Installation Guide

ASSEMBLY INSTRUCTIONS
Machine
Screw
x 2
BB
Hex Nut x 2
CC
DD
Hardware Used
5
BB
D
DD
CC
O
3. Connect mounting bracket (O) to outlet box (not
included) with machine screws (BB). Orient
mounting bracket (O) so the raised center
portion protrudes into the outlet box. Screw
threaded nipple (FF) into screw collar loop (D) a
minimum of 1/4 in. Lock in place with hex nut
(CC). Screw second hex nut (CC) to the center
of threaded nipple (FF) and screw into mounting
bracket (O).
4. Pass canopy (A) over the screw collar loop (D).
Turn the screw collar loop (D) in or out of the
mounting bracket (O) until 1/2 of the screw collar
loop (D) exterior threads are exposed. After a
desired position is found, tighten second hex nut
(CC) up against the mounting bracket (O) to
secure the threaded nipple (DD) in place. Attach
screw collar ring (B) to screw collar loop (D).
3
Lowes.com/portfolio
Outlet
Box
x 1
Threaded
Nipple
D
DD
CC
O
B
4