(RechargeableBatteryRecyclingCorporation)SealontheLi-Ionbattery(or
batterypack)indicatesthatthecoststorecyclethebattery(orbatterypack)attheendof
its useful life have already been paid by PORTER-CABLE.
RBRC™ in cooperation with PORTER-CABLE and other battery users, has
established programs in the United States to facilitate the collection of spent
Li-Ionbatteries.Helpprotectourenvironmentandconservenaturalresources
by returning the spent Li-Ion battery to an authorized PORTER-CABLE service
center or to your local retailer for recycling. You may also contact your local
FUNCTIONAL DESCRIPTION
Figure A
1. On/Off button 2. Pivoting LED light housing
20V Max* Lithium-Ion Batteries: PCC680L, PCC685L, PCC681L
20V Max* Lithium-Ion Chargers: PCC690L, PCC691L, PCC695L
This product uses the batteries and chargers listed below.