Installation Guide

ASSEMBLY INSTRUCTIONS
5
Threaded
Knobs
x 2
x 2
Long
Machine
Screws
DD
CC
x 1
EE
Mounting
Bracket
Hardware Used
DD
EE
CC
4
3. Supply wire connection guide: Make wire connections, securing with wire connectors (AA),
following the reference chart listed below.
CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:
Black White
* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor
3
Hardware Used
x 2
Wire Connectors
AA
*NOTE:
When parallel wire (SPT I & SPT II) is used. The neutral
wire is square shaped and ridged and the hot wire will be
round in shape and smooth. (See Fig. 3.)
4. Pass the canopy (A) over the long machine
screws (CC) protruding from the mounting
bracket (EE) and secure in place with threaded
knobs (DD). (See Fig. 4.)
GND
x 2GG Washer
GG