Use & Care Guide

54
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Hardware Used
1.Remove battery cover (F) and pull the tab. At the bottom
of solar panel (C), use the Brightness Selector
TM
switch
to choose a preferred working mode for your solar lights.
Working Modes:
2.Slide the solar panel (C) into the post (D).
Attach the post (D) to solar panel plastic stake (E).
Push the assembly rmly into ground.
CAUTION: DO NOT use a hammer. For
ground with hard soil, use a trowel (not included)
to loosen soil to prevent breaking the stakes.
For best performance, replace with rechargeable
3.2V Lithium (LiFePO4) battery every 3 years or
when performance diminishes.
Remove the battery cover (F) from solar panel (C).
Replace battery (AA) with a new rechargeable
battery. Replace the battery cover (F).
1
4
2
1
3
DD
DD
AA
B
LL
C
D
HH
C
E
A
LL
JJ
B
C
HH
A
4. Connect the solar heads (A) to the solar panel
(C) by one outlet. Push the assembly rmly into
ground.
Mode Light Output Runtime
6 Hours 15 lumens 6 hours
10 Hours 12 lumens 10 hours
3.Twist and secure stake (B) to the solar
head (A).
REPLACING BATTERY
Battery
x 1
Lowes.com/portfolio
Lowes.com/portfolio
AA
F
F
tab