Installation Guide

ManualsBrandsPortfolio ManualsVanity LightsFS141117-3

ITEM #0756819

MODEL #FS141117-3

Français p. 8

Español p. 15

ATTACH YOUR RECEIPT HERE

EB15621

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

Serial Number

Purchase Date

Lowes.com/portfolio

3-LIGHT VANITY BAR

Summary of content (4 pages)

PAGE 1
ITEM #0756819 3-LIGHT VANITY BAR MODEL #FS141117-3 Français p. 8 Español p. 15 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday. EB15621 1 Lowes.
PAGE 2
HARDWARE CONTENTS (shown actual size) PACKAGE CONTENTS B AA B BB B CC B DD Machine screw Crossbar (Not actual size) Qty. 2 Qty. 1 Cap nut BA (preassembled to Crossbar (DD)) Wire nut Qty. 3 Qty. 2 SAFETY INFORMATION BB Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
PAGE 3
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Remove cap nuts (AA) from the preassembled mounting screws on crossbar (DD). Attach crossbar (DD) to the outlet box (not included) with machine screws (CC). Note: The mounting screws should protrude away from the outlet box. 1 DD AA Hardware Used B Cap nut AA x2 B Machine screw CC x2 B Crossbar DD x1 2. Strip 3/4 in. of insulation from wire ends.
PAGE 4
WARRANTY CARE AND MAINTENANCE • Shut off main power supply before wiping product with damp cloth or window cleaner. Do not use abrasives. TROUBLESHOOTING PROBLEM Bulb won’t light. Fuse blows or circuit breaker trips when light is turned on. POSSIBLE CAUSE CORRECTIVE ACTION 1. Replace light bulb. 2. Make sure power supply is on. 3. Check wiring. 4. Test or replace switch. 1. Bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch.