Installation Guide

4
5
6
ASSEMBLY INSTRUCTIONS
5
4. Place the fixture (A) over the outlet box. Allow
heads of long mounting screws (CC) to come
out through the large ends of the key holes.
Twist fixture (A) until heads of long mounting
screws (CC) slide into narrow ends of key
holes. Tighten long mounting screws (CC) to
secure fixture (A).
5. Install light bulbs (not included). Use only
60-watt or less standard-base bulbs or
13-watt standard-base CFL bulbs.
6.
Remove knob (H), cap (G), nut (F) , rubber
ring (D) and washer (C) from the threaded
nipple (B).
Tighten the threaded nipple (B) into
the fixture (A). Place the washer (C), rubber
ring (D), and glass shade (E) onto the threaded
nipple (B). Tighten with nut (F) and place the
cap (G) onto the threaded nipple (B). Tighten
with knob (H).
Hardware Used
CC
Long mounting screw
x 2
A
CC
A
B
E
C
F
H
D
G