Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Cap nut
Machine screw
Mounting screw
x 2
x 2
x 2
x 1
x 3
x 2
x 2
Wire nut
Cap nut
Mounting screw
B
AA
B
CC
B
B
DD
EE
B
B
BB
AA
BB
ASSEMBLY INSTRUCTIONS
4
5
6
6. Install light bulbs (not included). Use three
60-watt max. standard-base bulbs or three
13-watt standard-base CFL bulbs.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
B
C
AA
DD
A
4 5
B
DD
Lowes.com/portfolio Lowes.com/portfolio
or
4. Place xture (A) onto mounting screws (DD).
Secure with previously removed cap nuts (AA).
Note: The xture (A) can be installed with the
sockets facing up or down.
5. Remove socket rings (B). Install glass shades (C)
over sockets of xture (A), then secure with socket
rings (B).
A
3. Attach wire nuts (BB) to connections.
Tape wire nuts (BB) and wires together with
electrical tape (not included).
DD
AA
CC
EE
Mounting bracket
1. Remove cap nuts (AA) from mounting screws (DD)
preassembled to mounting bracket (EE). Attach
mounting bracket (EE) to the outlet box (not
included) with machine screws (CC). Note: The
mounting screws (DD) should protrude away from
the outlet box.