Installation Guide

4
ASSEMBLY INSTRUCTIONS
Wire Connector
BB
x 3
Hardware Used
2. Attach shades (D) to socket cups on fixture
assembly (B), securing with preassembled socket
rings inside the shades (D).
3. Install light bulbs (not included).
Use 60-watt max. medium-base incandescent
bulbs or 13-watt max. medium-base CFLs.
4. Attach hook on interior of canopy of fixture
assembly (B) to loop on hanging strap (CC).
Make electrical connections using wire connectors
(BB). Refer to ELECTRICAL CONNECTIONS in the
Safety Information section on page 3.
5. Place the fixture assembly (B) against the
mounting surface, allowing the preassembled
screws on mounting bracket (A) to pass through
the canopy of the fixture assembly (B). Secure
with previously removed canopy nuts (C).
Adjust the adjustable arms of the fixture assembly
(B) to the desired position, then mark the
necessary locations for the support stems (FF) on
the ceiling.
2
3
E
4
5
6. Drill the two holes at the marked locations on
ceiling and install the plastic anchors (DD).
Unscrew busings from the support stems (FF).
Secure the bushings to the plastic anchors (DD)
with wood screws (EE), then thread support stems
(FF) onto bushings.
Lowes.com/portfolio
6
D
B
B
BB
A
B
C
CC
EE
DD
FF
Anchor
DD
x 2
Hardware Used
Wood Screw
EE
x 2
Support Stem
FF
x 2
Bushing
Ceiling
FF
Ceiling