Installation Guide

ManualsBrandsPortfolio ManualsWall SconcesFB07-040

ITEM #0077923

WALL SCONCE

WITH OUTLET

MODEL #FB07-040

Français p. 8

Español p. 15

ATTACH YOUR RECEIPT HERE

EB1696

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

Serial Number

Purchase Date

PORTFOLIO

and PORTFOLIO & Design

are

trademarks or registered trademark of LF, LLC. All

rights reserved.

Summary of content (4 pages)

PAGE 1
ITEM #0077923 WALL SCONCE WITH OUTLET PORTFOLIO® and PORTFOLIO & DesignTM are trademarks or registered trademark of LF, LLC. All rights reserved. MODEL #FB07-040 Français p. 8 Español p. 15 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday.
PAGE 2
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) B AA C B BB Machine screw A B Mounting screw (preassembled to Crossbar (DD)) B CC B DD Wire nut Qty. 3 Qty. 2 Crossbar (Not actual size) Qty. 1 Qty. 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
PAGE 3
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Attach the crossbar (DD) to the outlet box (not included) using two machine screws (BB). 4. Remove mounting screws (AA) from crossbar (DD). Place the fixture (A) over the outlet box. Insert mounting screws (AA) to secure fixture (A). 1 4 BB Hardware Used B Machine screw BB x2 B Crossbar DD DD Hardware Used B Mounting screw AA x1 A x2 AA 2. Strip 3/4 in. of insulation from wire ends.
PAGE 4
CARE AND MAINTENANCE WARRANTY • Shut off main power supply before wiping product with damp cloth or window cleaner. Do not use abrasives. TROUBLESHOOTING PROBLEM Bulb won’t light. Fuse blows or circuit breaker trips when light is turned on. POSSIBLE CAUSE CORRECTIVE ACTION 1. Replace light bulb. 2. Make sure power supply is on. 3. Check wiring. 4. Test or replace switch. 1. Bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch.