ITEM #0806082 FLUSHMOUNT CEILING FIXTURE PORTFOLIO® and PORTFOLIO & DesignTM are trademarks or registered trademarks of LF, LLC. All rights reserved. MODEL #CLL01PNK Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE E108082 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday.
PACKAGE CONTENTS PART A B C D E F G H I DESCRIPTION Fixture Glass Shade Mounting Strap Fixture Screw Threaded Rod Rubber Washer (preassembled to threaded rod (E)) Nut (preassembled to threaded rod (E) Finial Plate Finial (preassembled to threaded rod (E)) QUANTITY 1 1 1 2 1 1 A B 2 C 1 1 D E F G I H HARDWARE CONTENTS (shown actual size) AA Wire Connector BB Machine Screw Qty. 3 Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS.
SAFETY INFORMATION DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an electrical system not having a proper grounding means could cause metal parts of the fixture to carry electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or loose during the mounting or normal operation of the fixture.
SAFETY INFORMATION CAUTION • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing the fuse (or switching the circuit breaker off). • If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture. Contact a qualified, licensed electrician for information regarding the proper grounding methods as required by the local electrical code in your area.
ASSEMBLY INSTRUCTIONS 2. Remove existing fixture and disconnect all electrical wiring. 2 3. Insert fixture screws (D) two full turns into screw holes on the mounting strap (C). 3 Outlet Box C D D 4. Attach mounting strap (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
ASSEMBLY INSTRUCTIONS 5. Unwrap BARE fixture wire from BLACK and WHITE fixture wires. Prepare wire by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 7. Remove finial (I), nut (G) and rubber washer (F) from threaded rod (E). Save all for later use. 7 A Adjust other nut (G) to middle of threaded rod (E). Attach threaded rod (E) to fixture (A) and tighten threaded rod (E) with pliers (not included) -- hold pliers just under nut (G) so as not to strip threads on threaded rod (E). Once threaded rod (E) is completely tightened, use pliers to secure nut (G) to bottom of fixture (A). G E F G I 8.
ASSEMBLY INSTRUCTIONS 10. Restore power and test fixture (A). 10 A If light does not function, please refer to the TROUBLESHOOTING guide below. CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. • Total wattage for this fixture is 19 watts; do not attempt to replace the LEDs. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock.