Installation Guide

5
4
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
1
2
3
Screw
Machine screw
Crossbar
x 2
x 2
x 1
x 3
1. Remove screws (AA) from crossbar (DD) and
save for later use. Attach the crossbar (DD) to
the outlet box (not included) with machine
screws (CC).
3. Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
Wire nut
B
AA
B
CC
B
DD
B
BB
BB
ASSEMBLY INSTRUCTIONS
4
5. Remove socket rings (B) with tool (EE). Install
glass shades (C) over sockets of xture (A), then
secure with socket rings (B) by using tool (EE).
5
6
4. Place the xture (A) over the outlet box. Secure
with screws (AA) previously removed.
6. Install light bulbs (not included). Use three
60-watt max. standard-base bulbs or three
13-watt standard-base CFL bulbs.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
DD
AA
A
C
A
B
EE
AA
CC
Lowes.com/portfolio Lowes.com/portfolio
or
Hardware Used
x 1
Tool
B
EE