Installation Guide

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7
PACKAGE CONTENTS
B
C
D E
A
A
B
1
3
Fixture
Glass Shade
C
1
Mounting Plate (preassembled to Fixture (A))
D
3
Socket Ring (preassembled to Fixture (A))
E
2
Cap Nut (preassembled to Fixture (A))
PART QUANTITYDESCRIPTION
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m.,
EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
A
C
E
White (neutral)
Black (hot)
Copper (ground)
Lock Washer
#8 Screw
or
E
A
C
Wire Nut x 3
#6 Screw x 2
x 2
x 2
3
4
BB
CC
AA
#8 Screw
Wire Nut
#6 Screw
PORT 2
PORT 3
PORT 1
D
Socket Ring
PORT 12
PART DESCRIPTION PART #
C
Mounting Plate
PORT 15
E
Cap Nut
PORT 4
B
Glass Shade
PORT 16
C
B
AA CCBB
EB1387
ED
2. Unscrew cap nuts (E) from fixture (A) and
remove mounting plate (C).
3. Depending on hole diameter in the outlet
box (not included), use #6 screws (AA) or
#8 screws (BB) and lock washers (DD) to
attach mounting plate (C) to the outlet box.
4. Strip 3/4 in. of insulation from wire ends. Twist
with pliers (not included), then connect the
wires, black to black (power), white to white
(neutral). Attach copper ground wire from
fixture (A) to branch circuit grounding
conductor. Attach wire nuts (CC). Tape wire
nuts (CC) and wires together.
5. Carefully tuck all wiring into outlet box. Place
fixture (A) against mounting plate (C), allowing the
threaded stems of the preassembled screws pass
through the fixture (A). Secure fixture (A) with cap
nuts (E).
6. Remove socket rings (D) from sockets of
fixture (A). Install glass shades (B), securing
with socket rings (D).
7. Insert three 60-watt max. medium-base
incandescent bulbs or 13-watt max. CFLs
(none included). Restore main power.
DANGER: BE CAREFUL not to damage or cut the wire insulation (covering) during fixture installation.
DO NOT permit wires to contact any surface having a sharp edge. To do so may damage or cut the
wire insulation which could cause serious injury or death from electric shock.
DO NOT use bulbs having a wattage greater than the maximum value stated on the fixture. The
use of a higher wattage bulb(s) than specified will increase temperatures and cause risk of fire.
If a dimmer control switch is used with this fixture, obtain professional advice to determine the
correct type and electrical rating required.
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram on page one. If any part is missing or damaged, do not attempt to assemble,
install or operate the product.
Estimated Assembly Time: 45 minutes
Items Required for Assembly (not included): Phillips screwdriver, wire strippers, pliers, electrical
tape, safety glasses, three 60-watt max. bulbs.
Tools Helpful for Assembly (not included): Ladder, level
32 4
INSTALLATION INSTRUCTIONS
MAIN
POWER
1. Shut off main power at the circuit breaker, or fuse
panel, before removing old fixture. Remove
old fixture and disconnect wiring.
ASSEMBLY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
5
6
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5
p.m., EST, Friday.
ITEM #0029436
MODEL #28624-3 BRZ
3-LIGHT VANITY BAR
Français p. 8
Español p. 15
7
Minor problems often can be fixed without an electrician. Before beginning work on the light, shut
off power supply to avoid electrical shock.
TROUBLESHOOTING
Bulbs will not light. 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace switch.
WARRANTY
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
DANGER – Carefully read and understand the information given in this manual before beginning
the assembly and installation. Failure to do so could lead to electric shock, fire, or other injuries,
which could be hazardous or even fatal.
All electrical connections must be in agreement with local codes, ordinances, or the National Electric
Code (NEC). Contact your municipal building department to learn about your local codes, permits,
and/or inspections.
TURN OFF ELECTRICITY at main fuse box, or circuit breaker box, before beginning installation by
switching circuit breaker off or removing fuse.
DO NOT connect this fixture to an electrical system that does not provide a means for equipment
grounding. Never use a fixture in a two-wire system that is not grounded.
WARNING: INSTALLING A FIXTURE INTO AN ELECTRICAL SYSTEM NOT HAVING
PROPER
GROUNDING MEANS COULD ALLOW ALL METAL PARTS OF THE FIXTURE TO CARRY ELECTRICAL
CURRENT. DO NOT ALLOW THE FIXTURE WIRES, WIRE CONNECTIONS, OR SPLICES TO
BECOME BROKEN, CUT, OR LOOSE DURING THE MOUNTING OR NORMAL OPERATION OF THE
FIXTURE. UNDER THIS CONDITION, ANYONE COMING IN CONTACT WITH THE FIXTURE IS
SUBJECT TO ELECTRICAL SHOCK, WHICH COULD CAUSE SERIOUS INJURY OR DEATH.
If you are not sure if the lighting system has grounding means, DO NOT attempt to install this fixture.
Contact a qualified, licensed electrician for information with regards to proper grounding methods as
required by the local electrical code in your area. DO NOT connect the bare, or green insulation
fixture, ground wire to the black (HOT) current carrying or white neutral house wire.
WARNING: CONNECTION OF THE BARE GROUND WIRE TO THE BLACK OR WHITE
HOUSE WIRES MAY ALLOW ALL METAL PARTS OF THE FIXTURE TO CARRY ELECTRICAL
CURRENT. UNDER THIS CONDITION, ANYONE COMING IN CONTACT WITH THE FIXTURE
WILL RECEIVE ELECTRICAL SHOCK, WHICH COULD CAUSE SERIOUS INJURY OR DEATH.
DO NOT suspend any fixture by the house wires. A fixture must always be mounted directly to an
outlet box or to a mounting strap, which is first attached to the outlet box.
WARNING: WIRE CONNECTORS WILL NOT SUPPORT THE WEIGHT OF A
FIXTURE. SUSPENDING A FIXTURE BY THE HOUSE WIRES AND WIRE CONNECTORS
WILL RESULT IN THE FIXTURE FALLING, WITH THE POSSIBILITY OF PERSONAL INJURY
AND THE DANGER OF ELECTRICAL SHOCK OR FIRE.
All fixtures must be mounted to an outlet box that is supported by the building structure. DO NOT
attempt to support the fixture by the wall board alone. The wall board alone does not have the
strength to support the weight of the fixture. The fixture may fall and cause personal injury.
SAFETY INFORMATION
SAFETY INFORMATION
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship
for one (1) year from the date of purchase. If within this period the product is found to be defective
in material or workmanship, the product must be returned, with a copy of the original sales receipt
as proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its
option, repair or replace the product to the consumer. This warranty does not cover fixtures becoming
defective due to misuse, accidental damage, improper handling and/or installation and specifically
excludes liability for direct, incidental or consequential damages. As some states do not allow
exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply
to you. This warranty gives you specific rights. You may have other rights that vary from state to state.
Portfolio® is a registered trademark of LF, LLC. All
Rights Reserved.
CARE AND MAINTENANCE
• Shut off main power supply when cleaning fixture.
• Wipe with damp, soft cloth.
• Do not use abrasive cleaners, as they may damage the finish.
Hardware Used
Hardware Used
CC
AA
BB
DD
2
1
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
5
Fuse blows or circuit trips
when light is turned on.
Crossed wires or power wire
is grounding out.
Check wire connections.
HARDWARE CONTENTS (shown actual size)
AA
#6 Screw
Qty. 2
CC
Wire Nut
Qty. 3
Lock Washer
Qty. 4
BB
#8 Screw
Qty. 2
DD
B
D
Printed in China
Lowes.com/portfolio
Portfolio
®
is a registered trademark of
LF, LLC. All rights reserved.
A
CC
C
DD
BB
AA
6
7
Lowes.com/portfolio
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Lowes.com/portfolio Lowes.com/portfolio Lowes.com/portfolio Lowes.com/portfolio Lowes.com/portfolio