Installation Guide

Carefully read and understand the information given in this manual before beginning the

assembly and installation. Failure to do so could lead to electric shock, fire or other injuries

which could be hazardous or even fatal.

1. All electrical connections must be in agreement with local codes, ordinances or the national

electric code (NEC). Contact your municipal building department to learn about your local

codes, permits and/or inspections. WARNING: RISK OF FIRE. MOST DWELLINGS BUILT

BEFORE 1985 HAVE SUPPLY WIRE RATED FOR 140°F. CONSULT A QUALIFIED

ELECTRICIAN BEFORE INSTALLATION.

2. TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning

installation by switching circuit breaker off or removing fuse.

3. DO NOT connect this fixture to an electrical system that does not provide a means for

equipment grounding. Never use a fixture in

a two-wire system that is not grounded.

WARNING: INSTALLING A FIXTURE INTO AN ELECTRICAL SYSTEM NOT HAVING A

PROPER GROUNDING MEANS COULD ALLOW ALL METAL PARTS OF THE FIXTURE TO

CARRY ELECTRICAL CURRENT IF ANY OF THE FIXTURE WIRES. WIRE CONNECTIONS OR

SPLICES BECOME BROKEN. CUT OR LOOSE DURING THE MOUNTING OR NORMAL

OPERATION OF THE FIXTURE. UNDER THIS CONDITION, ANYONE COMING IN CONTACT

WITH THE FIXTURE IS SUBJECT TO ELECTRICAL SHOCK, WHICH COULD CAUSE

SERIOUS INJURY OR DEATH.

4. If you are not sure your lighting system has a grounding means, DO NOT attempt to install

this fixture. Contact a qualified, licensed electrician for information with regards to proper

grounding methods as required by the local electrical code in your area.

5. DO NOT connect the bare or green insulation fixture ground

wire to the black (HOT) current-

carrying or white neutral house wire.

E Bottom Cover (preassembled to Top Cover (A))

F Wedge Base and Wire (preassembled to Fixture Cover (G))

G Fixture Cover (preassembled to Bottom Cover (E))

H Post

I Stake

J Connector (preassembled to Wedge Base and Wire (F))

SAFETY INFORMATION

HARDWARE CONTENTS

(not shown to size)

Bulb

Qty. 1

Bolt

Qty.3

(preassembled to Top Cover(A))