Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Cap nut
Machine screw
Mounting screw
Crossbar
x 2
x 2
x 2
x 1
x 3
x 2
x 2
3. Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
Wire nut
Cap nut
Mounting screw
B
AA
B
CC
B
B
DD
EE
B
B
BB
AA
BB
ASSEMBLY INSTRUCTIONS
4
5
6
6. Install light bulbs (not included). Use three
60-watt max. standard-base bulbs or three
13-watt standard-base CFL bulbs.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
EE
AA
A
C
B
AA
DD
CC
DD
4 5
B
DD
Lowes.com/portfolio Lowes.com/portfolio
or
1. Remove cap nuts (AA) from mounting screws (DD)
preassembled to crossbar (EE). Attach crossbar
(EE) to the outlet box (not included) with machine
screws (CC). Note: The mounting screws (DD)
should protrude away from the outlet box.
4. Place xture (A) onto mounting screws (DD).
Secure with cap nuts (AA). Note: The xture
(A) can be installed with the sockets facing up
or down.
5. Remove socket rings (B). Install glass shades (C)
over sockets of xture (A), then secure with socket
rings (B).
A