Use and Care Guide

10
CARTON CONTENTS
TOOLS NEEDED FOR ASSEMBLY
UNPACKING AND CHECKING CONTENTS
Carefully unpack the drill press and all its
parts, and compare against the list below and
the illustration on the next page. Place the
drill press on a secure surface and examine
it carefully.
● To avoid injury from unexpected starting
or electrical shock, do not plug the
power cord into a source of power during
unpacking and assembly. The cord must
remain unplugged whenever you are
adjusting/assembling the drill press.
● The drill press is heavy and should
be lifted with care. If needed, get the
assistance of someone to lift and move
the drill press.
● If any part is missing or damaged, do not
attempt to assemble the drill press, or
plug in the power cord until the missing or
damaged part is correctly replaced.
TABLE OF LOOSE PARTS
WARNING
!
ITEM DESCRIPTION Q’TY
A.
Head Assembly
1
B.
Table Assembly
1
C.
Base
1
D.
Feed Handles
3
E.
Chuck & Key Hardware
Chuck
1
Chuck Key
1
F.
Column Assembly
1
G.
Hardware Bag
Lock Handle
1
Crank Handle
1
Worm Gear
1
Hex Wrenches
2
Hex Bolts
3
Rack
1
Rack Ring
1
H.
AA Batteries
2
Supplied Not Supplied
Slotted screwdriver
Adjustable wrenches
Wrench
3 mm hex key
Combination square
Block of wood
Hammer or rubber
mallet
4 mm hex key