Installation Guide

ManualsBrandsPortfolio ManualsOutdoor Wall LightsFY09-010

Table Of Contents

ITEM #0048398

0048583

OVAL DECK LIGHT

MODEL #FY09-010

FY09-011

Français p. 8

Español p. 15

ATTACH YOUR RECEIPT HERE

EB14728

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

Serial Number

Purchase Date

Portfolio

is a registered trademark of LF,

Lowes.com/portfolio

Summary of content (4 pages)

PAGE 1
ITEM #0048398 0048583 OVAL DECK LIGHT Portfolio® is a registered trademark of LF, LLC. All rights reserved. MODEL #FY09-010 FY09-011 Français p. 8 Español p. 15 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday. EB14728 1 Lowes.
PAGE 2
PACKAGE CONTENTS HARDWARE CONTENTS (shown actual size) B AA B BB B CC B DD Cap nut (preassembled to Mounting bracket (AA)) Wire nut A Mounting bracket (Not actual size) Qty. 1 Qty. 3 Mounting screw Qty. 2 Qty. 1 SAFETY INFORMATION B C D Please read and understand this entire manual before attempting to assemble, operate or install the product.
PAGE 3
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Remove cap nut (BB) from mounting bracket (AA). Attach mounting bracket (AA) to the outlet box (not included) with mounting screws (DD). Note: The preassembled screw on mounting bracket (AA) should protrude away from the outlet box. 1 AA 4. Attach wire nuts (CC). Tape wire nuts (CC) and wires together. DD Hardware Used Hardware Used BB B Mounting bracket AA x2 B Cap nut BB x1 B Mounting screw DD x2 2.
PAGE 4
ASSEMBLY INSTRUCTIONS WARRANTY 7. Put glass shade (B) into cage (C). Place cage (C) onto the deck plate (A). Secure with thumbscrews (D). 7 A B C D • Note: Before use, add silicone glass sealant between the ceiling and the canopy to completely cover the gap. CARE AND MAINTENANCE • Shut off main power supply before wiping product with damp cloth or window cleaner. Do not use abrasives. Bulb won’t light. Fuse blows or circuit breaker trips when light is turned on.