Installation Guide

WARNING:CONNECTION OF THE BARE OR GREEN FIXTURE GROUND WIRE TO THE
BLACK OR WHITE HOUSE WIRES MAY ALLOW ALL METAL PARTS OF THE FIXTURE TO
CARRY ELECTRICAL CURRENT. UNDER THIS CONDITION ANYONE COMING IN CONTACT
WITH THE FIXTURE WILL RECEIVE ELECTRICAL SHOCK, WHICH COULD CAUSE SERIOUS
INJURY OR DEATH.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 1 minute
Helpful Tools (not included): Trowel
7. All fixtures must be mounted to an outlet box that is supported by the building structure. DO
NOT attempt to support the fixture by ceiling board alone. Ceiling board alone does not have
the strength to support the weight of the fixture. The fixture may fall and cause personal injury.
8. BE CAREFUL not to damage or cut the wire insulation (covering) during fixture installation.
DO NOT permit wires to contact any surface having a sharp edge.To do so may damage or cut
the wire insulation, which could cause serious injury or death from electric shock.
9. DO NOT use lamps (bulbs) having a greater wattage than the maximum value stated on the
fixture. The use of a higher wattage lamp(s) than specified will increase temperature and cause
risk of fire.
10. Risk of Electric Shock. Install all luminaires 10 feet or more from a pool, spa, or fountain.
WARNING: WIRE CONNECTORS WILL NOT SUPPORT THE WEIGHT OF A FIXTURE.
SUSPENDING A FIXTURE BY THE HOUSE WIRES AND WIRE CONNECTORS WILL RESULT
IN THE FIXTURE FALLING, WITH THE POSSIBILITY OF PERSONAL INJURY AND DANGER
OF ELECTRICAL SHOCK OR FIRE.
6. DO NOT suspend any fixture by the house wires. A fixture must always be mounted directly
to an outlet box or to a mounting strip, which is first attached to the outlet box.
4