Installation Guide

4
ASSEMBLY INSTRUCTIONS
2. Insert long machine screws (CC) into the
mounting bracket (L) before connecting
to the outlet box. The long machine screws (CC)
should protrude through mounting bracket (L)
for securing canopy (A) in later steps. Connect
the mounting bracket (L) to the outlet box with
short machine screws (BB). The mounting
bracket (L) must be positioned with the extruded
face, which protrudes out the back of the
mounting bracket (L), going into the outlet box.
Short Machine
Screw
x 2
BB
2
CC
Outlet Box
L
BB
Lowes.com/portfolio
Hardware Used
Hardware Used
x 2
Long
Machine
Screw
CC
1a. Attach long machine screws (CC) to the threaded
holes in mounting bracket (L) that align with the
mounting holes in the canopy of fixture (A).
Do not install the canopy at this time.
1b. NOTE: Long machine screws (CC) are purposely
longer than needed for most installations. The
position of the junction box attachment point and
thickness of the drywall will vary from home to home.
When the threaded knobs (DD) are tightened the
screw heads will self-adjust and back out of the
mounting bracket (L).
1a 1b
A
DD
A
CC
CC
L