Installation Guide

ManualsBrandsPortfolio ManualsPendant LightingCPL1-1PNK

MINI PENDANT

Français p. 9

Español p. 18

Portfolio® is a registered trademark

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

ATTACH YOUR RECEIPT HERE

Serial Number

Purchase Date

ITEM #0749835

MODEL #CPL1-1PNK

EB15442

Lowes.com/

ortfolio

3187807

Summary of content (8 pages)

PAGE 1
ITEM #0749835 MINI PENDANT Portfolio® is a registered trademark of LF, LLC. All Rights Reserved. MODEL #CPL1-1PNK Français p. 9 Español p. 18 ATTACH YOUR RECEIPT HERE Serial Number 3187807 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. EB15442 Lowes.
PAGE 2
PACKAGE CONTENTS PART DESCRIPTION QUANTITY A B Fixture Mounting Strap (preassembled to fixture (A)) Mounting Strap Screw (preassembled to mounting strap (B)) Glass Shade Spacer (preassembled to fixture (A)) Socket Ring (preassembled to fixture (A)) 1 1 C D E F A B C 2 1 1 D 1 E F HARDWARE CONTENTS (shown actual size) AA E3 Wire Connector BB Machine Screw Qty. 3 Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS.
PAGE 3
SAFETY INFORMATION DANGER • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PAGE 4
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to install, operate or assemble the product.
PAGE 5
ASSEMBLY INSTRUCTIONS 3. Remove mounting strap (B) from fixture (A) by removing mounting strap screws (C) from the edges of the fixture (A). Save mounting strap screws (C) for later use. 3 B C C A 4. Attach mounting strap (B) to outlet box (not included) using the existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult with a licensed electrician before proceeding.
PAGE 6
ASSEMBLY INSTRUCTIONS 6. You may need to cut the excess wire to simplify the wiring. You will need at least 10 in. of wire to work with. 6 10 inches Prepare wire by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Tie wire into a knot. A 7. Connect BARE/GREEN ground wire from outlet box to BARE wire from mounting strap (B) using wire connector (AA).
PAGE 7
ASSEMBLY INSTRUCTIONS 8. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire. 8 Outlet Box WARNING: Make sure no bare wire or wire strands are visible after making connections. AA AA AA 9. Carefully arrange excess wiring and wire connectors (AA) within canopy at top of fixture (A). 9 Outlet Box Align holes in edge of canopy with screw holes at ends of mounting strap (B).
PAGE 8
ASSEMBLY INSTRUCTIONS 11. Restore power and test fixture (A). 11 A If light does not function, please refer to TROUBLESHOOTING below. CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. • Total wattage for this fixture is 12 watts; do not attempt to replace the LEDs. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock.