Installation Guide

PACKAGE CONTENTS

Part Description Quantity

Fixture Pan

Bulb Socket

Diffuser Thumb Screw

(preassembled to Fixture Pan (A))

Part Description Quantity

Diffuser

Bulb

HARDWARE CONTENTS

WARNINGS AND CAUTIONS

WARNING

• Shut off power at the circuit breaker or fuse panel before removing the old fixture or

installing the new one.

CAUTION

• DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you presently have dimmer controls,

you will need to remove them and replace them with regular electrical switches. If you have a three-

way dimmer, you will have to replace it with a regular three-way switch. If you are unfamiliar with

electrical installations, it is recommended you have a qualified electrician do your installation.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to

assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 30 minutes

Tools Required for Assembly: Phillips head screwdriver, flathead screwdriver, safety glasses,

electrical tape, pliers, wire cutters, wire strippers, step ladder (not included).

LAMP CONTAINS MERCURY

Manage in accordance with Spills, Disposal and Site Cleanup Requirements

www.lamprecycle.org or 1-866-326-BULB

www.epa.gov/mercury/spills/index.htm#fluorescent

Wire Nut

Qty. 3

1-1/2 in.

Machine Screw

Qty. 2